Bloodrage new G25 bios

**Lord Trident** · 05-25-2009, 11:09 PM

Patch think the reason for your problem was the VID table were wrong for your cpu and in the old bios its was over voltage your cpu
now you have the new vid table it does not do that now
so you have to increase the voltage to have the same as the old bios.

hope that helps a little

thanks

**saaya** · 05-25-2009, 11:56 PM

welcome to XS patch

try what carl suggested, otherwise, have you tried to enable the current feedback override in cpu features?
might get you higher... but yes, in general you need notably more volts to get c0 chips up... there are some good c0 batches that clock about the same as d0, but even the worst d0 seems to be close to those good c0s, so yes, its def worth going for c0s

oh another thing you can try, disable HT and see if you can get any higher... HT creates quite some extra heat, and c0 chips are way cooling limited, d0 as well, but not as much.

whether its worth upgrading from c0 to d0 is another question... if you can find somebody who will take your c0 for a good price, why not...

DaRoN, good to hear your getting further now

**dragonz1r** · 05-26-2009, 06:28 PM

WOW,

first try, 1866Mhz with my Reapers- @1.65v (actually 1890mhz according to CPUZ)

FINALLY.

Thank you for the updated bios.

I am, however, having troubles oc'ing to my previos level, but I have not played with this bios much.

I do have a request, if requests are ok to post, I would like odd number memory dividers, after all what good is an uncore of 26? Also, how do I lock the FSB to 20? I keep getting a 21 multi with this bios.

Thank you very much for a very nice product, I hope this support continues, as I despise Asus, for one reason- NO tech support. Foxconn would do well to continue products like this one, after all I bought one, and I am very frugal with my cash.

Money well spent.

**dragonz1r** · 05-26-2009, 06:38 PM

One other thing I just noticed- vcore is considerable lower (default) with this bios over the previos versions, now correct- I believe, so I am hoping that if I raise vcore my previos OC will be regained.

**DaRoN** · 05-27-2009, 04:33 AM

What is the thing with PCIe clocks?

**Mescalamba** · 05-27-2009, 05:08 AM

Originally Posted by DaRoN

What is the thing with PCIe clocks?

They believe that it helps reaching higher BCLK.. its quite certain that it helps to get like 5 MHz more..

**r1ch** · 05-29-2009, 04:17 PM

Here we go guys, steps in the right direction

4.8Ghz 920, nearly 229 bclk and 32GB RAM.

http://valid.canardpc.com/show_oc.php?id=576031

Keep the BIOSes coming Carl

**Utnorris** · 05-30-2009, 05:58 PM

Nice r1ch. Looking forward to playing with the bios.

Anyone know the DOS cmd line for the bios update? I.E. awdflash "file".bin /...........

Also, is there liveupdate software for Windows 7? Aegis panel? CD will not let me install anything since it does not recognize Windows 7.

**Lord Trident** · 05-31-2009, 01:21 AM

lol check the .bat file that in the zip
it has the command line you want

have to check win7 to see if the newer version work but that will not be till near the end of next week

**quake6** · 05-31-2009, 01:27 AM

Anything new about completely adjustable PCI-E speed?

**BenchZowner** · 05-31-2009, 01:48 AM

Originally Posted by Utnorris

Nice r1ch. Looking forward to playing with the bios.

Anyone know the DOS cmd line for the bios update? I.E. awdflash "file".bin /...........

Try using the search function ?

http://www.xtremesystems.org/forums/...70&postcount=8

**Sch0cK** · 05-31-2009, 02:01 AM

If i have an USB-HD connected (Storage, no Sys.) i can not Boot at Least not with OC.

I was wondering what was going on bec. these where proved 24/7 settings.

**Utnorris** · 05-31-2009, 05:34 AM

Originally Posted by BenchZowner

Try using the search function ?

http://www.xtremesystems.org/forums/...70&postcount=8

Sorry, I went to the stickies and it wasn't listed there, so I thought I would just ask.

Thanks for the education and the post.

**saaya** · 05-31-2009, 07:16 AM

Originally Posted by Sch0cK

If i have an USB-HD connected (Storage, no Sys.) i can not Boot at Least not with OC.

I was wondering what was going on bec. these where proved 24/7 settings.

yeah i heard that before, try unplugging it and plugging it again, that worked for the guy who told me about it...

**DaKon** · 05-31-2009, 10:13 AM

Originally Posted by Lord Trident

this may help some people
set QPI DRIVE strength 10-25 and the QPI latency to 100.
It will help you to get more FSB.

before you ask no i dont know got this from the engineers so give it a try

have fun
thanks

Clarification on this. Do you mean the following:

Added BIOS setup control item "CPU QPI Latency". ---->set this to 100
Added BIOS setup control item "IOH QPI Latency". ----> set this to 100
Added BIOS setup control item "CPU QPI Drive Strength". ----> set this to 10-25
Added BIOS setup control item "IOH QPI Drive Strength ----> set this to 10-25

Thank you

**Lord Trident** · 05-31-2009, 01:33 PM

think its only the cpu ones you want to play with but try the other you may get more out
that the fun of learning

**mattkosem** · 05-31-2009, 09:40 PM

Anyone break 230 yet? Bumping the PCI-E to 102 made me stable up to 224 and not a step further. I'll play with these drive strengths and latencies next.

--Matt

Edit: no improvement in max bclk with the latency and drive strength mods. 224 might be a bit more stable with them though. http://valid.canardpc.com/show_oc.php?id=577613

**Utnorris** · 05-31-2009, 10:06 PM

Other than Benchzowner, I think 229BCLK is the highest. I am planning on installing the new bios this week and play with it on my days off.

**r1ch** · 06-02-2009, 02:44 PM

Originally Posted by Utnorris

Other than Benchzowner, I think 229BCLK is the highest. I am planning on installing the new bios this week and play with it on my days off.

Fingers crossed for some more testing and higher bclk this week guys

Has Bill found the results off his hard drives yet?

**DJSUB** · 06-02-2009, 03:41 PM

@ r1ch

can you please share your bios settings so we would know which settings to play

thanks!

**r1ch** · 06-02-2009, 05:54 PM

Originally Posted by DJSUB

@ r1ch

can you please share your bios settings so we would know which settings to play

thanks!

Benching a 975 tonight, but when I put the 920 back in I'll grab the settings for you.

To be fair, it's the PCI-E frequency to 103.4Mhz that opens up the clocks past 220bclk. Here's hoping for a fuller PCI-E frequency range in the next BIOS

**Mescalamba** · 06-03-2009, 05:10 AM

What is possible PCI-E range set up? 100 - 103? I would like to see something like 50-150.

Tough.. not sure whats operating range of PCI-E.

**mattkosem** · 06-06-2009, 03:32 PM

Originally Posted by Mescalamba

What is possible PCI-E range set up? 100 - 103? I would like to see something like 50-150.

Tough.. not sure whats operating range of PCI-E.

I can't get mine stable past 103mhz. With spread spectrum off I can only reach 102mhz. 103 seems to be good for 227 though. I can't get anything at 228.

--Matt

**Lord Trident** · 06-07-2009, 12:41 AM

you have to use setfsb to go above 102
the bios can only do 102 at the moment

**lysyn123** · 06-09-2009, 06:21 AM

Link to the BIOS does not work. Please give me a different link.

Thread: Bloodrage new G25 bios

Thread Tools

Search Thread

Rate This Thread

Display

G25 bliss- Reapers now WORK!!!!!!!

Bookmarks

Bookmarks

Posting Permissions