XS HWBot Team

[l0ud_sil3nc3]

Is this the first G3258 you've tried?

How strong is the IMC on this one or on the G3258 in general if you've already tested more chips?

#2 of 7, all garbage and I have not tested the IMC, as I found a very nice IMC on one of my 4790K's.

Got the Giga rolling with the help of youngpro and sofos, not quite 4000 but almost and all air cooled

Will test the same dimm under cold tomorrow.





http://valid.canardpc.com/uwifby

[Don_Dan]

Who has some great BH-5 or TCCD?

EDIT: Also interested in good Micron GTR/S (CSX).

I have good BH-5, TCCD and D9GTR, no D9GTS though!

I'll let you know if I find anything on ebay.com!

#2 of 7, all garbage and I have not tested the IMC, as I found a very nice IMC on one of my 4790K's.

Got the Giga rolling with the help of youngpro and sofos, not quite 4000 but almost and all air cooled

Will test the same dimm under cold tomorrow.

Thanks, websmile and some others seem to be quite happy with the G3258's IMC.

The IMC on your 4790K seems strong indeed, 1930 MHz on air is nice!

Good luck for your LN2 session, I hope you can reach at least 2200 MHz!

[Crabby]

#2 of 7, all garbage

That sucks

Will test the same dimm under cold tomorrow.

You get around to this yet? Just curious how high it gogogoes!!! Keep killin it man!

[Crabby]

This plus it came with an E8500 installed all for less than $100! I'm so happy that it works. Now I can use one mb (a gigabyte) to bench all my s775 cpus.

[Don_Dan]

This plus it came with an E8500 installed all for less than $100! I'm so happy that it works. Now I can use one mb (a gigabyte) to bench all my s775 cpus.

The UD3P is an excellent board, I hope you have some strong D9!

Have you tested the max FSB yet?

[Crabby]

Not any FSB testing yet. I'm doing some last minute runs for the GIGABYTE Z97 Catzilla OC Challenge. As for D9s well I have one stick of D9LPF ss 1GB c6-6-6 hahaha maybe they will do 666MHz... but hey you never know right?

This Monday you boys are going to sh1t yourselves over new (to me) GPU.

[Ace123]

I got a p55 up4 and i7 875k if someone wants to trade. I dont vintage overclock much.

[Crabby]

I got a p55 up4 and i7 875k if someone wants to trade. I dont vintage overclock much.

Oh I do want.....but I need to stop....for now.

[Don_Dan]

Not any FSB testing yet. I'm doing some last minute runs for the GIGABYTE Z97 Catzilla OC Challenge. As for D9s well I have one stick of D9LPF ss 1GB c6-6-6 hahaha maybe they will do 666MHz... but hey you never know right?

This Monday you boys are going to sh1t yourselves over new (to me) GPU.

I saw the 780 Ti score, nicely done!

You need some D9GMH to make the UD3P shine. The best D9GMH would be Crucial Ballistix 1066 16FD5, but these are hard to find nowadays, but if you don't have a kit of D9GMH yet, any kit will do.
I'll check ebay.com for you as well!

[l0ud_sil3nc3]

Same potato cpu I have tested with 3 different dimms (2x MFR, 1xCFR) and all max at the same. Wanted to make sure it wasn't voltages / settings hence 3 different dimms, but regardless, good old post code 23. Time to try another cpu.





dat close up of 23 lol

[Crabby]

I could just slap catzilla in the mouth!!

[Crabby]

A sneak peak!



Oh its so nice and I think it was a good deal<$200! This is my 1st ever Asus product, hope it was a good choice. hahaha

[Don_Dan]

Same potato cpu I have tested with 3 different dimms (2x MFR, 1xCFR) and all max at the same. Wanted to make sure it wasn't voltages / settings hence 3 different dimms, but regardless, good old post code 23. Time to try another cpu.

dat close up of 23 lol

Is this the same CPU that did 1928 MHz on air? Do you still have your old 4770K with the good IMC that did 2082 MHz?

I could just slap catzilla in the mouth!!

What happened?

A sneak peak!

Oh its so nice and I think it was a good deal<$200! This is my 1st ever Asus product, hope it was a good choice. hahaha

The GTX 580s are great cards, you'll have lots of fun!

[Crabby]

What happened?

I was fed up with it lol. I could run the bench fine with my max cpu MHz but then it would fail the "cpu" test when I oc the gpu hahaha man I even got some dry ice but never was able to save a good

run. Then I looked and the contest was over. LOL

I was able to bench am3 and catzilla 720p @5.4MHz. Almost can bench catzilla with my Crucials @1200 while am3 runs just fine.

The GTX 580s are great cards, you'll have lots of fun!

I like the card a lot, looks like new! It's already my favorite piece of hw.

[l0ud_sil3nc3]

Is this the same CPU that did 1928 MHz on air? Do you still have your old 4770K with the good IMC that did 2082 MHz?

Same cpu, and that 4770K is long gone lol

[BeepBeep2]

"BeepBeep2 - The Comeback" - Coming to theaters near you, August 9th.

[Don_Dan]

I was fed up with it lol. I could run the bench fine with my max cpu MHz but then it would fail the "cpu" test when I oc the gpu hahaha man I even got some dry ice but never was able to save a good run. Then I looked and the contest was over. LOL

I was able to bench am3 and catzilla 720p @5.4MHz. Almost can bench catzilla with my Crucials @1200 while am3 runs just fine.

AM3 is an extremely light bench nowadays.

I like the card a lot, looks like new! It's already my favorite piece of hw.

I saw you submitted the first result with the GTX 580 today, well done!

Same cpu, and that 4770K is long gone lol

I hope you find a better one!

Did you try the G3258s' IMCs for max clock?

"BeepBeep2 - The Comeback" - Coming to theaters near you, August 9th.

Can't wait!

[Ace123]

I need more R9 290xs

[Crabby]

I need more R9 290xs

Ha I was just about to say something, dang you are benching 3 now? Thats awesome!

[Ace123]

Yeah I need one more. Id also like to get another with hynix as my other two are eplida.

[ZenEffect]

sorry, my r9 290x is an elpida... and will probably go up for sale pretty soon.

[Ace123]

Msg me your price

[ZenEffect]

pm'd

[Crabby]

Oh dang I may have ruined my SOC Force!!! Such a ham fist....I bent a pin slightly but it was easily fixed and worked fine after, ran max oc and 3d benches. Then I messed up and hit the socket again with the cpu and now when I power down all the fans run still, even the gpu fans. I have to turn the psu off to fully power down. Just reloaded both bios chips and still no change. Oh well I should still be able to bench with it idk. I also burned my thumb with dry ice.

[Don_Dan]

If you can't fix it yourself, you can try contacting Gigabyte support and ask them if they can exchange the socket for a new one for a small fee, I think they can do it. Maybe someone from the U.S. already knows more about it!
When I used LN2 for the first time, I burned my thumb on a screw of my pot's mounting kit, so I can relate to that...