+ Reply to Thread
Results 1 to 17 of 17

Thread: 8k3a vs KX7 a test

  1. #1
    Xtreme Member SKATAN's Avatar
    Join Date
    Jun 2002
    Posts
    335
    Thanks
    0
    Thanked 0 Times in 0 Posts

    8k3a vs KX7 a test

    can anyone post a bench done on abit kx7 with a ti4200 clocked 300/600 so then ill post a score done on my 8k3a to compare both

    settings


    cpu and fsb 166x11 - 1833mhz

    win2k sp3

    rivatuner lodbias set to 4 ,vsync off ,prerender 3 ,textures force level 0 ,disable fog table emulation, and disable antialiasing


    and don´t touch anything else

    about performance


    tweak the bios and wpcredit as much as you can


    dont pause between tests

    thankz in advance


    ps:someone can always try to beat my 3dmark score with the same clocks on a kx7
    Last edited by SKATAN; 08-11-2002 at 01:25 PM.
    Barton mobile 2500+@2500mhz (slk900U) 11,5x218 2/2/3/11 1gb (2.96v) 256mb infineon 2700 c2.5 + 256mb corsair 3200 c2.5+ 512mb patriot 3500 c2 (salada total na 8RDA completamente alterada )
    ATI 9500 + artic-cooling vga silencier + rivatuner patchscript = ATI 9800PRO (xt clocks coming soon)
    resumindo é a chulice TOTAL :x2:

  2. #2
    Xtreme Legend MrIcee's Avatar
    Join Date
    Jun 2002
    Location
    Cambridge, NY
    Posts
    1,931
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Give me a couple hours and will do Skatan

    Randi

    Whoops..just noticed you said Ti4200..I don't have that card...could a Ti4600 substitute at those Mhz speeds??

  3. #3
    Xtreme Member shadco's Avatar
    Join Date
    Jul 2002
    Location
    Maryland
    Posts
    408
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Oh well I ran it anyway so here goes.

    Abit AT7 still an Abit kt333.

    XP not win2k.

    Visiontek TI4400 300/600 Riva tweaks as requested

    166x11

    Ram

    11884

    I know it's not what you asked for but the KX7 is tied up and it has XP also.

    Yeah and the Nature score sux as usual.

    Oh here's a KX7 Score

    Shad
    I knew where I was when I wrote this...
    I don't know where I am now.

    GB P35-DS3R q6600@3.15 Kubuntu Linux
    Asus P5B-DLX q6600@3.0 Ubuntu Linux
    GB 965-DS3 e6420@3.2 Gentoo Linux
    Asus Commando e6420@3.2/1950XTX Winders/VMWare/Kubuntu
    MSI Neo2 Plat Opty170@2.8 Debian Linux times 2
    IMac 2ghz c2d OSX 10.4
    Xeon Dualie 3.2Ghz Ubuntu 6.10 times 2

  4. #4
    Xtreme Legend MrIcee's Avatar
    Join Date
    Jun 2002
    Location
    Cambridge, NY
    Posts
    1,931
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I just blew a 12,469 with the specified settings, but Ti4600 clocked at the required matching speeds. I don't have a nic installed so will post up my score with a link in a bit

    SKATAN...what are we shooting for here in comparison to your 8K3A+?? Post up a score so we can compare or link here so we can compare notes

    Randi

    PS: Shadco...I'm showing 26xx/25xx in Sandra.

  5. #5
    Xtreme Member shadco's Avatar
    Join Date
    Jul 2002
    Location
    Maryland
    Posts
    408
    Thanks
    0
    Thanked 0 Times in 0 Posts
    PS: Shadco...I'm showing 26xx/25xx in Sandra.
    You running fast, or ultra command decode?

    Shad
    I knew where I was when I wrote this...
    I don't know where I am now.

    GB P35-DS3R q6600@3.15 Kubuntu Linux
    Asus P5B-DLX q6600@3.0 Ubuntu Linux
    GB 965-DS3 e6420@3.2 Gentoo Linux
    Asus Commando e6420@3.2/1950XTX Winders/VMWare/Kubuntu
    MSI Neo2 Plat Opty170@2.8 Debian Linux times 2
    IMac 2ghz c2d OSX 10.4
    Xeon Dualie 3.2Ghz Ubuntu 6.10 times 2

  6. #6
    Xtreme Legend MrIcee's Avatar
    Join Date
    Jun 2002
    Location
    Cambridge, NY
    Posts
    1,931
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Ultra baby

    Gotta use what the KX7 offers..right?? Can't help that Epox didn't include it

    Randi

  7. #7
    Xtreme Member shadco's Avatar
    Join Date
    Jul 2002
    Location
    Maryland
    Posts
    408
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Interesting Ultra made no difference on the AT7.

