Thanks for the compliments and info, I think the best I could muster with what I have is a 4xraid0 array, and a 5770 with an 8600GT as a physx gpu (but doubt PCM2005 would support physx). I'll think about giving that a whirl once I've done some backing up
Yeah, taking it very easy for a while on the CPU now, as you can probably see, 1.68v on H2O was waaay to much, I booted at 1.6v/4.9GHz, loaded setFSB and CPU-Z and turned down vcore to 1.575ish so it cooled enough while idling - during this, I cued all voltages to go for gold and I set 555fsb, then it was a case of clicking SET on ET6, then on setFSB, and working my way up from there. It never saw that much vcore for more than 30 seconds, but very risky!
One thing that bugged me was the HUGE voltage bump between 1.60 (read ~1.56 in CPU-Z), and 1.62 (read ~1.64) and 1.64 (read 1.68), if it wasn't for that .1v jump, I feel I might have been able to tune some higher speeds.
I was really chuffed with how my reapers performed throughout - some old sticks that have taken a beating over the years, but couldn't loosen timings without it being unbootable, it just didn't like looser timings.
Anyway, I'll be back with more results in due time - Kudos to you all
Bookmarks