Page 4 of 62 FirstFirst 12345671454 ... LastLast
Results 76 to 100 of 1533

Thread: DFI UT X58-T3EH8 continued - Part 2

  1. #76
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,776
    PRJ also check your IOH/ICH voltages too - 2 threads worth reading

    1. Prime95/LinX/Super Pi 32M stability tweaks
    2. DFI UT X58 - tRRD, RTL, tFAW timing discussion.

    Windows memtest isn't really useful at all for cpu vtt/mem testing for me i can pass windows memtest at lower cpu vtt than 8x32m hyperpi or linx or single 32m pi require.

    also since you're running GT mem try 7-8-7-20 instead.

    Also on vista/win7 maybe need to disable audio device/driver for super pi for some folks

    try running 8x 32m pi via hyperpi v0.99b if you can pass that at higher mem frequency than single super pi 32m, then you may have the issue Praz described. If not then more likely setting wise you haven't found the right settings/voltages.
    Last edited by eva2000; 06-07-2009 at 02:40 PM.
    ---

  2. #77
    Xtreme Member
    Join Date
    Jan 2003
    Location
    Norway
    Posts
    207
    Played with my W3520 3848A352 this weekend.



    Difficult to get passed 222 in wprime, regardles of volts tried




    This is max I can boot from bios and run 1m.

    Air cooled with TRUE and 1x120mm Pabts 38db, 23 degrees ambient.

  3. #78
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,776
    Sniper for higher bclk need more cpu vtt probably 1.55-1.65v
    ---

  4. #79
    Xtreme Member
    Join Date
    Jan 2003
    Location
    Norway
    Posts
    207
    Tried up to 1.6 vtt, with vmem up to 1.79v. No help, rather the opposite as it adds heat.

    Using 6GB OCZ Platinum 1333, so I can only use 6 mp, think that is what lets me get away with "low" vtt.

  5. #80
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Hong Kong
    Posts
    327
    Guys I was wondering why i7 920 is running so hot under a WC setup...
    Temps hit 78~80C while priming @ 1.28v, VTT @1.37v set in BIOS, ambient nearly 30C. I'm using a AC cuplex XT di with 1366 mount powered by TC PA120.3 with 3 TT thunderblade 78CFM fan at full speeds...what should I do
    Intel XEON X5650 B1 Retail x2 3012A692

    EVGA Classified SR-2 BIOS A50
    Crucial Ballistix PC3-1333 CL6 D9GTR 2G Kit (Active)
    Crucial Ballistix PC3-2000 CL9 D9GTS 2G Kit (Active)
    Thermaltake V1R (in use, without heatpipe)
    Cooler Master Silent Pro M 1000W PSU
    Galaxy GTX 275 (Digital PWM)
    WD 10EALX

    Overclock:
    Currently running @ Default.

    Intel i7-2600K (L041C107, L048B284, L050A853)
    Asus P8P67 Pro BIOS 1305
    WC setup EK Supreme HF GOLD Edition powered by BlackICE GTX 480
    G.Skill 12800CL7D-4GBECO x2 packs
    WD 10EALX
    Intel X25-M 120GB
    MSI NGTX560Ti Twin Frozer SLI

    Overclock:
    40x100 4Ghz 1.15v [Currently testing L048B284]

  6. #81
    Xtreme Member
    Join Date
    May 2006
    Location
    Nęstved, Denmark
    Posts
    199
    Quote Originally Posted by ci2kla View Post
    Guys I was wondering why i7 920 is running so hot under a WC setup...
    Temps hit 78~80C while priming @ 1.28v, VTT @1.37v set in BIOS, ambient nearly 30C. I'm using a AC cuplex XT di with 1366 mount powered by TC PA120.3 with 3 TT thunderblade 78CFM fan at full speeds...what should I do
    What thermal paste are u using, maybe re apply new layer ;o)
    EVGA X58 Classified
    Intel i7 920 D0
    3 x 2 GB Corsair GT 2000
    Evga GTX 480 FTW
    Corsair AX 1200 PSU
    Watercooling EK & Swiftech
    160 GB OCZ RevoDrive X2 PCI-Express SSD

  7. #82
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,776
    Quote Originally Posted by Sniper View Post
    Tried up to 1.6 vtt, with vmem up to 1.79v. No help, rather the opposite as it adds heat.

