The Pentium Dual Core E6300 (45nm) thread

**Leeghoofd** · 07-29-2009, 07:33 AM

Review is up , see sig

Pretty impressed as it is a nice bang for the buck CPU

**~~Zucker2k~~** · 07-31-2009, 09:51 AM

Originally Posted by Leeghoofd

Review is up , see sig

Pretty impressed as it is a nice bang for the buck CPU

Loved your review; tempted to grab one and overclock the hell out of it.

**Leeghoofd** · 07-31-2009, 12:29 PM

thx for the nice comment

Well I'm pretty sure the one we got would do 5.3-5.4 for benching purposes, we put 1.8Vcore in the bios and cooled it under the cascade and let it complete all the runs like that. If we pushed more vcore we could have gotten CPU-Z higher too for sure... but it was just quick fun that afternoon...

**rastaseb** · 07-31-2009, 01:35 PM

plz, can someone post his bios settings with E6300 to hit 4 GHZ ?

**Leeghoofd** · 07-31-2009, 01:38 PM

Which motherboard ? On the Giga EP45 UD3LR it was dead easy

**rastaseb** · 07-31-2009, 10:12 PM

on DFi JR P45... i tried different FSB strap and i think the only one wish rocks i 266. I even can't boot windows with 333 strap

**Leeghoofd** · 07-31-2009, 10:36 PM

I think you need to set TRD setting yourself as it's too tight, try loosening it to 9 eg. Also the Nb GTL value has to be correctly set. If this mobo is anything like the early biosses of the DK, then it's best to create a Mem86 bootcd, it's so easy to corrupt ya windows install when trying to look for Max OC. Which Bios are you currently running ?

**PatRaceTin** · 07-31-2009, 11:47 PM

My friend tell me this little monster can reach FSB 500+

**rastaseb** · 08-01-2009, 01:22 AM

Originally Posted by Leeghoofd

I think you need to set TRD setting yourself as it's too tight, try loosening it to 9 eg. Also the Nb GTL value has to be correctly set. If this mobo is anything like the early biosses of the DK, then it's best to create a Mem86 bootcd, it's so easy to corrupt ya windows install when trying to look for Max OC. Which Bios are you currently running ?

i use the last bios 03/20. i tried to boot at 10*380 with 266 strap and i freezes at post when detecting cpu.

My GTL's are 0.63 / 0.67 for CPU and 0.61 for NB.... probably a bad setting in bios.

My E6300 is a Costa-rica and the batch begins by 9.....

**PatRaceTin** · 08-01-2009, 01:32 AM

here is my friend result

**Leeghoofd** · 08-01-2009, 04:55 AM

Drop multi to eg 8 or so and set 1.35Vcore.... leave CPU GTL's alone, set NB GTL to 0.64ish region, try first 333FSB and work ya way up

**almighty15** · 08-06-2009, 01:03 PM

Hey guys, Got me PCD E6300 100% Linx stable at 4.2Ghz with 1.64Vcore 24/7, Is that a bad clock compared to most?

**WhiteFireDragon** · 08-06-2009, 01:08 PM

that vcore is really high for 24/7. are you on air? how did you manage to use vcore that high and didn't run into the thermal limit using linx?

**almighty15** · 08-06-2009, 01:11 PM

Originally Posted by WhiteFireDragon

that vcore is really high for 24/7. are you on air? how did you manage to use vcore that high and didn't run into the thermal limit using linx?

It's under water

**Leeghoofd** · 08-07-2009, 02:14 AM

The clock is nice, but how do you achieve it ? via 400FSB ? if I was you and if ya mobo can handle it go for 8 x 500, will provide you very good bandwith and really 1.62 volts is far too high for 24/7 even under water.My sample did 4Ghz 1.42vcore... 4.5 at 1.55Vcore

**PatRaceTin** · 08-07-2009, 05:40 AM

hi guys let googling with word "E6500K" you may see new 45nm star!!! (unlock multi)

**almighty15** · 08-07-2009, 10:07 AM

Originally Posted by Leeghoofd

The clock is nice, but how do you achieve it ? via 400FSB ? if I was you and if ya mobo can handle it go for 8 x 500, will provide you very good bandwith and really 1.62 volts is far too high for 24/7 even under water.My sample did 4Ghz 1.42vcore... 4.5 at 1.55Vcore

It's at 1.64 Vcore for a reason

See my thread

http://www.overclock.net/intel-cpus/...ing-final.html

And was your chip 30 runs Linx stable testing all available memory?

