what are load temps on your cascade?? (From memory of course:p)
what are load temps on your cascade?? (From memory of course:p)
Originally Posted by Gautam
@slovnaft excellent avatar, I approve
My k-type temp reader died last night, went to bench on the cascade and I couldn't combat coldboot bug effectively with the bypass when I had no clue what the evap temps wereSourcing a replacement and having some HWBot fun
, Chris you too are a fan of the Last Unicorn
, lol thats my little daughter favorite movie
m i hope you find a replacement for your K-type temp reader soon bro , have fun
Angelo.
![Send a message via AIM to [XC] gomeler](images/misc/im_aim.gif)
Last unicorn? Quote from a few days ago.
Angelo.
Should we have a rainbow flag or a flag with a prancing unicorn? We are PURE evil and we'll rule these easy HWBot seas with an iron fist
More seriously PURE needs an international flag and that damned question-mark flag is stupid lame. Now a pirate flag.. that strikes fear into the hearts of those above us.The little one I'm tuning idles at -94C and was loading with SPi 32M around -89C. Problem was the CBB on this chip is around -80C so I have to use the bypass to warm up the evap 25% of the time when the board gets stuck on FF due to CBB. The bigger cascade should idle around -10xC and load around -98C to -95C but that one along with the little one are going to new homes in a week's time.
They will be replaced with something bigger
The small one is for Loonym?And the other...
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
good deal man as I was hoping you would say idle 135~140 and load 120~130Last unicorn? Quote from a few days ago.
The little one I'm tuning idles at -94C and was loading with SPi 32M around -89C. Problem was the CBB on this chip is around -80C so I have to use the bypass to warm up the evap 25% of the time when the board gets stuck on FF due to CBB. The bigger cascade should idle around -10xC and load around -98C to -95C but that one along with the little one are going to new homes in a week's time.
They will be replaced with something bigger
that would be something definitely fun to play with
Hopefully you be able to find some serious time to put to the side to get your "bigger" one up and running
Last edited by Brian y.; 07-27-2009 at 01:16 PM.
That is what my new project will be. I want -130C or so loadedgood deal man as I was hoping you would say idle 135~140 and load 120~130
that would be something definitely fun to play with
Hopefully you be able to find some serious time to put to the side to get your "bigger" one up and running
Trying to find a wire-shroud enclosed fan for your condenser. Proving to be harder than I imaginedThe small one is for Loonym?
Mailman just dropped off two packages, two GTX295 dual-PCBsDriving out to grab a spare thermometer, tonight should be fun
I got the therm man!!!!!!save your moneyMailman just dropped off two packages, two GTX295 dual-PCBs
Good news Gpu unit went out todayMailman just dropped off two packages, two GTX295 dual-PCBs
Bad news another Italian bites the dust... Giorgio is leaving us
Gotta make up for it now and bust ass
Last edited by k|ngp|n; 07-27-2009 at 03:21 PM.
Dude I suck so bad. Rather than play with these new toys I went out chasing women tonight. Guess I am once again postponed. Tomorrow I'll be studying for my last final of the semester and then Thursday-Saturday benching for MOA09. PURE Unicorns, your time will come.
Sweet, I'm lazy and didn't give you a ring, it is on my list of things to do tomorrow before 5pmI got the therm man!!!!!!save your money
Shame to hear the Italians are leaving us. Guess that means the rest of you guys need to make up for it while I sit here and pretend I can benchmark.Good news Gpu unit went out today
Bad news another Italian bites the dust... Giorgio is leaving us
Gotta make up for it now and bust ass
Creating a team with "pirates" you should be ready for bad newsBad news another Italian bites the dust... Giorgio is leaving us
Too bad about memory extreme team leaving
Im sure we will still make it to the top though
Whoops double post.... anywho, I'm bored here at work and I whipped up a signature for the team to use on hwbot. Should be available to any team member
Slovnaft and gomeler, your sig is coming soon
Last edited by TheKarmakazi; 07-28-2009 at 07:54 AM.
Well, where the heck is it? Under NDA still?Whoops double post.... anywho, I'm bored here at work and I whipped up a signature for the team to use on hwbot. Should be available to any team member
Slovnaft and gomeler, your sig is coming soon
Thanks JamieWhoops double post.... anywho, I'm bored here at work and I whipped up a signature for the team to use on hwbot. Should be available to any team member
Slovnaft and gomeler, your sig is coming soon.
Angelo.
You got one for me also?
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
ooo me too
I want a fancy hwbot sig but I dont have any time to make it
DPA is killing it in 05 and nice AM3's brian and Deanzo
are you kidding me?!?!that has got to be the worst AM3 on the bot for the clocksooo me too
I want a fancy hwbot sig but I dont have any time to make it
DPA is killing it in 05 and nice AM3's brian and Deanzo
You can be tough on me, your the boss remember?
I only had about 5L of Ln2 but it is still no excuse. Got to figure out how the heck these guys are putting up these scores....and at the rate Pro is benching I will never get a chance to get back to 3D benching.......
Well I guess that depends if your a glass half full or empty kind of thinker.
When I see submissions for our team, I light up regardless. As long as your result keeps going higher and I can live with it, keep it up man, your proving your work ethic
Every other day I see DP banging on his kit making small improvements, its cool
We have some MAJOR strategy to go over once the hideout is open.
The glass will always be half empty as long as I'm thirsty......I see your point though and I can tell you one thing though, that I will keep benching my ass off for the teamWell I guess that depends if your a glass half full or empty kind of thinker.
When I see submissions for our team, I light up regardless. As long as your result keeps going higher and I can live with it, keep it up man, your proving your work ethic
Every other day I see DP banging on his kit making small improvements, its cool
We have some MAJOR strategy to go over once the hideout is open.
I can't believe i haven't gotten any results for you guys yet.
I've been benching with nothing to show, it's as painful as 'getting to know you' from the sound of music on repeat.
But this weekend I [hopefully] get my ass in gear with some LN and my mistress.
The pace you brothers are setting is just pure inspiration.
PS, anyone find it funny that my very first line of credit is with Airgas?
Hahaha thats awesome Julian. I agree also the pace being set by this team is stupefying. Gonna take the first crack at my 920 tonight, see how it goes
For any other USA team members who have an airgas in their area...
I have a corporate account there under "Uberclocker Semiconductor Test" (ask Slov for details about our "startup company"). Basically if you have good enough credit to get your own account, I can sweep you in under my corporate account.
The benefit of doing this? 50 cents per liter sound good?
ooo me too
I want a fancy hwbot sig but I dont have any time to make itPM me some details of what you would like in it, and I'd be more than happy to accomodate you guysYou got one for me also?
Last edited by TheKarmakazi; 07-28-2009 at 04:41 PM.
jamie that sig is PURE BAMF
now just add a unicorn for me
thanks for the awesome siggy, jamie
+1thanks for the awesome siggy, jamie
Posting Permissions
Reply With Quote
Bookmarks