Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Guys, just wanna share some info...You can request sample here...http://www.chomerics.com/products/Th...se_650_660.htm
T660 and 670 seem to be really good with cold
Last edited by Dumo; 08-20-2011 at 06:31 PM.
With AMD/LN2 non brittled....dunno the temp. since no cold bug and didn't use DT
No comparo with other tim..only used ceramique, T660 and zero therm all were ok.
Just try the free sample, they also have phase-change tim and thermal interface gap (a sheet which I tested with cold bugged cpu)
i put my user name as my company name. they sent it to my apartment via ups. got my sample of T670 today, will test under ln2 tomorrow.
Current Status - Testing & Research
I just use the bios temps.
what did I miss? new thermal paste? I just use ceramic or that newegg paste that comes in a nail polish bottle you brush on. Chew turned me onto it last year and its all I use now.
http://www.newegg.com/Product/Produc...82E16835200060
another tip he showed me when insulating take a few balls of eraser about the size of pea and hit the backside of the board where the dimms are. There are a few holes you just plug up. They might seem small but that paste and the eraser dimm plug trick changed my life. Also instead of keeping isopropyl around and keep buying just get yourself a huge tank of paint thinner. Chew had it laying around the kitchen and I thought it was a slight fire hazard but he didnt blink an eye. He told me I should have one around for removing conformal spray/insulation and thermal paste.
hi to the team.
its been a while. Are you guys focused on a particular contest this month? its the end of the month. Whats the word? are you dudes making submissions?
has anyone ever got the pot mounted and poured a slight amount of alcohol in the bottom of the pot and lit it on fire to prime the paste before adding ln2? I just thought of it. Seems like a safe way to prime the paste without having the board on and frying the cpu before you actually bench? Good idea or bad idea?
Last edited by trans am; 08-29-2011 at 04:18 PM.
honda its just the hurricane bs on the east coast hub. 10 bux it will say out for delivery tomorrow.
Yeah, but I'm not sure what to think about it, his Last Activity on XS was: 05-23-2011 09:46 PM.
Anyway, welcome to the team, Tom.
Some new RAM for the P5E? I bought some 2000C9 to play with recently ( and also some Mushkin 1066 and 1150 CL5 to keep me busy. )
Let me know what your 1800C7 can do.
Bookmarks