Page 48 of 106 FirstFirst ... 38454647484950515898 ... LastLast
Results 1,176 to 1,200 of 2641

Thread: UnOfficial EVGA X58 Classified Owners Thread

  1. #1176
    Xtreme Addict
    Join Date
    May 2008
    Location
    Vancouver, BC, Canada
    Posts
    1,418
    Quote Originally Posted by JacobF View Post
    79.99. It's in stock now:

    http://www.evga.com/articles/00521/
    Are these going to be sold through your official resellers, like NCIX?

  2. #1177
    Xtreme Supporter
    Join Date
    Jan 2008
    Location
    USA
    Posts
    654
    Quote Originally Posted by JacobF View Post
    79.99. It's in stock now:

    http://www.evga.com/articles/00521/
    Nice. Someone needs to write up a review on this and post it in the forum.

  3. #1178
    Registered User
    Join Date
    Oct 2009
    Posts
    6
    hey guys, can you help me with my 760 please? It gets stucked at FF inmediatly when I turn on
    This started to happen today when I accidentally decreased the cpu vtt voltage to sth like 1.14 or 1.08 in e-leet, giving me a bsod and a quick reset. Since that, the motherboard won't post more..
    What can I do? I've already tried to boot with single channel memory changing slots and without any kind of drives or peripherials. I'm a bit disappointed because this mobo cost me like 600 bucks here in uruguay..
    Any kind of help is welcome Thanks, Rodrigo.

  4. #1179
    Xtreme Member
    Join Date
    Mar 2007
    Posts
    203

    Try a cmos reset

    Quote Originally Posted by xGTx View Post
    hey guys, can you help me with my 760 please? It gets stucked at FF inmediatly when I turn on
    This started to happen today when I accidentally decreased the cpu vtt voltage to sth like 1.14 or 1.08 in e-leet, giving me a bsod and a quick reset. Since that, the motherboard won't post more..
    What can I do? I've already tried to boot with single channel memory changing slots and without any kind of drives or peripherials. I'm a bit disappointed because this mobo cost me like 600 bucks here in uruguay..
    Any kind of help is welcome Thanks, Rodrigo.

    Have you tried a cmos reset?
    Motherboard: EVGA Classified 759
    CPU: Intel 920 D0 2.66 @ 3.8ghz
    Ram: 6gb 1600 DDR3 7-7-7-20 Corsair Dominators
    PSU: PC Power Cooling 1200 ESA
    Audio: SB X-Fi Titanium
    Video: Trifire XFX 6970
    Harddrives: WD3000HLFSx2+ OCZ 120G Vertex SSD
    Cooling: HK 3.0 - XPSC360 Rad - MCP655 pump

  5. #1180
    Registered User
    Join Date
    Oct 2009
    Posts
    6
    Quote Originally Posted by davidm71 View Post
    Have you tried a cmos reset?
    yes, with the panel button and also removing the cmos for like 1 hour and putting it on again
    oh, I also forgot to post my specs:

    I7 920 d0 3931A
    Classified 760 a1
    3x2 g.skill trident ddr3 2000 mhz
    9800gtx
    thermaltake toughpower 850w modular
    Last edited by xGTx; 12-16-2009 at 07:16 PM.

  6. #1181
    Xtreme Member
    Join Date
    Mar 2007
    Posts
    203

    Try this ...

    Quote Originally Posted by xGTx View Post
    yes, with the panel button and also removing the cmos for like 1 hour and putting it on again
    oh, I also forgot to post my specs:

    I7 920 d0 3931A
    Classified 760 a1
    3x2 g.skill trident ddr3 2000 mhz
    9800gtx
    thermaltake toughpower 850w modular
    I would try swapping your psu. This may be a psu compatibility problem. Could be just coincidence to the setting change which shouldn't have done any harm. Are you sure your psu is on the Classified compatibility list?

    If that not the case it could be any one of your components. I had a bad hard drive stall the post process once. So if any of your parts are bad that could effect the post. Only way to figure it out is by a process of elimination. That includes the video card, and cpu. Also I am very familiar with the psu problem these boards have and to me it reminds me of what I went through.

    Do you have a spare psu?
    Motherboard: EVGA Classified 759
    CPU: Intel 920 D0 2.66 @ 3.8ghz
    Ram: 6gb 1600 DDR3 7-7-7-20 Corsair Dominators
    PSU: PC Power Cooling 1200 ESA
    Audio: SB X-Fi Titanium
    Video: Trifire XFX 6970
    Harddrives: WD3000HLFSx2+ OCZ 120G Vertex SSD
    Cooling: HK 3.0 - XPSC360 Rad - MCP655 pump

  7. #1182
    Registered User
    Join Date
    Oct 2009
    Posts
    6
    Quote Originally Posted by davidm71 View Post
    I would try swapping your psu. This may be a psu compatibility problem. Could be just coincidence to the setting change which shouldn't have done any harm. Are you sure your psu is on the Classified compatibility list?

    If that not the case it could be any one of your components. I had a bad hard drive stall the post process once. So if any of your parts are bad that could effect the post. Only way to figure it out is by a process of elimination. That includes the video card, and cpu. Also I am very familiar with the psu problem these boards have and to me it reminds me of what I went through.

    Do you have a spare psu?
    mmmh I had an antec tp new 650w but I had to sell it 2 weeks ago
    but... I don't think the psu is the problem cuz anything was working fine before that problem with cpu vtt down voltaging in e-leet
    Last edited by xGTx; 12-16-2009 at 07:31 PM.

  8. #1183
    EVGA Enthusiast
    Join Date
    Dec 2005
    Location
    Brea, California
    Posts
    281
    Quote Originally Posted by dejanh View Post
    Are these going to be sold through your official resellers, like NCIX?
    Yes.
    . ss phase . nf11fx compressor . chilly1 evap . r507 . chilly1 condenser . freezepack controller .
    965xe 4.63ghz || evga x58 classified || 2x evga gtx 295 || 6gb g.skill 1.6ghz cl8 || corsair ssd x64 || tt 1.2kw w/ 12 awg || win7 x64

  9. #1184
    Xtremely Addicted
    Join Date
    Dec 2004
    Location
    NL
    Posts
    2,479
    Hope it hits retail in EU soon, looking forward to using 1

    Fast bclk test on E762, cpu on SS. Like the board a lot




  10. #1185
    Xtreme Enthusiast
    Join Date
    Mar 2008
    Location
    Wherever I may roam
    Posts
    678
    Nice results Bart!! My board showed up but had not time to test as I'm trapped offshore KSA till FEB!!! (almost thought of taking it with me!!) ARRGGGHHH!! Does the board run hot?? Does that little fan help or would a WB be of use?? Keep hammering it and looking forward to some COLDER results!!
    ____________________________________________

    More & more very expensive, quickly obsolete parts!!

  11. #1186
    I am Xtreme
    Join Date
    Oct 2004
    Location
    U.S.A.
    Posts
    4,744
    Quote Originally Posted by JacobF View Post
    79.99. It's in stock now:

    http://www.evga.com/articles/00521/
    Does this show the POST codes as the system is booting?


    Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card

    LSI series raid controller
    SSDs: Crucial C300 256GB
    Standard drives: Seagate ST32000641AS & WD 1TB black
    OSes: Linux and Windows x64

  12. #1187
    StimulatedBoy
    Guest
    Quote Originally Posted by ChaosAD View Post
    I see many of you are running the classified with the intel G2 ssd. Anyone of you have/had any issues running the ssd in AHCI mode? I tried installing win 7 x64 a couple of times, all of them whenever i turned off the pc next reboot i had disk boot failure. I could see the drive in bios but i couldnt boot OS. I tried IDE and it works perfect, but since i saw some performance decrease i would like to know if there is a solution to this.
    Been running Win7 x64 Ultimate on Intel X25-M 160 GB G2 for some weeks now and not had any problems what so ever. installed OS in ACHI mode but forgot to change from IDE to ACHI after flashing BIOS a couple of times, which of course resulted in no boot / immediate BSODs. So, must be set to ACHI in BIOS or you will experience what you're describing.

    Hope you figure it out!

  13. #1188
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    172
    well, add me to the list, I got me a beautiful E760 Classified 2 days ago and have so far got 4.2ghz @ 1.375v (in the bios, not actual) with HT on and using "with vdroop" settings on my i7-920 rock solid stable... Haven't had a chance to shoot for any higher yet, but my temps never get above 61*C on OCCT for an hour and prime95 for 6hrs, so I think i still have some head room.
    Last edited by Badfastbusa; 12-17-2009 at 08:26 AM.
    CPU------------i7-930 @ 4.8ghz (on watta)
    Motherboard------EVGA Classified E760 (bios: 44)
    Memory---------- 3x2gb G.Skill Trident 2005mhz 9-9-9-24-72-1T
    Graphics Card-----XFX 5870 1081mhz/1274mhz
    Hard Drive--------OCZ Vertex 60gb SSD, Seagate cuda 500gb
    Sound------- Auzen Forte/Audio Technica AD700's
    Power Supply-----Corsair 850TX
    Case-------------Antec 1200
    CPU cooling-----HK 3.0 - BI GTX480 - 8x San Ace 120 w/Shrouds - MCP 355 with XSPC Top
    OS---------------Win7 64bit Ultimate
    Monitor-----------24" Acer and 20" Acer

  14. #1189
    Xtreme Member
    Join Date
    Apr 2004
    Location
    Estonia, Mafia land.
    Posts
    369
    Hi guys, I need some help.
    Got my EVGA Classified E760 yesterday and started to bench straight away. Though my bad luck I had no antifreeze and my water froze outside at -13c. So I took the PC back indoors and im trying to figure out how to get over 222bclk 3D stable. Is it that the cpu ran over 89c or is it smth else? CPU and VGA is watercooled. Had 3x Volcano 12 fans blowing on the motherboard and memory so that wasnt the problem.

    What exact voltages to try? I read like 30 pages of posts here so I know something but right now im thinking its the temperatures.. though im not sure. Also HT on i was not able to go above 230bclk but on my modded gigabyte I can run superpi with HT on easy on 235blck. So whats keeping me back? Are there any special bioses i should try?
    Follow me @ www.youtube.com/user/HousedanceTanL

    • Intelฎ Core i7 920 2,66GHz "SLBEJ 3912B351" D0 - OC 5.11GHz 1.525v
    • ATI Radeon HD5970 XFX Black Edition 2Gb GDDR5 (Max OC ..\..)
    • 12Gb 2x6Gb 3x2Gb A-Data PC12800 DDR3 1882MHz CAS 7-6-6-16 1T 2.2v
    • Gigabyte X58-Expert SLI\CF with BCLK MOD! 240MHz
    • 1050W Enermax Revolution
    • 3Tb 3x1Tb RAID 0 Samsung F3 HD103SJ 7200rpm, 32Mb, Sata II
    • Monitor Samsung 52" LE-52A567P2W (2008.a) - 1920x1080p FullHD
    • Silverstone Raven II + 1x120mm fan@5v and 3x180mm fan@7v


    3DMark 2001 - 100,001p
    3DMark 2003 - 110,000p
    3DMark 2005 - 40,000p
    3DMark 2006 - 30,337p

  15. #1190
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    8,829
    Can anyone give me a hand with my fan control issue, please?
    Check this thread and reply there.
    Basically, looking for a way to control my 3 pin fans via voltage (or whatever else that works! I suppose the default BIOS option is PWM, and it doesn't seem to work).
    Your input would be greatly appreciated! Thanks!
    Last edited by zalbard; 12-19-2009 at 07:45 AM.
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  16. #1191
    Registered User
    Join Date
    Nov 2006
    Posts
    5
    I received my new board today a x58 classified 760-E1. The bios is 6.00 pg. Can someone tell me what's the date of this bios? cpuz shows 30/10/2009!!! Can that de true or is it an older one?

  17. #1192
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    8,829
    Quote Originally Posted by eshati View Post
    I received my new board today a x58 classified 760-E1. The bios is 6.00 pg. Can someone tell me what's the date of this bios? cpuz shows 30/10/2009!!! Can that de true or is it an older one?
    6.00 is the type, not the version.
    And for the BIOS link... check here.
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  18. #1193
    Registered User
    Join Date
    Nov 2006
    Posts
    5
    Quote Originally Posted by zalbard View Post
    6.00 is the type, not the version.
    And for the BIOS link... check here.
    Well thanks buddy! My qwestion was about the date.

