i wayt of my last bitspower parts , its no problem ..
Asus Rampage III Extreme - i7980 @ 4400mhz - GTX 480 - Corsair Dominator 12GB - 240GB OCZ Revodrive - Corsair 800D - Corsair AX850- Cooled by H2o
@oXcoRe : wOw!! triple pumps
Wow triple d5's.. 1 loop ?
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
well here is my first water loop ever on my old trusty q9400..
its pretty ugly after what i've seen here but im not rich and its my first time !
this wc loop costed me 450$ total.
well received installed and tested my for leak , now my system is up and running ambiant temp: 31 , CPU: 41 GPU: 28
Load temp CPU:50 GPU:48
i am using the CM Sniper and i wanted to use the top for my rad and keep the 200mm fan , to do this i ad to do some modification, i made 2 hole and i ad to cut the plastic from the top to make it fit, that was the hardest part of the job , after GPU.... WOW EK information are pretty much non existent and it look that it as been made by a chimp
Installed system working order
Last edited by sy5tem2; 04-25-2011 at 07:17 AM. Reason: image limit
Around $600 just on pumps, seems like you ended up spending more on watercooling parts then you did on actual hardware
Simple mistake, I never read his specs under the pics I just assumed because its beyond me why he's not even running sli! Trust me though, bitspower goodies add up $$$
& you would think watercooling is just for the bling factor on top of good hardware, but there are plenty of people who really cheap out on their watercooling parts because they can barely afford it. Don't ask me why they bother...
significant update to build: 'That's no Moon'...see sig
mountainmods ascension, so wire management a struggle, but coming along
MM Ascension
Intel 920 currently at 4.515 24/7
EVGA classified
Palit 580 GTX 3GB (x2 SLI)
Corsair 1866 GT 6 GB
Corsair AX1200
Auzentech Forte 7.1
HP ZR30w (x3)
DDC 3.25 (x2)
XSPC acrylic top
XSPC acrylic res. top
XSPC RX360 (x3)
XSPC RX120
EK supreme HF nickel CU
EK FB plexi Nickel-Plexi waterblock
EK non-ref. Nickel-Plexi for GTX 580
MIPS ramfreezer 6 for Corsair
That's no Moon Build:http://www.xtremesystems.org/forums/...d.php?t=249956
@mwlhrh
Love your MM Ascension. Im getting a MM Ascension case this summer. Gonna use ur build for cable management help!
EVGA X58 3x-SLI Classified [with EK Full cover block]
Sapphire Radeon 5870 [with EK-FC5870]
Corsair Dominator 1600Mhz (3x2GB)
Corsair HX 1000W
Intel I-7 920 with [EK- HF Supreme]
2x 250Gb Seagate Barracudas
XSPC RX360 Raidator
XSPC Single bay reservoir
6x Scythe Gentle typhoon 1850s.
1/2" ID, 3/4" OD Tygon tubing.
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
^ This. I remember NaeKuh having similar problems .
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
new GPU RL, new tube and new coolant!
New project in development!!
A small request ... please keep chat to a minimum. We're getting back to more comments and fewer pics. Feel free to use the PM system to ask questions.
Last edited by destinyair; 04-29-2011 at 07:04 AM.
@destinyair, I see well over 4 picturesFour Simple Rules:
1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
3) Do not quote images,
4) Finished cases only, no worklogs.
Optionally, it would be nice if you could list your water cooling components.
No need for apologies, just fixing
Anyway, unique PSU you have there
Few changes
See more:
http://www.xtremesystems.org/forums/...20#post4832920
Bookmarks