Here is one old pic from the raer: http://www.xtremesystems.org/forums/...&postcount=197
ugly as hell but it works and its really not ment to be displayed anyway..
Here is one old pic from the raer: http://www.xtremesystems.org/forums/...&postcount=197
ugly as hell but it works and its really not ment to be displayed anyway..
Hi!
It's been an year since i assembled my kit (http://www.xtremesystems.org/forums/...d.php?t=246368) and now i have to change the loop to put a 5970 with WC block (Danger Den) on it.
The question is, can i mount the CPU block upside down? This would help me a lot with tubing management...
All http://www.swiftnets.com/products/APOGEE-XT.asp says is that the side (both sides has 3 screws) with 3 screws must be parallel to CPU locking lever...
Thank you!
Something very old..........
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
@McBacker - Nice setup very clean looking. I'm curious about the cage over you memory though, is it some sort of EMF protection? If so have you noticed any difference with/without it?
I've been curious about playing around with that sort of thing but never found the time, some components can put out a fair bit of EMF noise (eg high current switched circuits, PSU, etc) so I figured it might give you a bit of extra head room on the overclocks if you could block out the main sources.
it's a memory cooler from OCZ
http://www.ocztechnology.com/product...ocz_xtc_cooler
Abit Aw9D Max - Intel E6600 - 2gb Cellshock DDR2 800 4-4-4-12 - BFG 8800GTS - 2x WD Raptor 150gb
Zippy PSL-6850p G1 - Pioneer DVR-S15J - LiteOn DH-20A4P
Cooling by: Loop 1 Ybris A.C.S. - Danger Den Maze4 - HWLabsGTX360 - Laing D5 - EK RES 150
Loop 2 DTek Fuzion gfx - Aircube X2 360 -Laing D5 - Case Custom
New V2000 case +- finished
http://i51.tinypic.com/301ehd4.jpg
Duality: Q9550 - P5Q Deluxe - 8GB OCZ - HD5850 - 4,64TB WD - HX650 - X-fi - Aquaero 4 - Lian Li V1000b II Plus @Dual loops watercooling
Loop 1 => DDC18w w/ EK X-top V2 - EK Supreme HF - EK FC5850 - PA120.3 - Multires 150
Loop 2 => DDC18w w/ EK X-top V2 - PA120.1 - MIPS mosfet 1&2 - mips NB - Mips Ramfreezer 4 - MIPS SB - Multires 150
Ever consider painting or polishing the interior? It would look uber pimp if done.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Midplate and moboplate are polished, tough the dust has left his mark ^^, bays are just "brushed".
Duality: Q9550 - P5Q Deluxe - 8GB OCZ - HD5850 - 4,64TB WD - HX650 - X-fi - Aquaero 4 - Lian Li V1000b II Plus @Dual loops watercooling
Loop 1 => DDC18w w/ EK X-top V2 - EK Supreme HF - EK FC5850 - PA120.3 - Multires 150
Loop 2 => DDC18w w/ EK X-top V2 - PA120.1 - MIPS mosfet 1&2 - mips NB - Mips Ramfreezer 4 - MIPS SB - Multires 150
core i5 760
Asus P7P55D-E
Corsair Dominator DDR3 PC3-12800 - 2 x 2 Go
ATI HD5870 1GO PCIe
SSD Corsair F60
Hitachi 1TO
Corsair HX650w
Silverstone TJ07
CPU : Swiftech Apogee XT
GPU : Swiftech Komodo HD5800
Pompe : Swiftech MCP655-B + EK-D5 X-TOP V2
Radiateur : EK RAD-XT 480
Réservoir : EK Multioptions 150
