Page 1 of 4 1234 LastLast
Results 1 to 25 of 92

Thread: Just Another P55 Pictures

  1. #1
    Moderator
    Join Date
    Jun 2002
    Posts
    2,440

    Just Another P55 Pictures

    An EVGA P55 Motherboard, pretty Focused at Overclockin:



    Only 12 phase for VCore 300 to 1,100KHz.

    Dual Clock Generators, one right beside CPU, one below PCIE, Specialists.



    Slots:




    LGA775 mounting holes rotated slightly at 1degree, together with S1156 holes and socket in normal position



    F1 EE nice mount





    LICC (Low Inductance Ceramic Capacitors) used in socket cavity, same as ones used on intel cpus/chipsets, notice polar ends compared to typical MLCC




    PCIE Slot Disable Jumpers, which I find useful, this time cutting off Powergd signals to VGA Vregs for no VGA heat,
    so get your single card runs done first with second card's pot empty the whole time.




    Good old ECP support




    triple bios




    future fun







    Last edited by LardArse; 07-24-2009 at 12:40 AM.

  2. #2
    Xtreme Guru
    Join Date
    Dec 2003
    Location
    Vancouver, Canada
    Posts
    3,858
    Does it need any heat sinks or is it good to go since P55 runs so cool?
    i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
    Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
    Quote Originally Posted by CompGeek
    The US is the only country that doesn't use [nuclear weapons] to terrorize other countries. The US is based on Christian values, unlike any other country in the world. Granted we are straying from our Christian heritage, but we still have a freedom aimed diplomatic stance.

  3. #3
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,741
    Wicked stuff. Fun times ahead with these boards. You wil need a heatsink, although passive works fine on the ICH. More tweaker options on this board than any other so far.
    Last edited by Raja@ASUS; 07-23-2009 at 11:18 PM.

  4. #4
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    nice peter
    cant you guys make those PCIe jumpers into something more user friendly like slide on and off position or even using those jumpers that you can easily grab onto that have a bit of an extention facing up

    i like the look of that socket area. Prefer that over classi that has a socket close to the edge. i always fine that iceberg that sank the titanic on the edge of the board much like Giga X38/48 board did

    can you guys make a joystick based device instead of buttons on that red penal thingie
    joystick is sooo old school
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  5. #5
    I am Xtreme zanzabar's Avatar
    Join Date
    Jul 2007
    Location
    SF bay area, CA
    Posts
    15,871
    were is the voltera or is that for the "need to know basis" or "non disclosed information"
    5930k, R5E, samsung 8GBx4 d-die, vega 56, wd gold 8TB, wd 4TB red, 2TB raid1 wd blue 5400
    samsung 840 evo 500GB, HP EX 1TB NVME , CM690II, swiftech h220, corsair 750hxi

  6. #6
    Xtreme Enthusiast
    Join Date
    Oct 2006
    Location
    England
    Posts
    702
    Nice looking Board with some great features, will be watching with great interest in what this one can do.

  7. #7
    Moderator
    Join Date
    Jun 2002
    Posts
    2,440
    Quote Originally Posted by dinos22 View Post
    nice peter
    cant you guys make those PCIe jumpers into something more user friendly like slide on and off position or even using those jumpers that you can easily grab onto that have a bit of an extention facing up

    i like the look of that socket area. Prefer that over classi that has a socket close to the edge. i always fine that iceberg that sank the titanic on the edge of the board much like Giga X38/48 board did

    can you guys make a joystick based device instead of buttons on that red penal thingie
    joystick is sooo old school
    it has to be tough enough if not many new users will be calling to say their pcie slots died.

    Well I figured there were more mobile phone users than Streetfighter players (though i play a crappy Ryu :P ) , plus the other time i was texting a friend while pouring LN2 and it felt so natural to me....

