H20 | Phenom II 955/965 | Help

[64NOMIS]

Simon says Simon needs help.

1. Rig photo with monitor in shot at point indicated below (H20)
2. Screenshot: Prime95 Blend 30mins; @ 30Mins; with bench running, take a screenshot: CPUz memory & CPU; AMD Overdrive Photo with current CPU Status Open; Radiator Fan Speed Indicator
3. Screenshot: End bench. Wait. Same @ idle
4. Notes on H20 solution and any metered temps

OR

1. Rig photo with monitor in shot at point indicated below (Cold Air)
2. Screenshot: Prime95 Blend 30mins; @ 30Mins; with bench running, take a screenshot: CPUz memory & CPU; AMD Overdrive Photo with current CPU Status Open; CPU Fan Speed Indicator
3. Screenshot: End bench. Wait. Same @ idle
4. Notes on air solution and any metered temps

Would like to see solutions with high RPM radiator fan speeds.

Random Piece of AMD kit will be sent to 3 of the most helpful posts.

[charged3800z24]

Simon says Simon needs help.

1. Rig photo with monitor in shot at point indicated below (H20)
2. Screenshot: Prime95 30mins; @ 30Mins; with bench running, take a screenshot: CPUz memory & CPU; AMD Overdrive Photo with current CPU Status Open; Radiator Fan Speed Indicator
3. Screenshot: End bench. Wait. Same @ idle
4. Notes on H20 solution and any metered temps

OR

1. Rig photo with monitor in shot at point indicated below (Cold Air)
2. Screenshot: Prime95 30mins; @ 30Mins; with bench running, take a screenshot: CPUz memory & CPU; AMD Overdrive Photo with current CPU Status Open; CPU Fan Speed Indicator
3. Screenshot: End bench. Wait. Same @ idle
4. Notes on air solution and any metered temps

Would like to see solutions with high RPM radiator fan speeds.

Random Piece of AMD kit will be sent to 3 of the most helpful posts.

I am confused LOL.. Maybe because it is 2:30am here.... do you have an example?

[Titan7171]

I also didnt understand but didnt want to post first

I think we have to do the stuff he says and its supposed to help someone somehow...

Do I win something for explaining what to do?? because it helping someone

[Daveburt714]

64NOMIS: I know I don't quite meet you requirements, I'm running an unlocked X2/550, but I thought I'd try and throw some info your way, hopefully it will help...

Here's a shot of my whole rig:


Close up of Ghetto WC, theres a Swiftec Triple behind the 86 Chevette heater core... Fans are Scythe Ultras ran at max... :



30 Minutes of P95 w/CPU-z shots:




Heres a shot of the actual board, GBT 790XT-UD4P:




After 10 minutes of cooldown (starting water temp was ~23c, close to the same after 10 minutes...):

The Fan speed is actually the speed of the Antec PWM cooler...



Water temps were 23c before I started the tests. I had been testing my new naked Ram (great 2x2 kit for $70 BTW, you can see them in the pic.. ) So it wasn't that tough to add a few SS's...

I know I didn't quite meet your requirements, but I tried... If your really gonna give away free stuff I could really use a video card...

[wuttz]

AMBIENT TEMPS: 76f (24.4c)
FANS USED: Noctua NF-P12 1300RPM +/- 10%, 54.3CFM(92.3m^3/h) 19.8dBA [PUSH PULL SETUP], Plugged directly to +12v, no fan speed controls. 1300RPM speeds rated on fans.
CPU COOLER: Prolimatech Megahalem


Test Performed: PRIME 95 BLEND/ 30 MINUTES







Notes: Temps stabilized at minimum temperature(31.5c~33c, Cool N Quiet OFF) at +3 minutes after shutting down Prime95 BLEND. Frequency deviation was +/- 2MHz during test. Maximum temps seen 47C during test.







Thank you. Should you need more information please don't hesitate to contact me.

[FlanK3r]

daveburt:finally i see your system (nice workstation)

[wuttz]

I pushed my uATX ECS A785GM-M a little bit more. Squealing pwm/caps at 1.4v vcore. =( I didn't want to bust it so I'll settle for this.
Also, their BIOS is unfinished, with the manual overclocking options not working(BIOS reboot after f10 save will hang when it is enabled).
So all I could do was a reference clock push +20MHz at BIOS. everything else k10stat/amd overdrive.

Notes: Highest temps seen this time was 54.5c, with 54c being average. Idle temps of 34.5c were achieved again +3 minutes after Prime 95 Blend test termination.

Again,

AMBIENT TEMPS: 76f (24.4c)
FANS USED: Noctua NF-P12 1300RPM +/- 10%, 54.3CFM(92.3m^3/h) 19.8dBA [PUSH PULL SETUP], Plugged directly to +12v, no fan speed controls. 1300RPM speeds rated on fans.
CPU COOLER: Prolimatech Megahalem


Test Performed: PRIME 95 BLEND/ 30 MINUTES

Let's start.

[Zeus]

Here's my contribution to this thread:

Pics of the system






Ghetto temp gauge in the reservoir



Fan speed reading from my OC station, can't get a software reading as it's hardwired to the oc station fan controller



Full load-- Prime 95 Blend





Screen full load



Temps during Prime, above is watertemp, temp below is ambient



After letting it sit idle for 10 minutes



Screen after 10 minutes idle



Watercooling consists:

Heatkiller 3.0 LT cpu block
EK 4800 series FC vga block
Laing DDC 2+ waterpump
Thermochill PA 120.2 & PA 120.3 radiators with Yate Loon D12SL fans @ 1350 rpm
EK 200mm reservoir
Tygon R3400 10/13mm tubing

Hope it's good enough.

