Overclocking Failing at Resume from sleep

[Kurz]

The title say it all, though the problem is intermittent usually 30% probability of happening.
Its been going on 1-2 months. This started after overclocking from 2.8 to 2.95.

I am running a 6550 Core 2 Duo Clocked to 2.95 using 1.15 volts
Cpu is Prime stable for more than an Hour.

DDR2 2 gigs running in Dual Channel at 2.0 volts at 1009~Mhz
Timings are still stock.
Spread Spectrum for both CPU and Ram have been disabled.
All power saving options have been disabled.

Running a Maximus Formula Motherboard.
Also Running Windows 7 RC verison.
I have been folding fine on this computer.

I am scratching my head to see why its happening.
Since I am stable while booted.

[chew*]

Probably get answers to this question if you posted this in the correct section.

[Leeghoofd]

Did you try a newer bios ? The OC is fine if you can fold without a hickup, best is to drop in the maximus thread mate and post ya question there... there have been some known issues with this board and S3 when running OC's ( in fact a lot of boards are plagued by it )

[Kurz]

Just updated the bios.
So far I went through 5 S3 cycles no problems yet all with the same settings.
I'll report back.

[Leeghoofd]

Fingers crossed then

[Kurz]

Its official it works like a Charm.
The system seems a bit more... stable when it comes to clocks.
I've been playing with the FSB and Voltages.
It seems like I can get higher Clocks with less Volt.

Thanks again Lee.

[Leeghoofd]

Toppie, glad you got it working now