Results 1 to 9 of 9

Thread: 939 DFI Lanparty Full Banks Problems

  1. #1
    Xtreme Enthusiast
    Join Date
    Feb 2005
    Location
    T.O.
    Posts
    561

    939 DFI Lanparty Full Banks Problems

    Hello,

    Need a bit of help on one of my friend's systems. He's got the following parts:

    X2 3800+
    DFI LANPARTY UT nf4 Ultra-D
    2 X 1024mb OCZ4002048PFDC-K
    7800GT
    FSP 700 watt psu

    The system runs fine in its current condition. He just recently bought some of the following ram:

    2 X 1024mb OCZ40020487ELDCPE-K

    He can run either the first 2gb's or the 2nd set of 2gb's, but not together for 4gb's. He's tried clearing the CMOS and all that usually happens is that the computer won't boot or it will boot with all 4 dimms in place, but still only show 2gb's.

    Any insight would be greatly appreciated.

    Cheers,

    Jason

  2. #2
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,065
    Try setting it to 2t instead of 1t CPC off instead of enabled in the mem section of the bios(most NF4 boards wouldn't run 1t with all slots filled,some wouldn't even with 2gb of ram as 1gbx2), also try upping the voltage on them justa touch (should b 2.65 volts stock try it at 2.7 or 2.75) make these changes then power off and insert the ram, idk u might have to mix and match them to get them to work with all 4 slots filled, u might also want to try to set the timings to something rather loose at first and tighten from there once u get it 2 boot/working in windows, but try something like 3-3-3-10, set tRFC to 24 and tRC to 10-12, also for this board with that many dimm's u will have to set your Dram Drive Strength (DDS) to 8 the highest setting DDDS u might b able to get away with setting 1 but idk what ic's they use just try 1-3 (depending on his bios he can even have a 4th option)

    These boards can b a PITA till u really learn how 2 tweak them, so many setting (at least back then), but what i have listed should help you out alot, give them a try and get back 2 me

    Dragon

    PS. And here i thought i was the only person in the WORLD still running this board...lol
    Last edited by FireDragon; 12-10-2009 at 04:20 PM.
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide

  3. #3
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,065
    Also what Bios is he using? some of the newer one modded by tony aka Bigtoe boot alot better then other bios (particularly after a flash) but i have noticed alot better booting all around with them (1-2 sec post vs listening to my fans spining up for 5-10 sec with other bios's b4 posting), i like the 704-BT, and im pretty sure u can find them in my bios guide in my sig (if they aren't there look up "dfi NF4 ultra-d bios 704-bt"in google there should b a techpower-up.com link with dfi nf4 ultra/sli-dr bios)

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide

  4. #4
    Xtreme Enthusiast
    Join Date
    Feb 2005
    Location
    T.O.
    Posts
    561
    Thanks! Any recommended BIOS revisions?

  5. #5
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,065
    Yeah look up a post i guess i wasn't fast enough should have just included it in my other post but i wasn't thinking

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide

  6. #6
    Xtreme Addict
    Join Date
    Jan 2008
    Location
    Vancouver,British Columbia, Canada
    Posts
    1,178
    http://www.xtremesystems.org/forums/...i+expert+vista


    A different board but should help anyway


    World Community Grid's mission is to create the world's largest public computing grid to tackle projects that benefit humanity.
    Our success depends upon individuals collectively contributing their unused computer time to change the world for the better.

  7. #7
    Xtreme Member
    Join Date
    Jun 2004
    Location
    China
    Posts
    266
    I'm running MSI K8N Neo2 platinum with athlon 64 x2 3600+ at 266 x 9 ,two 512mb x2 UCCC and two 256mb x2 D43, and memory clock at 218mhz 2.5-3-3-7-12-2T, works fine. When I set CR to 1T system becomes unstable.

  8. #8
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Location
    Stephens City,VA
    Posts
    730
    Try a lower ram divider than ddr400
    Asus Crosshair III
    Phenom X2 550@X4
    Cooler Master V10
    2x2gb G-SKILL DDR3
    ASUS HD 4890 Top
    Antec 850w
    WD 500gb
    WD 80gb

  9. #9
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,065
    imo only try that as a last resort u will lose enough performance going to 2t vs 1t, so try to keep the ram at speed, only try that if what i have listed doesn't work, as your going to have to run 2t, pretty much no matter

    Dragon
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •