Silverstone TJ07, X58 Classified, Dominator GT, i7 920 D0 (3849B041)

[Kuntz]

Well at first try I did 180x20 3600MHz overclock at full stock voltages (no auto's), and was OCCT Stable for 1 hour, and MemTest86+ stable for 1 pass. My 4 core temps were 51-49-49-45 (48.5 avg) max. My CPU-Z voltages were either 1.141 or 1.152 volts. Going to now try 190x20 haha.

2nd try was 4GHz stock voltages, couldn't boot into Windows. So I dropped it to 190x20 3800MHz and it's 1 hour stable:

[jiggyghallam]

haha great build, very funny

and how was bruno?

[Kuntz]

Bruno was awesome! I haven't ever laughed that hard in my life! hahaha

[sinticfury]

Lol I just went out today and shopped for super hard black cardboard, managed to pick it up at Michaels then I cut it up to make a flooring jsut for the hell of it. Doesnt look too bad....... From far. XD

[Kuntz]

I ordered 2 more UV Lights, but other than that, this is pretty much the final deal right here.

As promised before, some HQ professional pictures will be coming eventually. First I will get those extra UV's installed, and then I will have my uncle come over and take the shots.

For now you can take a look at the final touches. Also, I re-wired some stuff and re-did some cable management in the back of the case. There are no pictures of it as it's not interesting.

[barretp]

looks awesome, what graphics cards are you running again?

[Rise]

hahaha i love the temp through the tubing, great job!

[Blizzy]

Great build mate
That was a lesson on how to use and reuse everything you've got! Even McD npkins lol

[Kuntz]

looks awesome, what graphics cards are you running again?

3870 512 + 3850 256 in CFX

hahaha i love the temp through the tubing, great job!

Since it's through the water, it's actually upside down, and that is a 25, not 52.

Great build mate
That was a lesson on how to use and reuse everything you've got! Even McD npkins lol

Everything has it's place my friend!

[JoeChuo]

OMG! Great job!
Just like a horror novel ... full of surprises! Make me giving up on modding ... haha!

[sinticfury]

Lol this is funny, just gets better and better.

[Kuntz]

OMG! Great job!
Just like a horror novel ... full of surprises! Make me giving up on modding ... haha!

Lol this is funny, just gets better and better.

Thanks!

[tamtam1]

Finished? What about some more nice pictures - don´t hide your nice hardware.

[Kuntz]

Just had these taken Sunday afternoon, they are really big! (3264x2448)

Check out the ghosting in the 7th picture, on the glass.

http://k-u-n-t-z.com/wl/hd/01.jpg
http://k-u-n-t-z.com/wl/hd/02.jpg
http://k-u-n-t-z.com/wl/hd/03.jpg
http://k-u-n-t-z.com/wl/hd/04.jpg
http://k-u-n-t-z.com/wl/hd/05.jpg
http://k-u-n-t-z.com/wl/hd/06.jpg
http://k-u-n-t-z.com/wl/hd/07.jpg
http://k-u-n-t-z.com/wl/hd/08.jpg

[Kuntz]

Here's some edited for size etc:

[STRMX]

have to say funnest work log ever

i love the evga classified and dominator GT combo so much that i am going to be using it in my next build

nice pics

[dejanh]

Nice work

[perkam]

The tubing configuration is a tad messy. But beyond that, it looks like a great build

I will echo the thoughts of a previous unruly member who didn't have the decency to word it right: You have done an amazing job of using every available resource, but you could have opted for a cheaper components to increase your W/C budget and avoid some of the less professional mods

This has been an amazingly enjoyable thread though. Probably one of the best worklogs ever

Perkam

[pingpong1455]

looks great though i think some nice white leds would look better than the uv

[Kuntz]

Just a quick update, I am currently at 4400MHz and 1.375 vcore / 1.375 vtt, 24/7 stable under OCCT Small, OCCT Large, and OCCT Linpack 90%. Average temp under Linpack load is 69.75c, and the average Idle is 47.75c!

http://valid.canardpc.com/show_oc.php?id=639277

[blaxtr3m3]

Just a quick update, I am currently at 4400MHz and 1.375 vcore / 1.375 vtt, 24/7 stable under OCCT Small, OCCT Large, and OCCT Linpack 90%. Average temp under Linpack load is 69.75c, and the average Idle is 47.75c!

http://valid.canardpc.com/show_oc.php?id=639277

that's gr8 temps you got there
I have 2 say u know how 2 make a log funny
how r u liking the g19?

[Kuntz]

that's gr8 temps you got there
I have 2 say u know how 2 make a log funny
how r u liking the g19?

Thanks! G19 is great, though I've only had it for a few weeks, so I haven't gamed on it yet. I like the keys and layout a lot more than the G15. I also like that I can select from any 24-bit color as my LED backlight for my keyboard. Red looks awesome in the dark. The color LCD display runs at 60Hz it seems, it's very smooth for video playback, and the 'analog' clock has hands that move smoothly rather then stutter. It's also smaller than the G15 as well, and it's the first keyboard I've seen that requires a seperate 120v plug-in on top of the USB haha.

[Arthur]

Absolutely funny and cheap WC Worklog. Conratulations mate.

[blaxtr3m3]

Thanks! G19 is great, though I've only had it for a few weeks, so I haven't gamed on it yet. I like the keys and layout a lot more than the G15. I also like that I can select from any 24-bit color as my LED backlight for my keyboard. Red looks awesome in the dark. The color LCD display runs at 60Hz it seems, it's very smooth for video playback, and the 'analog' clock has hands that move smoothly rather then stutter. It's also smaller than the G15 as well, and it's the first keyboard I've seen that requires a seperate 120v plug-in on top of the USB haha.

nice to hear u like it , I am going to replace it with my lycosa which is horrible for gaming ar any serious typing looks good though

[Kuntz]

nice to hear u like it , I am going to replace it with my lycosa which is horrible for gaming ar any serious typing looks good though

It'll set you back a pretty penny though lol, I think it now holds the record for being the most expensive keyboard ever.