Good work andto the "back ups" posted.
Good work and
Just wait for George's back-up, he has played the game many times...
![](http://www.hwbot.org/signature/u15466.png height="110" )
Originally Posted by chew*
Still working at getting better @ the gameJust wait for George's back-up, he has played the game many times...
Ran R11.5 at the end of the session and was surprised at the results, will get a proper WR for R11.5 tomorrow when things dry once again.
Wanted to say thanks to Davis for the GTX 2's, they made this soooo much easier.
Last edited by l0ud_sil3nc3; 04-18-2014 at 03:35 PM.
Nice R11.5 score!Still working at getting better @ the game
Ran R11.5 at the end of the session and was surprised at the results, will get a proper WR for R11.5 tomorrow when things dry once again.
Wanted to say thanks to Davis for the GTX 2's, they made this soooo much easier.
Yay for the legendary GTX2!
Thanks Dan, on to more 771 gearNice R11.5 score!
Yay for the legendary GTX2!
cpu #2
What's the max validation on this one? Around 6.4 GHz?
PS: Happy Easter!
I didn't save oneWhat's the max validation on this one? Around 6.4 GHz?
PS: Happy Easter!
VID had me worried (1.27v) but it seemed to scale pretty well, and it had a -130c cb and -125c cbb, so all in a pretty fair cpu given the VID.
While moving found I still have my old P4P800SE and OCZ Booster. Saw these floating on eBay and decided to grab them. Anybody know if these are TCCD or the bad stuff that came afterwards?
Heatware
filmbot
F(l)uck XTU! I hope I never have to bench this setup again XD
Prep time > Run time
Relevant sauciness
Last edited by l0ud_sil3nc3; 04-20-2014 at 09:26 PM.
1.27V VID is pretty bad, but those chips can also be limited by FSB walls, so a bad VID chip can still be better than a chip with a promising VID as long as it has a higher FSB wall.I didn't save one
VID had me worried (1.27v) but it seemed to scale pretty well, and it had a -130c cb and -125c cbb, so all in a pretty fair cpu given the VID.
Do you have an Asus CT-479 adapter as well?
No idea what's the difference between version 1.0 and 1.1.
TCC5 binned for the same spec as TCCD shouldn't be a lot worse than TCCD though. Will you test the setup again?
You nailed it!
Last edited by Don_Dan; 04-20-2014 at 01:24 PM.
Worthless to the team, but I posted this last night:
http://hwbot.org/submission/2534582_
Not bad for 45nm...tried 1860 MHz but the phone crashed.
Smile
Not bad, you even received some global points!
Not anymore, sold off a lot of that platform years ago. P4C fully modded, think 730, special G Skill binned BH-5, CT-479 adapter (attempted Hipro mod, didn't go wellDo you have an Asus CT-479 adapter as well?
No idea what's difference between version 1.0 and 1.1.), full modded x850xt PE and modded full Cu Zalman. If I had means for sub zero, could have done some real damage.
Going to get an adapter for this platform and 771 adapter for my REX. Start doing some old school phase benching in the coming months.
Heatware
filmbot
Too bad, I saw an CT-479 on ebay.de today, but I was too slow at the end of the auction and it sold for 12,60€. Would've been nice to have it.
I remember the mods hipro did to his 479 setup, crazy stuff!
As far as I know X48 and the 771 mod don't play well together, that's why no one is using a REX for their tests. Try to find a cheap P35 or P45 board and don't risk killing your REX, they're too precious. Maybe George can chime in with more info, as he has done some testing with 771 chips.
What Dan saidToo bad, I saw an CT-479 on ebay.de today, but I was too slow at the end of the auction and it sold for 12,60?. Would've been nice to have it.
I remember the mods hipro did to his 479 setup, crazy stuff!
As far as I know X48 and the 771 mod don't play well together, that's why no one is using a REX for their tests. Try to find a cheap P35 or P45 board and don't risk killing your REX, they're too precious. Maybe George can chime in with more info, as he has done some testing with 771 chips.
Not a good idea to cut up a REX unless you plan to run a X33xx series Xeon and not the X54xx models. I have seen X48 chipsets work with 771 quads so it is possible, just search the 771-775 thread at OCN, I read like half of it the other day lol
Also be sure to update your bios with the correct microcode to "unleash the full POWAH!"
The real points will come from 3 core Phenom II submissions...Not bad, you even received some global points!
Good thing the summer is long.
Smile
Sounds like a good plan!
News at HWBOT: l0ud_sil3nc3 one-ups W1zerty and sets new 2xCPU XTU record with Core i3 4340 at 4070 Mhz
If you could run a 3 core setup that would be nice!
PS: Looks like it'll be hard to get to the second rank this year... Moderator Ranking 2014 - Current Standings
Could and would are two different things! XDIf you could run a 3 core setup that would be nice!
There are lots of 2x and 3x core global and team points to be had. I still have Daveburt714's 8 GHz FX-8120 as well. I hope to send it home with him including a nice hunk of machined copper but he wants me to hold onto it for now.
Smile
Sorry, you know I'm not a native English speaker!
Well, for 3x and 5x core AMD is the only way to go, but for 2x you need at least 3 different setups, none of which are AMD based. Clarkdale for WPrime ( and HWBOT Prime ), Wolfdale for HWBOT Prime and Westmere for Cinebench. More points could be had if you focused on 1x core with an AMD setup.
By the way, good to see you again.
#2 of 6
X58 32M warmup (cpu@LN2 / memory@air)
Any tips on getting high bclk on X58, I could not boot 250 even with slow mode.
Posted a wanted thread but may get more attention here, anybody have an old AOpen i975Xa-YDG laying around?
Heatware
filmbot
Posted a wanted thread but may get more attention here, anybody have an old AOpen i975Xa-YDG laying around?
Nothing on ebay?
Maybe try Linuxfan on here, he might have one.
NopeI'll shoot him a PM, thanks
Heatware
filmbot
Are all those chips L3014?
Congrats for taking back the 1x record!
What did you try so far? Is this Brian's old chip or a random chip? PCIe clock?
I saw it, but I'm afraid they're very rare nowadays. I've looked for it from time to time as well, but it seems impossible to find. Maybe you're better off trying to find another CT-479 adapter. Anyway, good luck!Posted a wanted thread but may get more attention here, anybody have an old AOpen i975Xa-YDG laying around?
Posting Permissions
Reply With Quote
Bookmarks