  8. #8
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    wow jam packed board - triple bios too!

    why 1 degree rotation of the socket ?
    ---

  9. #9
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    SoCal
    Posts
    632
    Is P55 the next gen chipset from Intel?
    himynameisfrank
    Flickr

    i7 2600K @ 4.4Ghz
    Corsair Hydro H80
    MSI Z68A-GD80
    EVGA GTX580 x 2 SLi
    Corsair XMS3 1600 12Gb
    Corsair HX850w
    OCZ Agility 3 SSD x 3 RAID 0
    Creative X-Fi Titanium / Astro A40 Audio System
    Corsair Graphite 600T SE White
    DELL U2410 24" IPS Panel

  10. #10
    Xtreme Mentor
    Join Date
    Oct 2005
    Posts
    2,788
    Quote Originally Posted by AC3421 View Post
    Is P55 the next gen chipset from Intel?
    It's the mainstream chipset and X58 is the high end. Just like X48 and P45, X38 and P35, etc...

    Why no heatsink on the PWM? Seems like a bad idea to me.
    Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
    —Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.

  11. #11
    Xtreme Mentor
    Join Date
    Feb 2007
    Location
    Oxford, England
    Posts
    3,433
    Quote Originally Posted by eva2000 View Post
    wow jam packed board - triple bios too!

    why 1 degree rotation of the socket ?
    im guessing its so the mobo has a biit more material in between the 2 socket mounts alowise there would be a danger it could break as it would be like tinnnnnny gap between them
    "Cast off your fear. Look forward. Never stand still, retreat and you will age. Hesitate and you will die. SHOUT! My name is…"
    //James

  12. #12
    Moderator
    Join Date
    Jun 2002
    Posts
    2,440
    Quote Originally Posted by 003 View Post
    It's the mainstream chipset and X58 is the high end. Just like X48 and P45, X38 and P35, etc...

    Why no heatsink on the PWM? Seems like a bad idea to me.
    removed to take naked pictures for better perspective

  13. #13
    Moderator
    Join Date
    Jun 2002
    Posts
    2,440
    Quote Originally Posted by Jamesrt2004 View Post
    im guessing its so the mobo has a biit more material in between the 2 socket mounts alowise there would be a danger it could break as it would be like tinnnnnny gap between them
    theres no gap, the holes will overlap into each other to form peanuts

    the socket is not rotated but the 775 mount holes are

  14. #14
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    SoCal
    Posts
    632
    Quote Originally Posted by 003 View Post
    It's the mainstream chipset and X58 is the high end. Just like X48 and P45, X38 and P35, etc...

    Why no heatsink on the PWM? Seems like a bad idea to me.
    *facepalm* doh. I knew that.
    himynameisfrank
    Flickr

    i7 2600K @ 4.4Ghz
    Corsair Hydro H80
    MSI Z68A-GD80
    EVGA GTX580 x 2 SLi
    Corsair XMS3 1600 12Gb
    Corsair HX850w
    OCZ Agility 3 SSD x 3 RAID 0
    Creative X-Fi Titanium / Astro A40 Audio System
    Corsair Graphite 600T SE White
    DELL U2410 24" IPS Panel

  15. #15
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    Why triple bios?
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  16. #16
    Banned
    Join Date
    Jun 2008
    Location
    Somewhere Up to my Ears in Ye Yo
    Posts
    1,124
    Quote Originally Posted by massman View Post
    Why triple bios?
    i would asume to allow, switching between bios's easily and without entering the bios itself, allowing maybe three settings, low power, overclock 1 and overclock 2 say, or have i just got this totaly wrong? says the unfamiliar with intel boards guy..lol

    this board looks amazing, i love the all black look, this would look great in many of the newer builds that are hitting the scene, like the white murderbox mods and so on, technicaly what can you say, maybe, is there anything it doesnt have would be a better question.

    ive been feeling some love towards EVGA recently, this is the icing on the cake for me

    thanks for the pics
    Last edited by soundood; 07-24-2009 at 01:19 AM.

  17. #17
    Wanna look under my kilt?
    Join Date
    Jun 2005
    Location
    Glasgow-ish U.K.
    Posts
    4,396
    Can you discuss the PCI-E bandwidth for each slot? Im hoping the widest bandwidth slots are furthest apart... so few companies get that right

    Thanks for sharing the pics
    Quote Originally Posted by T_M View Post
    Not sure i totally follow anything you said, but regardless of that you helped me come up with a very good idea....
    Quote Originally Posted by soundood View Post
    you sigged that?

    why?
    ______

    Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.