    Using 6GB OCZ Platinum 1333, so I can only use 6 mp, think that is what lets me get away with "low" vtt.
    try lowing IOH/ICH from 1.31v as it might not need that much try 1.19v to 1.23v for IOH/ICH

    Quote Originally Posted by ci2kla View Post
    Guys I was wondering why i7 920 is running so hot under a WC setup...
    Temps hit 78~80C while priming @ 1.28v, VTT @1.37v set in BIOS, ambient nearly 30C. I'm using a AC cuplex XT di with 1366 mount powered by TC PA120.3 with 3 TT thunderblade 78CFM fan at full speeds...what should I do
    some i7 cpus have more leakage and thus run hotter. What are you tempts for stock i7 920 versus what you need for 3.8ghz and 4.0ghz prime95 ?
    ---

  8. #83
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Hong Kong
    Posts
    327
    Quote Originally Posted by eva2000 View Post
    some i7 cpus have more leakage and thus run hotter. What are you tempts for stock i7 920 versus what you need for 3.8ghz and 4.0ghz prime95 ?
    1.225v approx for 4Ghz prime 95 and temps hit 70~72C under load, 1.28v @ 4.2Ghz hits 78~80C recorded in coretemp, assuming ambient @ 30C

    Quote Originally Posted by PRJ View Post
    What thermal paste are u using, maybe re apply new layer ;o)
    AS5 My Friend
    Intel XEON X5650 B1 Retail x2 3012A692

    EVGA Classified SR-2 BIOS A50
    Crucial Ballistix PC3-1333 CL6 D9GTR 2G Kit (Active)
    Crucial Ballistix PC3-2000 CL9 D9GTS 2G Kit (Active)
    Thermaltake V1R (in use, without heatpipe)
    Cooler Master Silent Pro M 1000W PSU
    Galaxy GTX 275 (Digital PWM)
    WD 10EALX

    Overclock:
    Currently running @ Default.

    Intel i7-2600K (L041C107, L048B284, L050A853)
    Asus P8P67 Pro BIOS 1305
    WC setup EK Supreme HF GOLD Edition powered by BlackICE GTX 480
    G.Skill 12800CL7D-4GBECO x2 packs
    WD 10EALX
    Intel X25-M 120GB
    MSI NGTX560Ti Twin Frozer SLI

    Overclock:
    40x100 4Ghz 1.15v [Currently testing L048B284]

  9. #84
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    226
    ci2kla: I have almost the same water as you, i use 2xtrippel( 1xthermochill and 1xswiftech), 655-pump and Cuplex HD and have the same problem as you...but i will buy another top to my GTX and 1366 mounting.
    I think i will get better temps then, becouse the AC-blocks is not the best one
    1.pc: Evga 4way, 980X, 3x5870, 3x2 1600mhz GT
    Storage: 3xOcz Vertex 1, Vertex 2 64gb and 2x150gb Raptor. -Updating-

  10. #85
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Hong Kong
    Posts
    327
    Quote Originally Posted by The Water Dog View Post
    ci2kla: I have almost the same water as you, i use 2xtrippel( 1xthermochill and 1xswiftech), 655-pump and Cuplex HD and have the same problem as you...but i will buy another top to my GTX and 1366 mounting.
    I think i will get better temps then, becouse the AC-blocks is not the best one
    Oh really? Should I switch to Enzotech PHOENIX / EK Supreme LT?....
    Seems the results will be better if place this block to my LGA775 build
    Intel XEON X5650 B1 Retail x2 3012A692

    EVGA Classified SR-2 BIOS A50
    Crucial Ballistix PC3-1333 CL6 D9GTR 2G Kit (Active)
    Crucial Ballistix PC3-2000 CL9 D9GTS 2G Kit (Active)
    Thermaltake V1R (in use, without heatpipe)
    Cooler Master Silent Pro M 1000W PSU
    Galaxy GTX 275 (Digital PWM)
    WD 10EALX

    Overclock:
    Currently running @ Default.

