2500k batch number results? new build

[railmeat]

picked this up at micrcoenter today $190 out the door ---2500k batch # L041b716


googled and found 2 decent results.....did i get a one recongnized as good...anyone here?

----------------------------------------------------

also new ram,mobo and heatsink here WED...cant wait for the swap.


new mobo-
BIOSTAR TP67XE (B3) LGA 1155 Intel P67
http://www.newegg.com/Product/Produc...82E16813138317

----------------------

mobo review(good quik review,props!)
http://www.xtremesystems.org/forums/...r-TP67XE/page1

--------------------
new ram-
G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133
http://www.newegg.com/Product/Produc...82E16820231468

---------------------------------
new watererblock heatkiller rev 3.0 replacing gtz block
http://www.performance-pcs.com/catal...a80c239a233be5

---------------------------------------------

water direction in my loop-

pump out to rad#1 then out to cpu in then cpu out to card inlet then card outlet to res to pump inlet then pump out to rad#2..............thoughts.

--------------------------------------------------




my water-
(2) 3x120mm rads........ 1 xpsc(2in thk)-1swiftech(1in thk),swiftech p655,1/2in tygon,evga hydro gtx 590(temps 28-30,in game 44max) with the heatkiller 3 on my new 2500k.single loop.


thoughts?on batch number on the 2500k plz...

[LagunaX]

Why are you covering the serial number?
The answer to your question lies in the last 2 digits there.
I'd say 1-20 or 80-00 your chances are pretty good.

[railmeat]

Why are you covering the serial number?
The answer to your question lies in the last 2 digits there.
I'd say 1-20 or 80-00 your chances are pretty good.

o sorry was putting my name on my box for pic,lol



hows this lookin =) ?

[LagunaX]

[railmeat]

so im looking 4.5-5ghz stable 24/7 under my water ehh im assuming?

the ram and mobo are good i have comin wed
BIOSTAR TP67XE (B3) LGA 1155 Intel P67
http://www.newegg.com/Product/Produc...82E16813138317

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133
http://www.newegg.com/Product/Produc...82E16820231468

heatkiller rev 3.0 replacing gtz block should help too =)
http://www.performance-pcs.com/catal...a80c239a233be5

[LagunaX]

http://www.xtremesystems.org/forums/...=1#post4826273

[LagunaX]

I picked up this 2500k from microcenter a month ago for a buddy of mine since he was getting one for the first time.
The lowest or highest I could get was 08.
It will boot at least 50 with PLL off and did not try for max multi (didn't really try much with this chip, he wanted a daily overclock chip).
It could do linX 20 pass 4.8ghz 1.31v but linX is a bunch of crock for stability - you would still get random ilde error code 124's.
However haven't seen an error code 124 after testing for stability with Prime95 (an hour at least) at 1.34v set in bios
i5-2500k3101A127.jpg
Bottom line is that it is weird how it used to be all about the batch but nowadays seems more like the serial number which I think relates to the location of the chip on the master wafer