    Are you using the 9K bios or 7M?

    I'm using the 9K equivalent on the AT7.

    It's a :banana::banana::banana::banana::banana: when these Abit users hijack your thread isn't it?

    Shad
    I knew where I was when I wrote this...
    I don't know where I am now.

    GB P35-DS3R q6600@3.15 Kubuntu Linux
    Asus P5B-DLX q6600@3.0 Ubuntu Linux
    GB 965-DS3 e6420@3.2 Gentoo Linux
    Asus Commando e6420@3.2/1950XTX Winders/VMWare/Kubuntu
    MSI Neo2 Plat Opty170@2.8 Debian Linux times 2
    IMac 2ghz c2d OSX 10.4
    Xeon Dualie 3.2Ghz Ubuntu 6.10 times 2

  8. #8
    Xtreme Legend MrIcee's Avatar
    Join Date
    Jun 2002
    Location
    Cambridge, NY
    Posts
    1,931
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Using the 9K bios

    I just switched my drivers back to the 29.40's from 29.60's that I had been playing with...got a big boost along with disabling L2 ECC checking ...I'll be uploading the score right now and post it in a few

    Randi

  9. #9
    Xtreme Member spaceboy's Avatar
    Join Date
    Jun 2002
    Posts
    337
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Originally posted by MrIcee

    PS: Shadco...I'm showing 26xx/25xx in Sandra.

    the best i can get of my Gw is 305/575..

    Randi.. i'm waiting for these killer scores at 166x11
    and ... how to do it

  10. #10
    Xtreme Member SKATAN's Avatar
    Join Date
    Jun 2002
    Posts
    335
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thankz guys for posting your scores

    mrIcee you make that kx7 fly
    ehehe but I also make my 8k3a fly



    ok guys heres my score


    http://service.madonion.com/compare?2k1=4180743 12254mrks

    everything done as stated no OS tweaks just the rivatuner and then performance tweaks (bios & wpcredit)



    does anyone else have a ti4200 and kx7 that can bench ??



    I think that the ti4600 advantage of having 128mbs of ram is giving those 200mrks (less stress on AGP)

    (i know that in the "old days" 32m gts would lose 100mrks vs 64m gts)


    my t4200 gpu is so crappy locked me two times at 300 in drago high , but managed to get through the third try


    sandra (open browser and other stuff)

    2530
    2410




    --------------------------------------------------------


    Mricee
    what is the limit on the kx7 for ultra /fast and normal fsb speaking ?

    --------------------------------------------------------

    shadco

    are you using 128 agp aperture size?????????
    Last edited by SKATAN; 08-12-2002 at 05:16 AM.
    Barton mobile 2500+@2500mhz (slk900U) 11,5x218 2/2/3/11 1gb (2.96v) 256mb infineon 2700 c2.5 + 256mb corsair 3200 c2.5+ 512mb patriot 3500 c2 (salada total na 8RDA completamente alterada )
    ATI 9500 + artic-cooling vga silencier + rivatuner patchscript = ATI 9800PRO (xt clocks coming soon)
    resumindo é a chulice TOTAL :x2:

  11. #11
    Xtreme Member spaceboy's Avatar
    Join Date
    Jun 2002
    Posts
    337
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i can only bench at 300/570 if you want!
    i'm now setting up the system after the mods on the KX7

  12. #12
    Xtreme Member shadco's Avatar
    Join Date
    Jul 2002
    Location
    Maryland
    Posts
    408
    Thanks
    0
    Thanked 0 Times in 0 Posts
    shadco
    are you using 128 agp aperture size?????????
    Yes but that is the Kiddies system that has an XP build that has been through a ECS K75SA, a Soyo Dragon plus, an Asus A7V333, and now an Abit AT7 so it is by now means anywgere near optimal for benching.

    I may be able to get the KX7 fired up today but it looks like you already have your answer and it has a 4400 anyway.

    Shad
    I knew where I was when I wrote this...
    I don't know where I am now.

    GB P35-DS3R q6600@3.15 Kubuntu Linux
    Asus P5B-DLX q6600@3.0 Ubuntu Linux
    GB 965-DS3 e6420@3.2 Gentoo Linux
    Asus Commando e6420@3.2/1950XTX Winders/VMWare/Kubuntu
    MSI Neo2 Plat Opty170@2.8 Debian Linux times 2
    IMac 2ghz c2d OSX 10.4
    Xeon Dualie 3.2Ghz Ubuntu 6.10 times 2

  13. #13
    Xtreme Member SKATAN's Avatar
    Join Date
    Jun 2002
    Posts
    335
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Originally posted by spaceboy
    i can only bench at 300/570 if you want!
    i'm now setting up the system after the mods on the KX7
    yes please

    tweak the performance as much as you can

    ultra cpu comand wpcredit etc
    Barton mobile 2500+@2500mhz (slk900U) 11,5x218 2/2/3/11 1gb (2.96v) 256mb infineon 2700 c2.5 + 256mb corsair 3200 c2.5+ 512mb patriot 3500 c2 (salada total na 8RDA completamente alterada )
    ATI 9500 + artic-cooling vga silencier + rivatuner patchscript = ATI 9800PRO (xt clocks coming soon)
    resumindo é a chulice TOTAL :x2:

  14. #14
    Xtreme Legend MrIcee's Avatar
    Join Date
    Jun 2002
    Location
    Cambridge, NY
    Posts
    1,931
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Here you go guys...finally found time to get this uploaded for you.

    All parameters set as defined by Skatan..except for the fact I'm using the Ti4600 set to his clocks. I acknowledge that there may be a performance difference due to the additional ram on the card

    Only other difference is I switched drivers from my first bench...back to the 29.40's...still haven't found another faster on my system...29.60's didn't cut it. Heres the final tally


    12,640


    And Skatan my friend...you indeed know how to make the 8K3A+ bench like a wildfire

    Randi

    PS: Skatan..as far as Ultra....I can use it up to about 180-182Mhz...fast from there up thru about 210Mhz. Noermal from there thru 225Mhz withmy Sammy of course. Not sure yet where the Corsair XMS PC3200C2 will go until I finish burning it in.
    Last edited by MrIcee; 08-12-2002 at 05:09 PM.

  15. #15
    Xtreme Member SKATAN's Avatar
    Join Date
    Jun 2002
    Posts
    335
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thankz Mricee




    400mrks

    to raise 400mrks I need +10~ of fsb and +100~ of cpu


    you changed from 29.60 to 29.40 and disabled l2 ecc checking and raised 200 more marks?

    thats amazing , and i need 34mrks to go 13k


    I think ill try those 29.40 they seem amazing

    the new 2812 bios and check if the L2 ECC error correction is enabled or disabled

    you never know




    anyone with a ti4200 and a kx7 that can do the test
    Last edited by SKATAN; 08-13-2002 at 05:30 AM.
    Barton mobile 2500+@2500mhz (slk900U) 11,5x218 2/2/3/11 1gb (2.96v) 256mb infineon 2700 c2.5 + 256mb corsair 3200 c2.5+ 512mb patriot 3500 c2 (salada total na 8RDA completamente alterada )
    ATI 9500 + artic-cooling vga silencier + rivatuner patchscript = ATI 9800PRO (xt clocks coming soon)
    resumindo é a chulice TOTAL :x2:

  16. #16
    Xtreme Member SKATAN's Avatar
    Join Date
    Jun 2002
    Posts
    335
    Thanks
    0
    Thanked 0 Times in 0 Posts
    my win2k died two days ago because of wpcredit testing

    so after a fresh install new bios 2812+ wpcredit and 29.40

    12439


    before win2k died I also did this test

    29.60 L2 Ecc correction enabled

    29.40 L2 Ecc correction disabled

    i double checked

    weird hum?

    I probably did something wrong or the 8k3a really sucks
    Last edited by SKATAN; 08-15-2002 at 04:05 AM.
    Barton mobile 2500+@2500mhz (slk900U) 11,5x218 2/2/3/11 1gb (2.96v) 256mb infineon 2700 c2.5 + 256mb corsair 3200 c2.5+ 512mb patriot 3500 c2 (salada total na 8RDA completamente alterada )
    ATI 9500 + artic-cooling vga silencier + rivatuner patchscript = ATI 9800PRO (xt clocks coming soon)
    resumindo é a chulice TOTAL :x2:

  17. #17
    Xtreme Legend MrIcee's Avatar
    Join Date
    Jun 2002
    Location
    Cambridge, NY
    Posts
    1,931
    Thanks
    0
    Thanked 0 Times in 0 Posts
    When I disabled L2 ECC correction on the KX7....my FPS scores in car and Lobby soared...from low 20o's to 215 in car low at 1695Mhz 8.5x199Mhz FSb. There was a substantial difference that I had not really realized previously on this board. I accidently had the ECC checking enabled as I had cleared the cmos previously and inadvertantly didn't set its parameter. As far as the 8K3A+...I loved the board but felt like it was being held back by reigns in 3DMark benching. Even when I had the bandwidth up to par...it still lacked in the FPS games car and lobby...closer in score Dragon and nature.

    Randi
    Last edited by MrIcee; 08-15-2002 at 04:20 AM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts