The beep was (I put one ram in red slot), but now it shows 7F?
The beep was (I put one ram in red slot), but now it shows 7F?
Hi,
I have not been active for a long time no so please tell me the best bios to put in for a i7 980x?
..and are this board still one of the best?
i7 2600k @ 4.5GHz, 1.29V
Asus Maximus IV Extreme-Z (bios 0706)
8GB Ceil Corsa 2133MHz cl9
Asus GTX580
2x OCZ ve3 120Gb Max Iops (Raid0)
1x WD Black 1Tb
Asus Xonar Essence STX
NEC 24WMGX3
Corsair AX1200W
Lian-Li P80 A.S
Latest version (56), I'd assume. It contains the critical hotfix microcode.
Hi
980X@4.5 Prime 1R OK
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
Ya it doesn't seem that difficult. Only pictures I can find are here
http://kingpincooling.com/forum/showthread.php?t=599
But they aren't actual pictures of the board.
LinX 1.445V
http://blue.ap.teacup.com/kazukun/img/1271546636.jpg
OCCT Linpack 1.399V
http://blue.ap.teacup.com/kazukun/img/1271545964.jpg
I am a Japanese PC creator
http://blue.ap.teacup.com/kazukun/71.html
There we go:
Classy 759 BIOS 51
Hi
LinX
@4563.9MHz 1.435V(BIOS1.375V) 6C/12T Ok
Nice kazukun what kind of cooling? Can't wait till I get my 980x on Friday.
water-cooled
CPU: EK-Supreme - Acetal
VRM.IOH.ICH: EK-FB EVGA X58 CLASSIFIED
MagiCool XTREME NOVA 1080 ( 9 X 120mm) Radiator (Fan 12cm500rpm*9)
KOOLANCE PMP-450
http://blue.ap.teacup.com/kazukun/74.html
Prime95 doesn't cut it anymore?? 50 passes of Linx stable, but not 8 hour prime stable... seems to happen all the time.
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
Mind if I join this thread XD
Anyone has i7 980 in EVGA Classified 4 way SLI (E762)?
Mine didn't scale so well in terms of vcore/frequency beyond 4.2Ghz...
I can get my 980x 16 copies of 32M PI Stable with 1.24375v @ 200x20, uncore was running 4000Mhz while dram was running 1600Mhz CAS 7 (EVGA didn't allow me to adjust uncore ratio below x2 of dram frequency...)
and 4.2Ghz was proven stable as well with 1.275v BIOS. However any frequency above that will require a huge pump of vCore voltage to keep stable but I didn't see such issues in other X58 motherboards
I was suspecting if this is the motherboard BIOS issue or what..can anyone help to test?
My i7 980x batch is 3003B466.
Last edited by ci2kla; 04-22-2010 at 07:53 AM.
Intel XEON X5650 B1 Retail x2 3012A692
EVGA Classified SR-2 BIOS A50
Crucial Ballistix PC3-1333 CL6 D9GTR 2G Kit (Active)
Crucial Ballistix PC3-2000 CL9 D9GTS 2G Kit (Active)
Thermaltake V1R (in use, without heatpipe)
Cooler Master Silent Pro M 1000W PSU
Galaxy GTX 275 (Digital PWM)
WD 10EALX
Overclock:
Currently running @ Default.
Intel i7-2600K (L041C107, L048B284, L050A853)
Asus P8P67 Pro BIOS 1305
WC setup EK Supreme HF GOLD Edition powered by BlackICE GTX 480
G.Skill 12800CL7D-4GBECO x2 packs
WD 10EALX
Intel X25-M 120GB
MSI NGTX560Ti Twin Frozer SLI
Overclock:
40x100 4Ghz 1.15v [Currently testing L048B284]
need more V core
I have same batch, 1.39 to get 4.5Ghz, and it seems to be better than most VTT seems to be very needy to.. it will run 2200Mhz RAM, stable, but way to high VTT, just for 2000Mhz I need 1.4V VTT
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
I have had it happen to a lot of CPU's not just the 980x's
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
Hi, I have a pretty specific question regarding this board regarding an SLI system and a Corsair HX1000W. Do you guys with similar set-ups run the second 12V ATX connector and if you do how do you guys set up the rails for the modular connections?
[ 2010 Rig - Fermi ][ Intel Core i7 930 - Batch 3938B269 4.2 GHz @ 1.275V - ][ eVGA X58 Classified E760 ][ G.Skill (3 x 2GB) DDR3 1600 SDRAM ][ 2x Gigabyte GTX480 SLI - 825MHz/1650MHz/3933MHz - ][ 2x Western Digital Black 640 GB RAID 0 ][ Corsair HX1000W PSU ][ Windows 7 Professional x64 ] - [ Watercooled ][ Swiftech Apogee XT ][ HW Labs Black Ice Stealth GT360 Push/Pull ][ Swiftech MCP655 Pump ]
"There are two possible outcomes: if the result confirms the hypothesis, then you've made a measurement. If the result is contrary to the hypothesis, then you've made a discovery." - Enrico Fermi
Guys is 1.30v IOH too high or too low for a gtx 295 quad sli setup?
I just measure my voltage with a mutlimeter and that is actual volts eleet is reading the same
Please advice
Asus RIVE Bios 2003
3930k 4.5 ghz @1.29v
G-SKILLS 32gig ddr-1600 ripjaws Z
Enermax Evo Galaxy 1250W
2x EVGA GTX 480 Superclocked SLI @ 900/1800/2000
X-Fi Fatal1ty Titanium PCI-E
4 x crucial Realssd C300 256 Raid 0
Areca 1880i
Seagate 1TB
CM HAF 932
On water:
HK 3.0
2x MCP655
FESER X360
Blackice GTX 480
DD-GTX 480 VGA blocks
DD Reservoir
Windows 7 64bit
Dell 3008WFP 30"
Help Save Lives Join World Community Grid!
I just picked up my E760 from a fellow member here in the "classifieds"... (brand new return from RMA) just this week and I'm also new to the 1366 platform coming from socket 1156. I've got a nice batch 920 (3938B010) and will most likely run my rig with a low voltage overclock ~4.0GHz for a "crunching" 24/7 setup. I've done some testing at 21x200 and 19x~210 but I seem to be having some bclk issues at around 209. I most likely need more voltages. Can any one give me some VTT and IOH voltage ranges to work with for bclk in the 210 to 220/225 range. I'd like to bench the chip at 215x19 and then 215x21 and providing that I'm successful... perhaps even push on from there.
Note: I'm running with vdroop enabled on air with a Noctua and two medium speed fans in push/pull. These are just short stability runs I'm just starting to test the chip.
Low voltage O.C. load:
Low voltage O.C. idle:
200x21 load:
200x21 idle:
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
Bookmarks