    Intel i7-2600K (L041C107, L048B284, L050A853)
    Asus P8P67 Pro BIOS 1305
    WC setup EK Supreme HF GOLD Edition powered by BlackICE GTX 480
    G.Skill 12800CL7D-4GBECO x2 packs
    WD 10EALX
    Intel X25-M 120GB
    MSI NGTX560Ti Twin Frozer SLI

    Overclock:
    40x100 4Ghz 1.15v [Currently testing L048B284]

  11. #86
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    226
    no, if you can afford it i will say Heatkiller...after what i know they are one of the best on I7.
    I will post my temps when i get my custom GTX-top and 1366 mounting.
    I saw one test of the AC blokcs against EK, Swiftech and so on...AC loose
    1.pc: Evga 4way, 980X, 3x5870, 3x2 1600mhz GT
    Storage: 3xOcz Vertex 1, Vertex 2 64gb and 2x150gb Raptor. -Updating-

  12. #87
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Posts
    544
    Eva, any suggestions for Bclk>230Mhz ?
    Tried PCI-E up to 114Mhz (won't post at 115Mhz) and PCI-E at 1.7V, IOH (or ICH, I don't recall) at 1.26-1.32.
    Haven't gone crazy with the VTT, maybe 1.58 at the max and all I could hit is 228Mhz which was very unstable.
    Last edited by The-Fox; 06-08-2009 at 07:19 AM.

    PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
    WaterCooling: Q² Project by The-Fox
    CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
    GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3



  13. #88
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Hong Kong
    Posts
    327
    Quote Originally Posted by The Water Dog View Post
    no, if you can afford it i will say Heatkiller...after what i know they are one of the best on I7.
    I will post my temps when i get my custom GTX-top and 1366 mounting.
    I saw one test of the AC blokcs against EK, Swiftech and so on...AC loose
    Oh my....
    anyway can you share the link please?
    Intel XEON X5650 B1 Retail x2 3012A692

    EVGA Classified SR-2 BIOS A50
    Crucial Ballistix PC3-1333 CL6 D9GTR 2G Kit (Active)
    Crucial Ballistix PC3-2000 CL9 D9GTS 2G Kit (Active)
    Thermaltake V1R (in use, without heatpipe)
    Cooler Master Silent Pro M 1000W PSU
    Galaxy GTX 275 (Digital PWM)
    WD 10EALX

    Overclock:
    Currently running @ Default.

    Intel i7-2600K (L041C107, L048B284, L050A853)
    Asus P8P67 Pro BIOS 1305
    WC setup EK Supreme HF GOLD Edition powered by BlackICE GTX 480
    G.Skill 12800CL7D-4GBECO x2 packs
    WD 10EALX
    Intel X25-M 120GB
    MSI NGTX560Ti Twin Frozer SLI

    Overclock:
    40x100 4Ghz 1.15v [Currently testing L048B284]

  14. #89
    Xtreme Member
    Join Date
    May 2006
    Location
    Nęstved, Denmark
    Posts
    199
    Quote Originally Posted by eva2000 View Post
    PRJ also check your IOH/ICH voltages too - 2 threads worth reading

    1. Prime95/LinX/Super Pi 32M stability tweaks
    2. DFI UT X58 - tRRD, RTL, tFAW timing discussion.

    Windows memtest isn't really useful at all for cpu vtt/mem testing for me i can pass windows memtest at lower cpu vtt than 8x32m hyperpi or linx or single 32m pi require.

    also since you're running GT mem try 7-8-7-20 instead.

    Also on vista/win7 maybe need to disable audio device/driver for super pi for some folks

    try running 8x 32m pi via hyperpi v0.99b if you can pass that at higher mem frequency than single super pi 32m, then you may have the issue Praz described. If not then more likely setting wise you haven't found the right settings/voltages.
    I've changed to 7-8-7-20 & ioh/ich 1.21 & vioh analogue 1.2v & Vdimm 1.665 and still i can't pass 32 mb superpi. I havent tryed all your suggestions yet, so theres still some hope, will reply with results...
    EVGA X58 Classified
    Intel i7 920 D0
    3 x 2 GB Corsair GT 2000
    Evga GTX 480 FTW
    Corsair AX 1200 PSU
    Watercooling EK & Swiftech
    160 GB OCZ RevoDrive X2 PCI-Express SSD

