Just open the .bat file and check necessary commands and use Rivatuner.exe as interface to control the vgpu voltage, you don't need that fancy UI.. just apply commands to command line and change voltage with different hex-values Works fine with GTX 260 Lightning and GTX 275 Lightning
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
i dont need it any more
would have been handy for the comp thought instead of being stuck at 1.3v hehe
would be interesting though if it could be adapted to GTX285s there and see what these babies can do with 1.6v through the core heheh
Some tasty leaks
New software on the way, developed in cooperation with MSI special for Lightning series:
http://forums.guru3d.com/showthread.php?t=304325
no memory voltage adjustment
thats disappointing
What about Asus 285 TOP with UP6208?
Same as the EVGA Voltage Tuner...
Some GPU's have the ability to adjust the core voltage, if they have the right chip on the GPU...
295's can... 280's can... not 285's! Wrong voltage controller chip.
http://forums.slizone.com/index.php?showtopic=33874
I have yet to see a program that could alter the memory voltage, even on the 280 and 295's.
Last edited by Talonman; 09-08-2009 at 09:58 AM.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
Thanks for the info on the Asus 285 Matrix. I didn't know those 285's could.
We still are only talking about controlling the cores voltage, not the memory correct?
Last edited by Talonman; 09-08-2009 at 09:59 AM.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
I can confirm that the script works for the Asus Matrix GTX285.
http://www.xtremesystems.org/forums/...d.php?t=234082
Don't know about the TOP, could je run 'rivatuner.exe /i2cdump' and send me the generated .txt file?
Last edited by Mod_Aap; 09-09-2009 at 08:55 AM.
hey nice soft, can you upload SLI script again?
Thanks
Hi Guys
This software works Nice
At this picture:
http://overklokken.info/images/MSI_G...260gtxmods.jpg
for V-core but for ocp mod Just Total IMAX mod is enough? or PER CHANNEL mod shoud be do?
tnx
Bookmarks