Liquid Cooling Case Gallery

**koonkub** · 10-18-2010, 04:40 AM

Originally Posted by >!eNg_*

My V1000B อิอิ

Hay. My friend.

**scgt1** · 10-18-2010, 04:43 AM

Originally Posted by koonkub

Hay. My friend.

Please remove the picture links from your post.

Four Simple Rules:

1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
3) Do not quote images,
4) Finished cases only, no worklogs.

Optionally, it would be nice if you could list your water cooling components.

**@rne** · 10-18-2010, 12:58 PM

Not really a hole case, rather a small unit for my testrig. Build within an hour.

Eheim Station 600, Alphacool Yellowstone "Classi, ROG Edition", Clearflex 13/10mm, old Nexos triple radiator.

**bundymania** · 10-21-2010, 03:41 AM

**rintamarotta** · 10-21-2010, 04:39 AM

O nice, hmm Litle Devil graphics card backplate? I been missing something?

Still cleaning up my own build, water cooling tubes going around everywhere need get them hidden before posting pics.

**Th-I3riG02** · 10-21-2010, 04:48 AM

DOOOD! nice build!

that's awsome clean! i aprove!

**Blackstare** · 10-21-2010, 09:16 AM

Ok, I finally completed my build

**Screamer** · 10-22-2010, 01:21 PM

and some new pictures from me

more in Gallery

**Mudgey** · 10-22-2010, 01:44 PM

That is absolutely awesome Screamer!!! But how on earth do you get your tubes to not kink??

**Johnmark** · 10-22-2010, 01:59 PM

Screamer, VERY nice build and nice pics! I too want to know how you got those tight radius bends without kinking? What tubing did you use?

Also looks like in your parts pics, that u used some Bitspower swivels, did you find that any of them leaked on you? I'm having some trouble with a batch of their 90's leaking at the swivel and after wetting down my board twice now am VERY leary of using them.

**Systemlord** · 10-22-2010, 02:12 PM

Screamer I'm speechless, what a killer build! How many radiators can the case really fit underneath with your PSU? Sure if you needed say an extra 240 it would fit right? Spent some time in your gallary, very impressive!

-Systemlord

**Barr3l Rid3r** · 10-22-2010, 03:20 PM

Originally Posted by Blackstare

Ok, I finally completed my build

Nice to see another modded CM around, here goes mine.

**Barr3l Rid3r** · 10-22-2010, 03:26 PM

Vantage Solo

**bobruto** · 10-23-2010, 01:27 AM

@Barr3l Rid3r

How hot does your chipset run with these clocks and voltages?
My guess is you should be able to melt lead on it, cause mine is pretty hot on a 790X with just a slow side fan blowing at it and far humbler clocks/voltages

**Screamer** · 10-23-2010, 02:57 AM

Thanks Guys

Mudgey, Johnmark
I use Tygon 15,9/9,5mm. It's very flexible and can be really tight cambered. It's the best tube which I had.

Regarding Bitspower swivels I had only one bad unit but it was the old version (cube)

Systemlord
I have two radiators: 480 in "basement" and 240 in 5,25" bays. At the bottom except 480 will fit another 240 radiator, but will be no place for HDD.

**Systemlord** · 10-23-2010, 03:11 AM

Originally Posted by Screamer

Thanks Guys

Mudgey, Johnmark
I use Tygon 15,9/9,5mm. It's very flexible and can be really tight cambered. It's the best tube which I had.

Regarding Bitspower swivels I had only one bad unit but it was the old version (cube)

Systemlord
I have two radiators: 480 in "basement" and 240 in 5,25" bays. At the bottom except 480 will fit another 240 radiator, but will be no place for HDD.

Sweet Screamer! That's how I want to do my TJ07, one 480 + one 240 in bottom single loop. Wish I could do two 480s and mount the power supply externally, but cables might not be long enough.

-Systemlord

**neonatas** · 10-23-2010, 04:32 AM

Time to show mine

**Barr3l Rid3r** · 10-23-2010, 07:17 AM

Originally Posted by bobruto

@Barr3l Rid3r

How hot does your chipset run with these clocks and voltages?
My guess is you should be able to melt lead on it, cause mine is pretty hot on a 790X with just a slow side fan blowing at it and far humbler clocks/voltages

my chipset runs very cool always, it never goes more than 47C

But My VRM is a bit Hot, it can reach 68C while runnig prime.

**kier** · 10-23-2010, 07:53 AM

Almost finished, just a few more adjustments

**ScottALot** · 10-23-2010, 09:45 AM

2nd pic... is that a tiny bit of liquid in the block? May be a dumb question/observation, but why isn't it completely full/empty?

**88EVGAFTW** · 10-23-2010, 10:00 AM

What's up XS. Just added the second card to the loop with the same block as the above one. EK plexi+nickel

**kier** · 10-23-2010, 10:31 AM

Originally Posted by ScottALot

2nd pic... is that a tiny bit of liquid in the block? May be a dumb question/observation, but why isn't it completely full/empty?

was testing, still in progress

**Feizy** · 10-23-2010, 10:44 AM

Man, I love that black and white type color scheme 88EVGAFTW. Good build.

**ScottALot** · 10-23-2010, 03:13 PM

88EVGAFTW, on the pump, where does the pump out line go? I've been trying to figure out what to do with the same pump/res combo but with a HAF 932.

**Feizy** · 10-24-2010, 10:06 AM

Originally Posted by ScottALot

88EVGAFTW, on the pump, where does the pump out line go? I've been trying to figure out what to do with the same pump/res combo but with a HAF 932.

Looking at the pics he posted, it goes back behind the HDD cage, up the back and then to the radiator.

Thread: Liquid Cooling Case Gallery

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions