X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Even if FX-8120 manages to beat Andre's record, let's say it does 8800, it's still ~184% overclock.
This is equal to Geode NX-1500 running at 2840, which it will definitely do with cold :p
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Yes, this sample is not very good, but someone with good enough cpu will do 200+ %. No FX can touch that :/
That's what I wanted to say, not that I will win the stage (most probably not). Speaking generally, not 'bout my score.
Last edited by I.nfraR.ed; 06-14-2014 at 09:27 AM.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Lowest clocked FX is 8100, which would need 8400MHz valid with 454MHz HTRef/FSB clock. I don't see that happening :p
Next in line is FX-8120 with base frequency of 3.1, which means 9.3GHz.
The best possible variant is Phenom II TWKR, but I don't think it's allowed.
Last edited by I.nfraR.ed; 06-11-2014 at 01:26 PM.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Yeah, all FX should be unlocked, my bad.
Then it is easier, but still very hard in my book. How many would you bin to find a 8.4+ gem?
Every 1 MHz on a Geode is another 1% on top of the score. Not sayin' it is impossible, but it would require extreme luck or a lot of money.
I'd say - better bin Geodes.
Maybe there are other possibilities which I don't see atm.
Just sayin', I still want to see how far you can go with your FX-8120, it's about time you start benching again
PS: And sorry about hijacking this thread.
Last edited by I.nfraR.ed; 06-11-2014 at 01:42 PM.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
I have a watch on 6 of them. 8400 is a stretch, 8000 maybe not.
I don't think anyone cares about thread hijacking :P
Still don't know how you got async mem to work on DFI NFII
I almost "killed my BIOS", took 20 minutes for it to post.
EDIT:
BIOS corruption finally put a halt to me...4 LEDs of death.
The stupid thing is that it happened using CMOS Reloaded (loading my saved OC profiles) and not from asynchronous memory divider.
Moving on, pulling out the Crosshair V Formula >: )
Last edited by BeepBeep2; 06-11-2014 at 10:26 PM.
Smile
Look at the timestamps.
Still dead. I'll keep trying but I really doubt its going anywhere.
EDIT:
Going to take some personal time off until July, no results until then. Sorry guys. I need a mental break with complications behind the scenes.
Last edited by BeepBeep2; 06-13-2014 at 08:51 AM.
Smile
check out dat score
http://www.3dmark.com/sd/2173427
not amazing i know.. but with an h80i and referance block thats not bad at all?
Please welcome CL3P20!
Who's great with a soldering iron? Who has a high end AGP card? Who has some great BH-5 or TCCD?
No there's not a trend to be asking these questions, just wondering!
EDIT: Also interested in good Micron GTR/S (CSX).
Heatware
filmbot
Bookmarks