PC1 / 7 2600K || Asus Maximus IV Extreme || Corsair Dominator DDR3 PC3-12800 - 4 x 2 Go || GeForce GTX 590 3Go PCIe || SSD Corsair F60 || OCZ ZX 1000W || Silverstone TJ07
PC2 / i7 965 extreme edition || Asus Rampage 2 Extreme || DDR3 OCZ Reaper Edition 12800 3*2Go || Crossfire ATI HD5870 1GO PCIe || SSD 32GO || Corsair HX 650w || Corsair 800D
Nice build Allways nice to see TJ07
mato78.com - Finnish PC Hardware news & reviews
System:1
Banchetto
I7 860 4.2Ghz | Asus Maximus III Formula | EVGA 2 GTX295's | 4Gb (2x2Gb) Dominator GT Ram @ 2000 8-9-8-24-1T | OCZ RevoDrive3 120Gb SSD | Barracuda 500Gb HDD
W/C System
Apogee XT | EK-FC285 Nickel| Thermochill PA 120.3 | TFC Xtender Shrouds |DD Monsoon Premium D5 Dual Bay Reservoir | MCP655-B|Noctua NF-P12| HydrX | B*P Compression Fittings
System:2
Sunbeamtech Ultra-Tech Station
I7 875K 4.4Ghz | EVGA P55 LE | PNY Quadro FX4800 | 4Gb (2x2Gb) Dominator Ram @ 1600 8-8-8-24-2T | 2 OCZ Vertex2 60Gb SSD RAID 0 | Barracuda 500Gb HDD
W/C System
Apogee XT | DD Koosah | 2 Thermochill PA 120.1 | TFC Xtender Shrouds | EK-DDC X-RES 100 | MCP350 | Noctua NF-P12 | Indigo Xtreme | HydrX | B*P Compression Fittings
System Videos
This is the second Sunbeam I've seen and may just have to get me one!! It is very close to something I had "mentally" ( ) sketched out....
Nice set up there!!
Last edited by jedihobbit; 01-20-2011 at 05:44 PM. Reason: mispelink
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
Snap on the GPU! Though I'll be popping an EK block on mine, that's a great idea using green fluid to of-set the PCB colour looks really sharp... well, as sharp as green PCB's can look anyway :p
System:1
Banchetto
I7 860 4.2Ghz | Asus Maximus III Formula | EVGA 2 GTX295's | 4Gb (2x2Gb) Dominator GT Ram @ 2000 8-9-8-24-1T | OCZ RevoDrive3 120Gb SSD | Barracuda 500Gb HDD
W/C System
Apogee XT | EK-FC285 Nickel| Thermochill PA 120.3 | TFC Xtender Shrouds |DD Monsoon Premium D5 Dual Bay Reservoir | MCP655-B|Noctua NF-P12| HydrX | B*P Compression Fittings
System:2
Sunbeamtech Ultra-Tech Station
I7 875K 4.4Ghz | EVGA P55 LE | PNY Quadro FX4800 | 4Gb (2x2Gb) Dominator Ram @ 1600 8-8-8-24-2T | 2 OCZ Vertex2 60Gb SSD RAID 0 | Barracuda 500Gb HDD
W/C System
Apogee XT | DD Koosah | 2 Thermochill PA 120.1 | TFC Xtender Shrouds | EK-DDC X-RES 100 | MCP350 | Noctua NF-P12 | Indigo Xtreme | HydrX | B*P Compression Fittings
System Videos
Internal Watercooling Antec 900 Build Log*
WC loop: Black ice extreme 240 radiator, XSPC 120 radiator, HK 3.0, D5 pump with Bitspower top, DD fillport, Primochill tubing, distilled + ptnuke
Pink Floyd is #1
Looks good
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
My wet alien build last year...now changed to v2 (see next post)
Last edited by CSingh; 01-21-2011 at 10:45 AM.
Wet Alien v2....Modded the silverstone Fortress FT02 case for quad rad....components are same as before (i7 920 @ 4.2 / 6gb 2000mhz / gtx 295)...with the addition of OCZ vertex 2
Also changed the fans to simple yate loons 1350rpm
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
Bookmarks