  15. #90
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    226
    Quote Originally Posted by ci2kla View Post
    Oh my....
    anyway can you share the link please?
    http://www.overclock3d.net/reviews.p...ock_shootout/5

    here you are, mate.
    Its not "awful", but its not the best.
    But i have heard someone said they think its good and other hates it.
    My first waterblock was AC and that did the job then( some years ago)
    But i think on I7 its not good enough becouse of the heat that I7 makes.
    Its not the best test, but i stressed to find one so you didnt have to wait ages before i replied:P
    Last edited by The Water Dog; 06-08-2009 at 07:36 AM.
    1.pc: Evga 4way, 980X, 3x5870, 3x2 1600mhz GT
    Storage: 3xOcz Vertex 1, Vertex 2 64gb and 2x150gb Raptor. -Updating-

  16. #91
    Xtreme Member
    Join Date
    May 2006
    Location
    Nęstved, Denmark
    Posts
    199
    Quote Originally Posted by PRJ View Post
    I've changed to 7-8-7-20 & ioh/ich 1.21 & vioh analogue 1.2v & Vdimm 1.665 and still i can't pass 32 mb superpi. I havent tryed all your suggestions yet, so theres still some hope, will reply with results...
    Quote Originally Posted by eva2000 View Post
    PRJ also check your IOH/ICH voltages too - 2 threads worth reading

    1. Prime95/LinX/Super Pi 32M stability tweaks
    2. DFI UT X58 - tRRD, RTL, tFAW timing discussion.

    Windows memtest isn't really useful at all for cpu vtt/mem testing for me i can pass windows memtest at lower cpu vtt than 8x32m hyperpi or linx or single 32m pi require.

    also since you're running GT mem try 7-8-7-20 instead.

    Also on vista/win7 maybe need to disable audio device/driver for super pi for some folks

    try running 8x 32m pi via hyperpi v0.99b if you can pass that at higher mem frequency than single super pi 32m, then you may have the issue Praz described. If not then more likely setting wise you haven't found the right settings/voltages.
    I can't pass hyperpi v0.99b

    I tryed @ optimized default settings, just disabeling the things i dont use, setting HPET for 64 bit and the usual. NOT even here was superpi able to finish...!! Somthing must be wrong!
    EVGA X58 Classified
    Intel i7 920 D0
    3 x 2 GB Corsair GT 2000
    Evga GTX 480 FTW
    Corsair AX 1200 PSU
    Watercooling EK & Swiftech
    160 GB OCZ RevoDrive X2 PCI-Express SSD

  17. #92
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,776
    PRJ, try downgrading to 2/27 or 2/17 bios and try again
    ---

  18. #93
    Xtreme Addict
    Join Date
    Feb 2006
    Location
    Potosi, Missouri
    Posts
    2,296
    Quote Originally Posted by PRJ View Post
    I can't pass hyperpi v0.99b

    I tryed @ optimized default settings, just disabeling the things i dont use, setting HPET for 64 bit and the usual. NOT even here was superpi able to finish...!! Somthing must be wrong!
    Audio Services need to be disabled if running Vista. First option in HyperPi.

  19. #94
    Xtreme Member
    Join Date
    May 2006
    Location
    Nęstved, Denmark
    Posts
    199
    @eva2K - Ok, I'll try downgrading to older Bios..

    @Praz - I did Disable Audio in hyperpi v0.99b, but will try with older bios an d disabled Audio again
    Last edited by PRJ; 06-08-2009 at 10:16 AM.
    EVGA X58 Classified
    Intel i7 920 D0
    3 x 2 GB Corsair GT 2000
    Evga GTX 480 FTW
    Corsair AX 1200 PSU
    Watercooling EK & Swiftech
    160 GB OCZ RevoDrive X2 PCI-Express SSD

  20. #95
    Xtreme Addict
    Join Date
    Feb 2006
    Location
    Potosi, Missouri
    Posts
    2,296
    8 instances of HyperPi won't pass either?

  21. #96
    Xtreme Member
    Join Date
    May 2006
    Location
    Nęstved, Denmark
    Posts
    199
    Quote Originally Posted by Praz View Post
    8 instances of HyperPi won't pass either?
    I can pass 8 instances of HyperPi if its 1M, same goes for superpi

    Downgraded bios to 2/27 but even at default I had no luck with eigther 32M test

    EVGA X58 Classified
    Intel i7 920 D0
    3 x 2 GB Corsair GT 2000
    Evga GTX 480 FTW
    Corsair AX 1200 PSU
    Watercooling EK & Swiftech
    160 GB OCZ RevoDrive X2 PCI-Express SSD

  22. #97
    Worlds Fastest F5
    Join Date
    Aug 2006
    Location
    Room 101, Ministry of Truth
    Posts
    1,612
    Hi Eva + everyone

    First of all thanks for 2 fantastic threads regarding this board, there is so much good info in here that I almost do not want to look so I have my own adventures

    Just a little problem:

    I think it is probably due to this board winning the "best OC" award in Taipei but all links to it have dissappeared from the DFI site... I hope that this is just due to writing updates etc but it does not help me much as I have one arriving tomorrow (at last! AT LAST!!! ) and I need to download the latest drivers / check out new bios releases (if any since last beta)...

