Should I go with 4 10's or 1 18" sub?

[STEvil]

I read about 2 of your replies donnie, then I skipped all the rest. You dont have very good reading comprehension and i'm tired of it.

[Donnie27]

I read about 2 of your replies donnie, then I skipped all the rest. You dont have very good reading comprehension and i'm tired of it.

I don't think you have very good reading comprehension either but had enough tact not to mention it LOL!

[STEvil]

For anyone interested here's a video of the 18's in action on about 1800w RMS total: http://www.youtube.com/watch?v=14vUWctsYl0

Crappy cell phone video and its short, does no justice to what the system is capable of. There's a few others uploaded too but they arent worth mentioning really.

Remember this what they can do, not what they are pushed to 100% of the time, though I guess by the video it might be hard to tell anyways lol :/

[Donnie27]

For anyone interested here's a video of the 18's in action on about 1800w RMS total: http://www.youtube.com/watch?v=14vUWctsYl0

Crappy cell phone video and its short, does no justice to what the system is capable of. There's a few others uploaded too but they arent worth mentioning really.

Remember this what they can do, not what they are pushed to 100% of the time, though I guess by the video it might be hard to tell anyways lol :/

Holy Shat!!! Sweet!

[STEvil]

Some more fun stuff...

Testing excursion limits. Video is at 1/2 speed. Skip to 3:00+ for the best of it: http://www.youtube.com/watch?v=oqXf3ErKrro
My cab is moving.. and the back wall seems to have broken loose. Should dynamat it I guess. http://www.youtube.com/watch?v=KlcHszD-dMM
Windshield bouncing. Everyone's got one of these though http://www.youtube.com/watch?v=xT1P-EmoveI

[Donnie27]

Some more fun stuff...

Testing excursion limits. Video is at 1/2 speed. Skip to 3:00+ for the best of it: http://www.youtube.com/watch?v=oqXf3ErKrro
My cab is moving.. and the back wall seems to have broken loose. Should dynamat it I guess. http://www.youtube.com/watch?v=KlcHszD-dMM
Windshield bouncing. Everyone's got one of these though http://www.youtube.com/watch?v=xT1P-EmoveI

You Rock

http://www.youtube.com/watch?v=awDzd...eature=related

The last quarter of this one sounds great in my DT-770's Even using Mobo sound and Ubuntu rig I just finished.

[Hell Hound]

2x JBL W15GTi Mk2 @ 30hz

[Donnie27]

2x JBL W15GTi Mk2 @ 30hz

I've never heard one but why would you say 30Hz? Is that where it's crossed over?

* Sensitivity: 92 dB
* RMS Power Range : 800 Watts
* Peak Power Handling: 5000 Watts
* Impedance: Dual 6 Ohm
* Low Frequency response: 16 Hz
* High Frequency Response: 1000 Hz
* Diameter: 15 Inch

[Hell Hound]

I like 30-40 under 20 sounds a little muddy to me,I like crisp clean bass,and that truck needs damping that rattle and clank is just nasty.Not you STEvil that was just for testing right.STEvil get a GMC or Bronco and your 18's will kill all

[Donnie27]

I like 30-40 under 20 sounds a little muddy to me,I like crisp clean bass,and that truck needs damping that rattle and clank is just nasty.Not you STEvil that was just for testing right.STEvil get a GMC or Bronco and your 18's will kill all

SO crossed over at 30Hz? Yes, I had that low end talk with Stevil and know exactly where 30Hz is. I play Bass Guitar and 30Hz is the lowest note on my B String. For none Bass Players that's the Open Note on the fat top string of a 5 string bass.

Newer Music is recorded in Freqs lower than 30Hz BTW!

[STEvil]

My box peaks at 37hz. Termlab tested to 143.8db so far. The huge port and distance from the roof makes it act like a 6th order bandpass somewhat though and I get very flat response all the way from 15hz to 45hz..

Truck is a chevy 2500.. GMC's are just Chevy's with cheaper parts

[Donnie27]

My box peaks at 37hz. Termlab tested to 143.8db so far. The huge port and distance from the roof makes it act like a 6th order bandpass somewhat though and I get very flat response all the way from 15hz to 45hz..

Truck is a chevy 2500.. GMC's are just Chevy's with cheaper parts

I thought Chevys were GMC's with Cheaper parts?

http://www.carstereo.com/help/Articles.cfm?id=32