[64NOMIS]

Perfect way to start my day.

Daveburt714, that is an ugly rig. 550 is fine. Where's your radiator? In.

wutzz, fine air setup. Prefer cold air but you've set up a great reference result. In.

Zeus. This is not a clean car competition. In. Can you set your fan speed higher or is that max? Nice rig.

965's?

[Zeus]

Zeus. This is not a clean car competition. In. Can you set your fan speed higher or is that max? Nice rig.

965's?

Clean cars ftw!

Sorry, fans are maxed here. Still plenty of cooling power by looking at the ambient-watertemp delta i'd say.

No 965 here, send me one and i'll test it.

[FlanK3r]

Zeus:very nice system, clean, case etc...
Lol, u have trackball, not mouse?

[64NOMIS]

Clean cars ftw!

Sorry, fans are maxed here. Still plenty of cooling power by looking at the ambient-watertemp delta i'd say.

No 965 here, send me one and i'll test it.

OK. Putting in one extra Random Piece of Kit.

965 BE to Zeus. 3 Random Pieces of Kit still available.

[ridney]

okay here's mine, it's not a 955 but a 720

Description of rig:

CPU: Phenom II 720BE
Mobo: MSI 790FX-GD70
RAM: Kingston PC-10700 (1333MHz) CAS9
Video: 2 x ATI 4770

CPU and video cards watercooled (pardon my crappy old PnS)



Rig photo



(cracker nuts while waiting for 30mins)


Rig photo during prime95 blend test






Below is a screenshot of Prime95 blend test at 30 minutes together with cpu-z, hardware monitor and amd overdrive. Since I have

no external temperature gauge measuring ambients, i would just guesstimate it around 28c (Singapore is quite humid even in the

evening) and 24c with the AC on set at 21c. Temps at idle (3.9GHz core at 1.488v, 2.6GHz cpu-nb at 1.35v) were around 30c idle

and maxes out at 42c Prime Blend test. These temnps were all based from the cpuid hardware monitor.






Right after 30 mins i stopped Prime95 blend test, idled for about 2 minutes and took a screenshot (below). Idle temps got down

to 27c within just 2 minutes.






This is my watercooling setup.

CPU Water block: Enzotech Luna REV.A
GPU Water block: 2 x MCW60 Rev.2
Pump: MCP350 (Laing DDC 3.1) modded to 18w
Reservoir: XSPC DUal Bay DDC Res
Tubing: PrimoFlex LRT 3/8"ID 1/2"OD
Fittings: Bitspower compression fittings for 3/8"ID 1/2"ID tubings
Radiator: Feser Monsta 420/360 Xchanger
Fans: 5 x 140mm YateLoon Medium at 1400rpm, 1 x 120mm Lian Li fan at 1200rpm (3x140mm fans in push, 2x140mm + 1x120mm fans in

pull)


Hope this helps

[64NOMIS]

ridney. Perfect. I like 720's too. Don't let your chasis role off your desk. Clean car contender - but leaving nuts on the dash! In.

[ridney]

30 minutes is along wait , thanks

[Zeus]

Zeus:very nice system, clean, case etc...
Lol, u have trackball, not mouse?

Yup, i'm used to it and i love it.

I'm not a gamer you see.

OK. Putting in one extra Random Piece of Kit.

965 BE to Zeus. 3 Random Pieces of Kit still available.

Cool!!

[FlanK3r]

but u have good graphic for gaming , i change it for my second graphic (second x1950pro, for non gamers is ok )

[~CS~]

I have 2 120 CFM deltas i can smack on the Xig , but dont have PII only a Kuma , perhaps i should too get a Phenom II so i can provide some important data

[shadow_419]

Picture of my rig and fantastic dining room table, err desk.




30 min of Prime95





Picture about 7 min after stopping Prime 95




22C ambient room temps

Air cooling the x2 550 be / x4 b50 @ 3.4ghz :

Cooler Master Hyper 212 Plus w/ 2 Scythe S-Flex 120mm 1600rpm fans in push-pull
Lancool PC-K62 with stock fans [3 x 140mm 900rpm 1 x 120mm 1200rpm fans]

Hope it helps out.

[chew*]

Yup, i'm used to it and i love it.

I'm not a gamer you see.

I game with a trackball and get repeatedly kicked for suspected aimbot no proof no PB.....just suspicions.

My entire clan got banned one year, we showed up in QC in person rolled everyone, admins scanned our rigs for hacks we got unbanned......

The finger is far more precise than the entire hand

[FlanK3r]

hehe, lol

[RhoXeD]

i will post tonight with sig rig PhII's with pics if i can dig up the digital camera

[Buckeye]

ekk... saw this in the morning, breakfast and yard work now out of the way and getting the 965 setup back on the bench

[wuttz]

Perfect way to start my day.

wutzz, fine air setup. Prefer cold air but you've set up a great reference result. In.

thank you sir! but cold air very hard to come by with here in texas.. unless i use the ones in liquid form?



i can do -76c to simulate antarctic air, or -196c to simulate lunar conditions (-173c)

[Daveburt714]

Perfect way to start my day.

Daveburt714, that is an ugly rig. 550 is fine. Where's your radiator? In.

Ugly?... Well after seeing Zeus's rig I guess it is....

I keep meaning to clean things up, but I just can't seem to quit modding
stuff long enoough to make it pretty...
Sooner or later I'll clean it up, at leasst it runs strong.

Theres a Swiftec Tripple behind the box and an 87 Chevette heater core in front, believe it or not I AM going to redo the external WC box. I already have the plans in my head and it includes and Ice box...

L8r...... Dave