    H E L P!
    X5670 B1 @175x24=4.2GHz @1.24v LLC on
    Rampage III Extreme Bios 0003
    G.skill Eco @1600 (7-7-7-20 1T) @1.4v
    EVGA GTX 580 1.5GB
    Auzen X-FI Prelude
    Seasonic X-650 PSU
    Intel X25-E SLC RAID 0
    Samsung F3 1TB
    Corsair H70 with dual 1600 rpm fan
    Corsair 800D
    3008WFP A00



  23. #98
    Xtreme Member
    Join Date
    May 2006
    Location
    Nęstved, Denmark
    Posts
    199
    EVGA X58 Classified
    Intel i7 920 D0
    3 x 2 GB Corsair GT 2000
    Evga GTX 480 FTW
    Corsair AX 1200 PSU
    Watercooling EK & Swiftech
    160 GB OCZ RevoDrive X2 PCI-Express SSD

  24. #99
    Worlds Fastest F5
    Join Date
    Aug 2006
    Location
    Room 101, Ministry of Truth
    Posts
    1,612
    Thank you for the bios link

    Now what shall I do about drivers?

    Any stores or mirrors anywhere or shall I use the download page for the LANPARTY DK X58-T3eH6 since that is still accessable?

    Edit: Looks like the X58 JR is missing from the DFI site too.... has this been going on for a while

    Edit #2: Actually it looks like a browser issue as I can see the T3H8 listed when I look with Safari but it is nowhere to be found when I look with IE8...

    Edit #3: Direct link to DFI UT X58-T3eH8 downloads page here just in case anyone has difficulty seeing it like it did...
    Last edited by Biker; 06-08-2009 at 01:52 PM.
    X5670 B1 @175x24=4.2GHz @1.24v LLC on
    Rampage III Extreme Bios 0003
    G.skill Eco @1600 (7-7-7-20 1T) @1.4v
    EVGA GTX 580 1.5GB
    Auzen X-FI Prelude
    Seasonic X-650 PSU
    Intel X25-E SLC RAID 0
    Samsung F3 1TB
    Corsair H70 with dual 1600 rpm fan
    Corsair 800D
    3008WFP A00



  25. #100
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Hong Kong
    Posts
    327
    Quote Originally Posted by The Water Dog View Post
    http://www.overclock3d.net/reviews.p...ock_shootout/5

    here you are, mate.
    Its not "awful", but its not the best.
    But i have heard someone said they think its good and other hates it.
    My first waterblock was AC and that did the job then( some years ago)
    But i think on I7 its not good enough becouse of the heat that I7 makes.
    Its not the best test, but i stressed to find one so you didnt have to wait ages before i replied:P
    Thanks alot for the info but wait! Isn't that's the cuplex HD instead of XT di?
    Intel XEON X5650 B1 Retail x2 3012A692

    EVGA Classified SR-2 BIOS A50
    Crucial Ballistix PC3-1333 CL6 D9GTR 2G Kit (Active)
    Crucial Ballistix PC3-2000 CL9 D9GTS 2G Kit (Active)
    Thermaltake V1R (in use, without heatpipe)
    Cooler Master Silent Pro M 1000W PSU
    Galaxy GTX 275 (Digital PWM)
    WD 10EALX

    Overclock:
    Currently running @ Default.

    Intel i7-2600K (L041C107, L048B284, L050A853)
    Asus P8P67 Pro BIOS 1305
    WC setup EK Supreme HF GOLD Edition powered by BlackICE GTX 480
    G.Skill 12800CL7D-4GBECO x2 packs
    WD 10EALX
    Intel X25-M 120GB
    MSI NGTX560Ti Twin Frozer SLI

    Overclock:
    40x100 4Ghz 1.15v [Currently testing L048B284]

Page 4 of 62 FirstFirst 12345671454 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •