Here are some temps from the EK blocks at idle for now.Install was pretty basic and blocks are very nicely made.
Here are some temps from the EK blocks at idle for now.Install was pretty basic and blocks are very nicely made.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
That is nice, can you post load temps as well? In the past some of their blocks have had issues with high VRM temps..
Anyway I have my EK 5870 nickle block lying right here, just didn't get around to installing it yet.
I will try and get load temps later on. I need to let it run for a bit to get rest of bubbles out.
Xigmatek Elysium Case
Intel I7-3770K
Asus Sabertooth Z77
16 Gigs Ripjaws 2133mhz Ram
Mushkin 240 SSD
Lightscribe Dvd Burners
EVGA GTX 680
Aquacomputer Gpu Block
Cooler Master Hybrid 1050 Watt Pws
EK Supremacy Cpu Block
Xspc RX360 Rad
Xspc XS360 Rad
Phobya 250 Balancer Res
2 x Mcp 350 Pumps
Nice temps. Btw, can you post some photos of the blocks with the cards in your casing?I'd like to get an idea how they look like (been searching for some real photos with no luck).
Intel Inside
Looks similar to the temps I get on my 5870 with EK block, being cooled by a PA120.2 on it's own. My load temps for the GPUs didn't get above 40C on full load using FurMark, though one of the VRM touch 50C. If I can get my camera working again I'll take a quick pic...
Posting Permissions
Reply With Quote
Bookmarks