If previously i was using a Raid 0 config on a Intel X58 setup... Now i'm gonna use the Raid 0 Config over @ AMD AM3 setup. Do i need to re setup my Raid 0?
Or can i just use it w/o a cleaning??
If previously i was using a Raid 0 config on a Intel X58 setup... Now i'm gonna use the Raid 0 Config over @ AMD AM3 setup. Do i need to re setup my Raid 0?
Or can i just use it w/o a cleaning??
i think you do have to set it up again but i might be wrong, i had to do it when i switched
You can't port on board raids so most likely you will have to set up.
I was able to switch between the promise controller and the AMD controller on the same motherboard. I think it was my MSI K9A2 Plat.
C3 Phenom II 965 BE (0941CPMW)
Msi 790Fx-GD 70
2x2 gb OCZ AMD Black Edition 1600mhz DDR 3
2x MSI HD 5850's OC edition X-fire
2x Western Digital 250gb 16mb cache Raid-0
1x Seagate 1 TB Data
SILVERSTONE|DA700 700W RT Power Supply
Koolance INX-720 (Koolance 345 block)
LianLi pc-60fwb
From Intel Southbridge to AMD... Anyone have experience?
Different controller, you'll have to make a new RAID. I didn't have to moving from a P5Q-Deluxe to a BloodRAGE, but they're both ICH10R.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
I migrated my 939 dual core nvidia dfi XP install to a PhII 720 AMD m3a79 delux without major incident, see post #8
http://forums.overclockers.co.uk/sho...php?t=17987920
I later discovered I had a problem with my Logitech mouse and dxinput, uninstall / reinstall and all was good but in hindsight I'd either uninstall prior to making the image or see what happens if the mouse is connected to the new pc prior to first boot.
He's not talking about migrating a single drive, he wants to move a RAID array to a completely different type of controller. Quite different.Originally Posted by ecat
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
From the linked post ...
I wanted to transfer my complete OS install from on board RAID0 on my old DFi nF4 chipset 939 board to on board RAID0 on my new Asus M3A79-T Deluxe AM2+ board, so I gave sysprep a try
Reading fail...my bad.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
LOL this is still from AMD to AMD...From the linked post ...
I think i'm gonna try n do Intel to AMD migration...
I keep my finger crossed... If i plug in n it doesn't read... can i still plug it into a Intel setup to backup the data?
Happens to us allReading fail...my bad.
You'll avoid a lot of headaches installing Windows from scratch. Honestly, you'd be better off with a fresh install.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
Yup.. i understand...
I will install a fresh OS... but before i do that, i need to extract my data out
ICH: Intel Controller Hub, it's not compatible with AMD. If you want to get your data off it, find another intel board to plug it into
TJ07 | Corsair HX1000W | Gigabyte EX58 Extreme | i7 930 @ 4ghz | Ek Supreme | Thermochill PA 120.3 | Laing DDC 12v w/ mod plexi top | 3x2gb Corsair 1600mhz | GTX 680 | Raid 0 300gb Velociraptor x 2 | Razer Lachesis & Lycosa | Win7 HP x64 | fluffy dice.
Posting Permissions
Reply With Quote
Bookmarks