ClockGen for NF2
I don't know if you all have seen but ClockGen for NF2 among others is up.
It seems that the PCI speeds and AGP speed are connected in some way. As you increase AGP the PCI values also go up. If the values are correctly displayed that is...
ClockGen Download Page
Take a look
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
Yea it's good.
But this & this, makes for a good combination
That's wild!
If only the 8rdavcore worked on the Abit NF2?
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
O it does.
http://www.hasw.net/nf7vcore/
& epox people who don't know about it here > http://www.hasw.net/8rdavcore/
Last edited by Drisler; 11-26-2003 at 06:34 PM.
Man that's excellent, thanks. I'll down load it asap...Originally posted by Drisler
O it does.
http://www.hasw.net/nf7vcore/
& epox people who don't know about it here > http://www.hasw.net/8rdavcore/
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
Lemme know if the changing the FSB works with it.
It's greyed out on epox boards..so i just use the nv utility.. if he fixes that it'll be perfect.
And with the 8rdavcore, i can use 1.87v & higher without cutting that pin on the vreg. Much thanks to hasw
Last edited by Drisler; 11-26-2003 at 07:06 PM.
Yep fsb adjustment appears to be working on the nf7vcore utility! I went down a couple mhz then went up and unfortunately experienced a freeze. But I had Clockgen for NF2 open as well. So there may have been a conflict there.
Also vcore seems to work. AGP volts is greyed out. I didn't change the Vdd nor the Dimm as a test out.
It's amazing now that nVidia has made the info available how much easier things are. All these things should have been available all along.... Oh well.
Last edited by LORD; 11-26-2003 at 09:23 PM.
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
dude you just saved me 1-2 million reboots! woohooo!
nothing so far ive found could do all this in one utility.
nice
Alright Brain, you don't like me, and I don't like you. But lets just do this, and I can get back to killing you with beer. -HJS-[/color][/size]
HEATWARE
Drisler thanks for the linkyage!!!
you shoudl check out the AN7's stuff, the ocGuru allows for full voltage control and speeds of everything, as well as NB and CPU fan speed control!!!!!
Dell Studio XPS16... no desktop
yes i have AIM, yes you can send me a message. EvilSpork3 i dare you.
the 8rda version has been around for long while now.. but it was in Command Line, not GUIOriginally posted by LORD
It's amazing now that nVidia has made the info available how much easier things are. All these things should have been available all along.... Oh well.
Cool...
I will try it out when I get home
If I could change voltages from win I definately would be veryvery happy
Xtremesystems.org
i7-950 * ryba 2-stager + 1-stager * EVGA X58 Classified E759 * 6Gig Corsair DomGT 2000C7 * XFX GTX 285 XXX * Corsair F60 * Corsair HX1000 * DT Easy V2.5 * Swiftech MCW60, MCP355 Dual Setup@Watercool Top, PA120.3, EK Res250, DD 16/10.
C2D E8400 wc/HK3.0 * ASUS P5E64 WS Evo * 2-3GB OCZ Gold/Platinum DDR3 * X1950XTX wc/EK * Intel 80Gig G2 * EK 150 Res + Swiftech MCP350 + Alphacool 360 + 120 slim w/Enermax Cluster * Corsair VX550 * LL A17A
Hate to pop everyones bubble...
This program his given both me and my mate a lot of trouble fortunatly i've come off better than him.
From the second i changed the vcore in this program, my PC froze requiring a CMOS reset to get it back up again. Unfortunatly my mates mobo appears to be dead from using this piece of software, mobo will not post/beep after anything.
A word of caution...
What motherboards were those?Originally posted by Cucumber
Hate to pop everyones bubble...
This program his given both me and my mate a lot of trouble fortunatly i've come off better than him.
From the second i changed the vcore in this program, my PC froze requiring a CMOS reset to get it back up again. Unfortunatly my mates mobo appears to be dead from using this piece of software, mobo will not post/beep after anything.
A word of caution...
Both NF7-S v2.0
Were those changes made above the 1.85v mentioned in the readme?
GA-P35-DS3L no more than 450fsb w/1333 chip
E6550 stuck at 3150
V-DATA 2x1gb
MSI 7900GS 512 3Dmark score in near future
Old A64 scores2001 39,707 3D03 23,768 3D05 11,394 3D06 5914
Yes .... *reads readme*
EDIT* Seems i got away lucky, we both did that
Last edited by Cucumber; 11-27-2003 at 04:13 PM.
Sorry to hear of the unfortunate incident.Originally posted by Cucumber
Hate to pop everyones bubble...
This program his given both me and my mate a lot of trouble fortunatly i've come off better than him.
From the second i changed the vcore in this program, my PC froze requiring a CMOS reset to get it back up again. Unfortunatly my mates mobo appears to be dead from using this piece of software, mobo will not post/beep after anything.
A word of caution...
I used .2Beta and there didn't appear to be a problem. Hmm strange....
Actually there is apparently version .3 available now as well.
Drisler,
I heard a while back about this proggy as well but didn't investigate further due to bypassing the 8rda saga all together.
EDIT: I just checked it's up to 0.7Beta now....
Last edited by LORD; 11-27-2003 at 05:26 PM.
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
I've been looking for a ClockGen for my Abit NF7-S mobo. I am a little lazing when it comes to adjusting thing in the BIOS. I see that you haven't had any problems. Is there anything special you had to do with the program or did everything just work perfectly for ya ?
In here, we gotta push it. That's our jobs.
If you were referring to me. Then the ClockGen appears to work satisfactorily. As far as I have seen so far.Originally posted by Brian
I've been looking for a ClockGen for my Abit NF7-S mobo. I am a little lazing when it comes to adjusting thing in the BIOS. I see that you haven't had any problems. Is there anything special you had to do with the program or did everything just work perfectly for ya ?
It only has fsb and AGP setting adjustment. Which cut's down on user inflicted problems some what....
Also the settings you see on the first post are basically what the system runs at 24/7.
LORD
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
this is the best thing that happen to amd since dual channel memory!
my cs server:
amd xp 2600
abit nf7s v2 with vmods
ati radeon 9800 xt
hyper x pc3500 2x256
ttgi 520 psupply
eheim 315 gph pump
dangerden nbridge&GPU block
x-flow (modded) cpu block
lian li pc75(black)
running stable every day use at 2446@10.5*232
Yes it's all good..Originally posted by thetruememphis
this is the best thing that happen to amd since dual channel memory!
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
Posting Permissions
Reply With Quote