  18. #18
    Moderator
    Join Date
    Jun 2002
    Posts
    2,440
    Quote Originally Posted by K404 View Post
    Can you discuss the PCI-E bandwidth for each slot? Im hoping the widest bandwidth slots are furthest apart... so few companies get that right

    Thanks for sharing the pics
    its marked in the picture, you have bad eyesight

  19. #19
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    iam liking it.. just that 8/4/8 pciex when running 3 way sli is not cool..

    iam looking forward to see how good the 870 will be

  20. #20
    Xtreme Addict
    Join Date
    Aug 2005
    Location
    Somewhere on earth between Taipei, Paris and Montreal
    Posts
    1,194
    \o/ Sham I already like this board
    Overclocking-TV Staff
    Quote Originally Posted by hipro5 View Post
    Ha, ha, ha.....NO WAY.....When I show someone preparing to take a shot, I hided the cigarette....

  21. #21
    I am Xtreme zanzabar's Avatar
    Join Date
    Jul 2007
    Location
    SF bay area, CA
    Posts
    15,871
    Quote Originally Posted by dpa View Post
    iam liking it.. just that 8/4/8 pciex when running 3 way sli is not cool..

    iam looking forward to see how good the 870 will be
    they only have 16x pci-e2 coming from the CPU then 4x pci-e1 coming from the SB they cant do much with it, if u wanted more lanes for sli then u would need the nf200 but that chips is worthless for sli and just adds latency so its rather worthless to want more (and it wouldent make sense for intel since this is main stream and 3/4gpu would be high end)


    dose it have a header for a TPM chip next to the front panel header or is that for the ecp
    Last edited by zanzabar; 07-24-2009 at 02:42 AM.
    5930k, R5E, samsung 8GBx4 d-die, vega 56, wd gold 8TB, wd 4TB red, 2TB raid1 wd blue 5400
    samsung 840 evo 500GB, HP EX 1TB NVME , CM690II, swiftech h220, corsair 750hxi

  22. #22
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,596
    Hope the price is not soo high :p Looks really cool and I can't wait for some first testing results from sham. specially how the 8x/8x SLI/CF and bclk behaves and what RAM voltage is healthy.
    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67

    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled

    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW

    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!

  23. #23
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,741
    Got a beta sample here, early doors but some of the tweak options are gonna leave other vendors in the dust (P55 prodding and poking adultery).

    later
    Raja

  24. #24
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Location
    Orange County, Southern California
    Posts
    583
    Does that red "EVGA Overclocking" device have a name?
    EVGA X58 SLI Classified E759 Limited Edition
    Intel Core i7 Extreme 980X Gulftown six-core
    Thermalright TRUE Copper w/ 2x Noctua NF-P12s (push-pull)
    2x EVGA GeForce GTX 590 Classified [Quad-SLI]
    6GB Mushkin XP Series DDR3 1600MHz 7-8-7-20
    SilverStone Strider ST1500 1500W
    OCZ RevoDrive 3 240GB 1.0GB/s PCI-Express SSD
    Creative X-Fi Fatal1ty Professional / Logitech G51 5.1 Surround
    SilverStone Raven RV02
    Windows 7 Ultimate x64 RTM



  25. #25
    Xtreme Guru
    Join Date
    Apr 2005
    Location
    Finland
    Posts
    4,308
    Will you have any 8 sata slot board of same caliber as this one?
    Intel? Core i5-4670K @ 4.3 GHz | ASRock Extreme6 Z87 | G.Skill Sniper 2x8GB @ DDR4-1866 CL9 | Gigabyte GTX 970 OC Windforce 3x | Super Flower Titanium 1000W | ViewSonic VX2268wm 120Hz LCD | Phanteks PH-TC14PE | Logitech MX-518 | Win 7 x64 Professional | Samsung 850 EVO & 840 Pro SSDs

    If all people would share opinions in an objective manner, the world would be a friendlier place

Page 1 of 4 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •