The case is smaller and smaller :
right to left : Original case, First resized version, current project, TJ-07
The case is smaller and smaller :
right to left : Original case, First resized version, current project, TJ-07
New rendering (aproching build phase)
Top cut pattern :
Build will start soon.
Friday : command of a 5083 or 5086 aluminium sheet : 2000 mm x 1000 mm x 3 mm or 4 mm.
I hesitate beetween 3 and 4 mm.
The hard part will be to bent it. I think it must be done by a professionnal.
Aluminium sheet arrived but case designed not complete
Look improved but diifcult to make :
Sketch progression :
I have never been a fan of rads mounted on the bottom sucking air in trhough the bottom.
reason for that is dust.
even with filters its dificult to change filters with fans on bottom mount cases.
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein)
Good point. Perhaps a large filter sliding under the case.
Good job so far. You put a lot of work into this! And I like the purple case you had there before. As for your latest sketch, have you thought about allowing an option for the rad to be sitting on its side and using side panel vents (ala TJ-07/Lian Li V2000 bottom rad style)?
Last edited by Beriphent; 10-31-2011 at 08:17 PM.
nice case pretty creative with the heater core, bad paint job IMHO
I share you point of view => to do listGood point. Perhaps a large filter sliding under the case.
I want to have simple and efficient air flow and the smallest case possible (with 2*480Good job so far. You put a lot of work into this! And I like the purple case you had there before. As for your latest sketch, have you thought about allowing an option for the rad to be sitting on its side and using side panel vents (ala TJ-07/Lian Li V2000 bottom rad style)?).
With other designs the case have to be bigger or not practical.
You don't like the color ?nice case pretty creative with the heater core, bad paint job IMHO
Last edited by Makymaco; 01-15-2012 at 10:37 AM.
awesome design and awesome idea for the side panel. I like it a lot!Originally Posted by Makymaco
I'll follow this worklog
Gear: i7 2600K - Maximus IV Extreme-Z - 16GB Corsair Vengeance 1600MHz - EVGA GTX 570 Super Clocked - Crucial M4 256GB SSD - WD Caviar Blue 1TB - Silverstone TJ07-BW - Bitfenix Alchemy Sleeving
Cooling: EK Supreme HF Nickel/Acetal - EK-FC580 GTX+ Nickel/Acetal EN - EK-FC580 GTX Backplate Black - EK Multioption RES X2 Advanced - EK CoolStream RAD XT 360 - EK CoolStream RAD XT 240 - Alphacool VPP655 - EK-D5 X-Top Rev.2 - Primochill PrimoFlex White Tubing - EK-PSC Compression Fittings Black
The build will not start soon, i am working in my new house.
I have done a micro ATX attempt :
Two loops => One loop with one reservoir.
The aquaero pro => Aquaero LT
Case is smaller : 50 cm x 50 cm x 28 cm
Last edited by Makymaco; 02-13-2012 at 02:19 PM.
Hmm, orage-red and blue .. imho this combo ain't best possible.
White blue version (fast drawing) :
With white .. how about insides white aswell?
White is too dirtying, what about red tubing and lights :
I asked professionnals to bend my aluminium sheet but it's pricy (i am not confortable to do it myself) and i have a
lot of work in my house so i abandon this project.
I always wanted to have a TJ 07 and after reflection and a little sketchup, i think i can mount 2 360 rads internaly
in an inverted ATX modded tj07 with a micro ATX board.
I bought :
- tj 07
- asus gene-z
- 2600k
I will start another thread for my new build.
I will post my last sketchup of this project if it can inspire other peoples.
PS1 : I have to sell my aluminium sheet : 2000x1000x4 mm (if french peoples interested pm me).
PS2 : Sorry for my english
Posting Permissions
Reply With Quote
