Mr MTP - I'm not using turboV to overclock just to display what speed the machine booted at.
I was overclocking in the bios only.
After the fact - I did try to raise the mutli in turboV, no luck there either - I can raise the multi in TurboV but no change in the displayed cpu speed in cpuz or realtrmp.
Last edited by SteveRo; 01-30-2011 at 09:27 AM.
stevero had to 1 up me in am3 last night
anyways, updated result
http://www.hwbot.org/community/submi...0_413090_marks
Current Status - Testing & Research
Mr. ZenEffect - nice run! great chip you got there!Originally Posted by ZenEffect
stevero had to 1 up me in am3 last night
anyways, updated result
http://www.hwbot.org/community/submi...0_413090_marks
Also - everyone - I figured out the P8P67 problem I was having.
Apperantly there is a compatibility problem between the Asus P8P67 and the MTRON Mobi 3000 drive.
The Mobi SSD is IDE only so you need to change that in the bios to even boot but then when it does boot you only get the 34x multi, no higher.
I was able to confirm this by switching back and forth between the Mobi and a Crucial C300 - C300 let me get to 52x101.1=5258 under W7x64 with light 2d, pi and wprime32. This was the L040B705 chip.
I will now try my L042B208 chip in the Asus. On the UD5 I had this chip to 5315 for the easy 2D and pcm05.
Last edited by SteveRo; 01-30-2011 at 11:53 AM.
My solution wouldn't have helped since it was a hardware issue, so its good to hear you figuered it.
I take back what I said, I'm still broken.My solution wouldn't have helped since it was a hardware issue, so its good to hear you figuered it.
When I put my other chip in the machine - it would post but not boot, out of about 20 tries at all different settings I got one windows boot at 5g.
Even tried to install a new os at default settings but the machine would just blue screen at the end of loading windows from the usb.
I will take it back to microcenter this week.
Good luck with next chip!I take back what I said, I'm still broken.
When I put my other chip in the machine - it would post but not boot, out of about 20 tries at all different settings I got one windows boot at 5g.
Even tried to install a new os at default settings but the machine would just blue screen at the end of loading windows from the usb.
I will take it back to microcenter this week.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
SteveRo is already pushing his new GTX 580 to the limit, while chew* has found a nice Phenom II 955. He managed to hit 7200MHz+ on the C4E!
Third overclocker to enter the Phenom II 7.2GHz club as well!
G.Foyle is overclocking a GTX 465, taking home the gold cup in the 01 category!
zeneffect and Linuxfan, nice scores as well in Heaven and 3D Mark Vantage!
![](http://www.hwbot.org/signature/u15466.png height="110" )
holy crap look at all those points!
Mr. Steve thinks he can just pass me...
Well I gotta get up and do something about this.
Lately I've been dropping like a fly in the rankings now and Steve is ahead of me in globals!
Nice work you guys passing 450 points and nearing 500...
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Heh I got a few buns in the oven myself.
No chip that does more than 5 gig but lets see how much effec I can wring out of it
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Yes, my time in the light will be brief - this I know well!
Much thanks to all my mentors in this forum, my education continues.
guys I tried the FEB contest (stage 2) JUST FOR FUN and I got 18k points on modest clocks and vga.
this is 1 core enabled single vga. when submitting on hwbot I get a warning to use a driver that does not allow physx. can i disable it in nvidia panel or is this a special thing?
Last edited by trans am; 02-03-2011 at 04:23 PM.
Physx was on for that run, it's checked in GPU-z, that part of your issue.guys I tried the FEB contest (stage 2) JUST FOR FUN and I got 18k points on modest clocks and vga.
this is 1 core enabled single vga. when submitting on hwbot I get a warning to use a driver that does not allow physx. can i disable it in nvidia panel or is this a special thing?
That cpu score is not possible with 1 core 1 thread without physx.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Chew I know buddy. My question is how do I disable it so can get a legit submission?
Open nvidia control panel, top left there should be options for setting the all the graphics options and another for physx.
click the physx and it will go to another page, option enable GPU or disable CPU.
You want disable CPU then physx will run on CPU.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
I believe you can fix this by going into the options tab, look at Post Processing and check "Disable PPU", otherwise it's in Nvidia Control Panel.guys I tried the FEB contest (stage 2) JUST FOR FUN and I got 18k points on modest clocks and vga.
this is 1 core enabled single vga. when submitting on hwbot I get a warning to use a driver that does not allow physx. can i disable it in nvidia panel or is this a special thing?
Smile
no that not it both of you. I tried all that. the 1st run I submitted was phys cpu checked. then I ran it with gpu checked. final fix was going to control panel and removing nvidia physx driver and rebooting. lets lets see what happens.
buggy driver?
Smile
crap that work either. I ran it again after I removed phyx from control panel./programs. i had to remove the nvidia driver reinstall and go to advanced during install and uncheck phyx.
lets give it another go.
okay here we go. man what a difference physx makes. Massman. please add these instructions to any future benches that call for phyx being disabled. its goes like this...
assuming you are on nvidia and installed the driver by clicking a button at defaults you have physx installed.
the workaround is unistalling that nvidia driver suite and rebooting
reinstall using advanced settings and uncheck the box that enables physx driver.
reboot
then go into nvidia panel /physx settings and check cpu box.
thats it. and your score that you thought you had it made at 18k is actually this:
18k to 11k its amazing what phyx can do for a run but whats even more amazing is that i just learned this today.
a seven thousand point increase from something called physx. it makes you wonder on so many levels.
http://hwbot.org/competition/hoc_feb11?tab=stage%202
Last edited by trans am; 02-03-2011 at 05:39 PM.
I still dont understand the difference betwee HT being a feature and allowed and Phyx being software and is not allowed, but rules are rules.
It's really simple: HT works 100% in hardware and is the feature the same as multicore, 64-bit or SSE are features. HT works in every OS and for every software, regardless if it has been written with HT in mind (i.e. wprime or 3dm06). PhysX is 100% software (could be recompiled for ATI hardware if Nvidia allowed), is not vendor-agnostic, requires additional vendor locked libraries (PhysX runtime) and, most importantly, requires the software to be coded with PhysX in mind.
HT is a way of executing twice as many threads without having twice as many transistors. Bulldozer will have a different way of doing the same: add threads without adding transistors. It's the same for SSE, AVX, 64-bit extensions: they all add throughput without adding transistors.
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
Hwbot keeps going down when I want to submit results....
Its a conspiracy!
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Well in overall globals I am past Steve now.....
Still got a long way to go, he's been working hard and getting good results.
Tested one of my 580s today on LN2 and it was pretty horrible, as well as the 980x... More testing to come.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Guys I'm confused by this submission.
http://hwbot.org/community/submissio...80_35857_marks
Compare CPU score to this:
http://hwbot.org/community/submissio...80_32974_marks
Is there some trick to this?
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Posting Permissions
Reply With Quote
Bookmarks