  19. #1194
    Registered User
    Join Date
    Jul 2009
    Posts
    81
    Can someone recommend me 12GB's of good RAM with low CAS and can overclock to +4.0Ghz?

    Thanks!

  20. #1195
    Registered User
    Join Date
    Nov 2006
    Posts
    5
    Strange problem with my 760 E1. It is giving me constant wistling and when I run 3d application it gets worst. It cuts my sound and my monitor starts to flicer. Changed cards the same. Any ideas???

    specs
    920 D0
    gt dominator 6gb 2000mhz
    gtx285 x2 sli
    x-fi extreme music
    enermax galaxy 1000
    agility ex 60g
    Last edited by eshati; 12-21-2009 at 08:10 AM.

  21. #1196
    Xtreme Addict
    Join Date
    May 2005
    Location
    Fayetteville, North Carolina.
    Posts
    1,476
    Quote Originally Posted by Badfastbusa View Post
    well, add me to the list, I got me a beautiful E760 Classified 2 days ago and have so far got 4.2ghz @ 1.375v (in the bios, not actual) with HT on and using "with vdroop" settings on my i7-920 rock solid stable... Haven't had a chance to shoot for any higher yet, but my temps never get above 61*C on OCCT for an hour and prime95 for 6hrs, so I think i still have some head room.
    1.375v with HT on Air Cooled and max of 61c loaded? is your pc in a freezer. Good water cooling would love to have temps that low with HT on and almost 1.4v.
    Last edited by nugzo; 12-20-2009 at 10:30 AM.
    Gigabyte Z68X UD7
    Intel Core i7 2600K (testing)
    16GB Mushkin Redline 17000 2133 1.65v
    EK, 3x120 Rad 2xMCP655
    Acer 1200w PSU
    2-128GB Samsung SSD RAID 0
    2-1TB Seagete 32mb RAID 0
    1-1TB Western Digital
    1- Plextor PX-B320SA Blue Ray
    1- Plextor PX-880SA 24x DVD/RW
    2- EVGA Nvidia GTX-480 SLI
    LG 30", Hanns G 28"

  22. #1197
    Xtreme Enthusiast
    Join Date
    Dec 2007
    Location
    Beneath The Remains, Greece
    Posts
    721
    Lol i also think its impossible to get 61C with these specs. Pics or it didnt happen
    Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W


    WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250

    Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500


  23. #1198
    Xtreme Enthusiast TJ TRICHEESE's Avatar
    Join Date
    May 2009
    Posts
    784
    Aparantly these boards run stupidly hot and why didnt they make the 7x pcie one normal size??

  24. #1199
    Xtreme Member
    Join Date
    Oct 2007
    Posts
    275
    Quote Originally Posted by ShadowFox19 View Post
    Can someone recommend me 12GB's of good RAM with low CAS and can overclock to +4.0Ghz?

    Thanks!
    I had some of the Kingston 4 x 3GB PC3-1600 on my Biostar X58 board. This stuff worked well, but price was kinda high, as most 12GB kits are.

  25. #1200
    Xtreme Addict
    Join Date
    May 2005
    Location
    Fayetteville, North Carolina.
    Posts
    1,476
    Quote Originally Posted by ChaosAD View Post
    Lol i also think its impossible to get 61C with these specs. Pics or it didnt happen
    If pics are shown, it means they are fake.
    Gigabyte Z68X UD7
    Intel Core i7 2600K (testing)
    16GB Mushkin Redline 17000 2133 1.65v
    EK, 3x120 Rad 2xMCP655
    Acer 1200w PSU
    2-128GB Samsung SSD RAID 0
    2-1TB Seagete 32mb RAID 0
    1-1TB Western Digital
    1- Plextor PX-B320SA Blue Ray
    1- Plextor PX-880SA 24x DVD/RW
    2- EVGA Nvidia GTX-480 SLI
    LG 30", Hanns G 28"

Page 48 of 106 FirstFirst ... 38454647484950515898 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •