is that from one of your warmup sessions jody
New challenge..........who will grow the cwaziest mustache here ... Jody's in the lead
is that from one of your warmup sessions jody
New challenge..........who will grow the cwaziest mustache here ... Jody's in the lead
what he said ^
in the full size screen shot i have the voltages listed. was likely 1.88v set or something like that. the kit goes up to 1054MHz 6-6-5 with the same volts.
definitely just a warm up while i wait for an RMA on my CPU because i haven't had time to send it out because i have too many reviews on the go ever since i put a list of contacts in my XS signature and hardware started pouring in.
but i will definitely be trying for better if i can find a CPU with better uncore and a kit of memory that can do the same clocks because i don't want to use this kit anymore because it is for memory reviews from my huge list of contacts.
you know how it is
sweet cant wait to see what the new silicone brings to this thread
*Update*
@George: Oh, thatīs a nice way to avoid 2:10. The dedication is much appreciated!
*Update*
may i join?
8.** zone
Config:
- i7-920 // SS 1.2 HP
- EVGA Classified E760 // bios E76044
- KHX 2k cas8 // silverstone 80mm
- 6200 LE PCI-E 256 MB
- P&C 1200
- 2003 Sever TW // fully tweaked + copy waza
super-pi 32M // 8.59.844 // 950 @ 3833.3 MHz // KHX 2k cas8 @ 912 MHz 6-6-4-18
3833.3.....Mafio.....8.59.844....182.5x21....912,7 .....6-6-4-18...2/10..X58
I7 920 D0 5362 1.627v
980X retail 3003A258 - 6683mhz 1.85v
ASUS R3X 265bclk
ASUS R3BE 266bclk
_______________________________________
Xtreme 3D Team Hungary
8.xx
3832.3......Mafio.............8.59.985....17x225.4 ......901.7MHz......6-6-4-18.....2/8..X58
Last edited by Mafio; 11-01-2010 at 12:48 PM.
yes, STT rulez...especially when i paid only 200 € for them (including shipping cost and customs fee)
i see a lot of guys using tRRD and tRTP both at 1 but i can't find the way to run them that tight.
CPU-tweaker always shows 4 and 2...
force them to 1 in windows doesn't give any performance improvement.
Last edited by Mafio; 10-29-2010 at 10:11 AM.
the problem is that when i set them to 1 in bios CPU-Tweaker ALWAYS show me tRRD 4 and tRTP 2.
force them in windows to 1 doesn't make my super-pi faster...my guess is: all of these guys that use tRRD 1 and tRTP 1 force them to 1 in windows or boot directly with 1 - 1 ?
if they can boot 1 - 1 would be good to know how they did it because i can't find the way to do it
if i set 1 - 1 windows boot normally but when i check with CPU-Tweaker i see tRRD 4 and tRTP 2...
think that's the correct result Mafio .. can just leave at tRRD 4, tRTP 2
i don't find any faster at 1 either (cputweaker set only), although i still do it on mine when i set tREF
can you tighten rtl on 226bclk cl6 setting ?
20x uncore is 60-62-63/64, 21x should only be ~ +3 per channnel eg 63-65-66/67.
any more runs coming ?
Maximus V GENE [0086] :: 3770K L212B244 :: H70 :: EB3103A (PSC)
CL|WCL|RTL performance (SB) : 32M scaling charts : PSC WCL > CL performance bug
good to know that i'm not the only one that can't run 1 - 1
no way to use tighter RTLs, what you see are the tightest values i can set
the best i can do is 66-68-70, with only one less i lose 1 stick or 32M gives errors.
BTW, yes, i've something more
same setup as before except for RAM, this time i used the good old trusty HyperX 2000 cas8
10.xx
3086.1......Mafio.............10.59.610....13x237. 4......950MHz......6-6-5-18.....2/8..X58
HyperX Hypers FTW I still cherish mine.
Sometimes a good slap in the face is all you need
Bios my arss.....
I can fix this problem with a hardware mod.... Hipro5
"Overclock till death. Overclocking is life." Hipro5
wow mafio nice clocks on the rams there!
damn astridies i will say it again, that is a very fast run,
i have been playing over the last few days with UD3R and R3E... Rampage 3 Extreme is so fast and the best thing is, its so EASY to make it go this fast, giga is more effort but I think it is possible the UD9 with bloomsfield microcode bios is faster than r3e,
I am using B1 cpu because it does not need bloomsfield microcode to be very fast, but at the same time, i do think that mrc bios does work wonder on UD9 and low 6-6-5 style ram clocks, my original runs were 36.5 with only 4000 MHz, I think by knocking to 4007 they should be in 35.7 range or so.. same with the R3E..
either for ease of fast 32m, r3e is your board, and for price, i think ud3r is very nice..
Last edited by youngpro; 11-03-2010 at 04:23 PM.
scary fast run pro
i need to try 32M with one of these GB boards, they look a lot faster than classified that i'm using now.
*Update*
... thinking about Sandy Bridge color scheme ...
Bookmarks