Liquid Cooling Case Gallery

[Trox]

What is the name of that led lightining?

[matt220]

Four Simple Rules:

1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
3) Do not quote images,
4) Finished cases only, no worklogs.

pakitoesp, please just link to the other 20 pictures you posted

[pakitoesp]

pakitoesp, please just link to the other 20 pictures you posted

Ok edit

[nksharp]

rad>cpu>mofset>ram>northbridge>ram>gpu>res?

So many tubes :o

Still need to figure out what the hell to do with my tj11 WC build

[oXcoRe]

[Capt Proton]

Then you get posts like #5150 and then you get 4-6 retards that quote it to say "nice job" or ask a question and then you wind up scrolling the same 20 images for an entire page. The rules were asked for after we got tired of doing that in the last gallery.

Such a kind, diplomatic fellow. Never trying to foist his opinion on anyone else. Thank goodness for people like him who help keep this from becoming another Real Red Raider site.

[crash5s]

Bad photography, waiting on new camera for the final pics and then to clean up wiring

[3lfk1ng]

^Could use some serious custom length cables.

[diablo2424]

After waiting what seemed like forever (2 months) on back ordered Bitspower Rad Bracket, I finally got my rig back up and running recently!

Before I started the wiring:


First turn on. (in BIOS to check temps):


Running!

[crazyg0od33]

great rig, calendar not so much NYR!

[crash5s]

^Could use some serious custom length cables.

It's actually moving to a bigger case as well and something else is going in this one. I'm just lazy atm.

[Erklat]

/snip

Way too long tubing for cpu block only loop.

[xFEARx3]

Outdoor Pics

[Waterlogged]

Bad photography, waiting on new camera for the final pics and then to clean up wiring

[IMG]snip[/IMG]
[IMG]snip[/IMG]
[IMG]snip[/IMG]

Is that a Sentinel from "Matrix" in your computer?. . .RUN!!!

[Erklat]

Very sleek Fear!

So much inspiration in this thread it's almost overwhelming

[lowfat]

[deltatechx]

My second build; gaming rig, media server, and HTPC crammed into a Thermaltake V6 mid-tower. i7-2600k @ 4.8 ghz, idles at 30c and hits 62c at full load. I'm currently using Primochill UV Brite Green but I'm thinking about switching to Mayhems' Pastel Mint Green and white cold cathode lights. I also may SLI a second EVGA GTX560Ti in the near future depending on how it runs MW3 and Skyrim, but other than that it's finally finished







Still rocking the Zalman Reserator I removed the internal pump and replaced all of the fittings with Bitspower 1/2" ID barbs. I have a couple of Bitspower 1/2" ID 3/4" OD compression fittings for the inlet and outlet but I'll have to modify the Reserator for them to fit.

[Makymaco]

Link

To lowfat : Very classy case. Is it a very 180 x 3 ?

[Makymaco]

Link

To lowfat : Very classy case. Is it a 180*3 ?

[Alexandr0s]

Amazing case Lowfat! For a second I thought you posted in the wrong thread because it seriously looked like a render, it was that clean. Great job .

[wanlapa]

hi good morning

[lowfat]

To lowfat : Very classy case. Is it a 180*3 ?

Yes. Magicool Slim 540.

[andressergio]

this is my HAF X build the before and after i had a Black Ice GTX360 rad and Apogee XT now i put an XPSC RX480 rad and Apogee HD

before see how tubes fall to the inlet/outlet of rad i corrected that on new build






after







Uploaded with ImageShack.us

hope u like it

[andressergio]

My second build; gaming rig, media server, and HTPC crammed into a Thermaltake V6 mid-tower. i7-2600k @ 4.8 ghz, idles at 30c and hits 62c at full load. I'm currently using Primochill UV Brite Green but I'm thinking about switching to Mayhems' Pastel Mint Green and white cold cathode lights. I also may SLI a second EVGA GTX560Ti in the near future depending on how it runs MW3 and Skyrim, but other than that it's finally finished

Still rocking the Zalman Reserator I removed the internal pump and replaced all of the fittings with Bitspower 1/2" ID barbs. I have a couple of Bitspower 1/2" ID 3/4" OD compression fittings for the inlet and outlet but I'll have to modify the Reserator for them to fit.

very nice mate i always wanted to take rad far of the PC

[andressergio]

low thats very nice i guess if you leave it there u wont have cooling probs lol