**Leeghoofd** · 08-07-2009, 10:24 AM

None of my cpu's are linX stable as I don't even test that, they are folding ,game and bech stable.... under the cascade it was stable at 5.2 no sweat at 1.8vcore :p

I absolutely don't care about IBT... as it has been already been proven a zillion times that it's not THE test. It's overhyped as it produces excessive heat and people think it's a better test then...

and why do you want to prove some myth that has been busted before, if you have a good cpu it will last , if you got a dud one it might degrade in weeks at stock volts lol... mostly you will degrade ya mobo sooner than a well cooled cpu...

For ya little comerades on your forum search for Benchzowners thread on the vcore fsb term thingy. Bill has put several real £OC'ed Wolfdales at +1.5vcore, 1.5vtt;PLL 1.7 for weeks... on air !! none has failed... he lost one mobo in the process as his test was 24/7... your about at least a year too late on this matter....have fun, with it but it's a waste of cycles... even if yours should fail you still haven't proven anything...

**funkflix** · 08-08-2009, 11:42 PM

Bought one yesterday to change out my 6600ES and it is a nice cpu for 65€! Oc is average but much better as with my previous cpu!

Will change the board soon, bcs. have a lot of fsb problems with the old P5B. P5Q-E is on the way!

**Leeghoofd** · 08-09-2009, 02:37 AM

Hope you can stabilise 8 x 500FSB mate and enjoy the extra ram bandwith over the P5B Dlx... I really liked this CPU a lot...

**funkflix** · 08-15-2009, 12:36 AM

It's getting better now!

**vanhoenacker** · 08-16-2009, 09:49 AM

Hello and sorry for my bad english
my E6300 is OCCT stable 1.352V 470MHz x 8.5, it run also 4.2GHz but with about 1.5V and more T°
so 4GHz its good for me

http://www.monsterup.com/image.php?u...0444703624.png ambiant T° : 26°C

**Leeghoofd** · 08-16-2009, 10:00 AM

Originally Posted by almighty15

It's at 1.64 Vcore for a reason

See my thread

http://www.overclock.net/intel-cpus/...ing-final.html

And was your chip 30 runs Linx stable testing all available memory?

So is it dead yet as you claim to have a no post a while ago ? Didn't know a degraded CPU wouldn't allow a mobo not to post,unless it must be seriously damaged, surely as you have more than ample volts to fire her up...If the cpu is down the drain and to back up ya story, you wil need to test another one and for verification send that dead/degraded one to me, I'll test it and try to RMA it for ya...
I would want to post more but I'll get an admin up my a s s;l For starters I haven't seen any daily results, tests,... you can write whatever you want in fact. How on earth can you prove to me you are telling the truth ? Blind faith I have absolutely none, looking at the way this test is conducted (you change variables all the time , let her run on AUTO for a while, then change this, then that,...

have you even measured the Vcore voltage with a Vdimm ? and so on ...

Originally Posted by vanhoenacker

Hello and sorry for my bad english
my E6300 is OCCT stable 1.352V 470MHz x 8.5, it run also 4.2GHz but with about 1.5V and more T°
so 4GHz its good for me

http://www.monsterup.com/image.php?u...0444703624.png

yep better to run a CPU at a sweetspot and keep temps/voltages (electricity bill) under control , no use for them extra 200mhz

**vanhoenacker** · 08-16-2009, 10:06 AM

Originally Posted by Leeghoofd

yep better to run a CPU at a sweetspot and keep temps/voltages (electricity bill) under control , no use for them extra 200mhz

bonsoir la Belgique, ici Lille

yes i'm very happy with 4GHz and ram running 1128MHz (PC8500)
i'have not find diff between 4 and 4.2

**funkflix** · 08-21-2009, 11:40 PM

That is the max for aircooling now. But my 24/7 setting is 4100MHz 1.432V load.

Thread: The Pentium Dual Core E6300 (45nm) thread

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions