Page 1 of 5 1234 ... LastLast
Results 1 to 25 of 123

Thread: you know how i do...920 D0 + EVGA Classified = sub 7 min 32M + 100% OC

  1. #1
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656

    you know how i do...920 D0 + EVGA Classified = sub 7 min 32M + 100% OC

    i'll let the other guys shoot the moon on BCLK, i am just interested in one thing and one thing only...those of you that know me know what i am talking about.

    here is the setup:
    • Intel i7 920 D0 - 3845B026
    • MMouse Rev3 CU pot w/LN2
    • EVGA X58 3X SLI Classified - Stock cooling
    • Corsair Dominator-GT 3x2GB PC3-1866 7-8-7
    • ATI Mach64 PCI
    • Corsair HX1000W
    • 3 x Ultra Kaze 2000RPM


    start with the updates then the old stuff...mmm, 5.3GHz 32M 920
    Quote Originally Posted by 3oh6 View Post
    and what a weekend it was. i didn't get a chance to do a whole lot of benching but i did show the lads there my latest with this crazy little 920. nothing like 5.3GHz 32M with a 920



    it is just too bad my 975 wasn't as good as this multiplier challenged 920.
    first off is my max validation, but like i said, it wasn't my main concern. i simply wanted 250BCLK and pretty much quit when i got it.

    http://valid.canardpc.com/show_oc.php?id=557386



    then i toyed with a little 1M action...



    and finally had a couple cracks at 32M. i was checking for max clocks and not pushing memory so there is still room for improvement but after only just cracking 7 mins with my 965 not to long ago, crushing that time with a 920 was quite fun.



    then my time was up and i had to head back to the hospital again for another shot in the chest. the good news there is that i should be healthy again in a few days...no thanks to you Chris, although it turns out you weren't completely to blame

    ***update with results from post on third page***
    Quote Originally Posted by 3oh6 View Post
    oh, and just so you guys don't waste your time...cold on the north bridge doesn't help BCLK



    sure feels badass with the NB at -40C though

    updated CPU-Z @ 5320MHz - 253BCLK...100% overclock if i am not mistaken

    and a quick update on 32M as well with one higher BCLK. played with voltages for 10 minutes and got 1 more BCLK consistently stable for CPU-Z, 1M, and 32M.



    haha, best part is the HWBot points

    another update with 06 at almost 5.2GHz...

    Quote Originally Posted by 3oh6 View Post
    i try to ignore you as best i can Ron, but i would never snub you

    10K looks like it is 5 miles away at this point, but i did get the GTX 295 running with high CPU clocks and squeezed a pinch more out of the CPU. i had a 5200MHz + run down to deep freeze when i got a reboot 3/4 of the way through

    either way, this is the best 06 i've managed so far...



    now nap time...
    Last edited by 3oh6; 06-11-2009 at 12:09 PM.

  2. #2
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,084
    wow very impressive stuff, IOH pll @ 1.5? lower than stock?
    What did you use for max mem. I bet you have sub 6.50 in ya
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  3. #3
    Xtreme Enthusiast
    Join Date
    Jun 2006
    Location
    COLORADOOOOO
    Posts
    540
    <------ says it all!!!!! good job!!

    cannot wait for a D0 in my neck of the woods..

  4. #4
    Xtreme Enthusiast
    Join Date
    Dec 2007
    Location
    Croatia
    Posts
    750
    Classified + D0 are kicking asses just like you with 32M. Expecting some serious tweaking next time

    Nice job


    MBO Gigabyte P67-UD4-B3 // CPU Intel i5 2500k //
    GPU Gigabyte GTX470 // PSU Corsair TX650W //
    RAM 2*2GB Geil Black Dragon + 2*2GB Corsair DominatorGT // HDD WD 640GB + Seagate 250GB (410AS)

  5. #5
    Banned
    Join Date
    Oct 2006
    Location
    Haslett, MI
    Posts
    2,221
    252 BCLK, and you weren't even trying? I'm going to start collecting cans, I need that board.

  6. #6
    Xtreme Member
    Join Date
    Aug 2007
    Location
    UK
    Posts
    247
    Nice time man well done Look forward to you pushing further some good clock coming from these boards

  7. #7
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,193
    hey Jody , thx for posting

    once again great work

    keep recovering it

  8. #8
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    thanks guys, and yup, this board is just that easy with the right CPU.

    Quote Originally Posted by Oliver View Post
    keep recovering it
    thanks boss...after last night, i am well on my way to being back to 100% very soon

  9. #9
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Germany/Bavaria
    Posts
    464
    Good choice of benchmarks, very good choice.

    Congrats!
    The Initial value finished
    ...
    PI calculation is done!


    Quote Originally Posted by Zeus View Post
    Software tweaks are not for sale.

  10. #10
    Xtreme Member
    Join Date
    Jan 2009
    Location
    Torrance, CA
    Posts
    381
    Quote Originally Posted by 3oh6 View Post
    i simply wanted 250BCLK and pretty much quit when i got it.
    Fantastic job!

    LN2 ?
    the Borg Cube:
    Case - Lian Li PC-343B
    Mobo - EVGA X58 Classified (759)
    CPU - i7 920 (D0 stepping), watercooled w/Enzotech Luna Rev.A block
    RAM - Corsair Dominator GT 2000 (8-8-8-24) w/fan
    GPU - EVGA GTX295 quad-SLI, water cooled w/Koolance NX295 blocks
    PSU - Corsair HX1000
    O/S - Windows 7 RC build 7127

  11. #11
    Champion
    Join Date
    Nov 2004
    Location
    Hungary
    Posts
    1,193
    Amazing!

    Impressive job Jody! Congrats!
    "We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna

  12. #12
    Xtreme Cruncher
    Join Date
    Jan 2009
    Posts
    121
    Wow, sub 7min on a 920. Definitely sets a new bar for the competition. I'd like to see this with some of the gskill perfect storm kits that hiwa showed. What tweaks you using?
    Last edited by posershadow; 05-01-2009 at 11:02 AM.

  13. #13
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,801
    sweet Jody congrats! how does the board fair with C0 stepping cpus interms of bclk.. C0 vs D0 how much difference ?

    Get well soon!
    ---

  14. #14
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by Hyperhorn View Post
    Good choice of benchmarks, very good choice.

    Congrats!
    thanks, is there any other benchmarks worth running???

    Quote Originally Posted by over@locker886 View Post
    Amazing!

    Impressive job Jody! Congrats!
    thanks buddy, more left from this setup in memory timings but i can hopefully squeeze out another BCLK or two with some fine voltage adjustments.

    Quote Originally Posted by rambler358 View Post
    Fantastic job!

    LN2 ?
    yup, forgot to put that in, just added it now. temps were only -55C ~ -60C for this run though. any colder didn't help as it is BCLK limited. i can bench at -90C with this chip and boot as cold as -125C before i get cold boot issues.

    Quote Originally Posted by posershadow View Post
    What tweaks you using?
    tweaks aren't a good term, makes it sound like pushing buttons. i run a well tuned and prepped OS with all the basic processes to improve SPi, nothing fancy. i've posted my processes too many times to repeat but the information is out there.

    Quote Originally Posted by eva2000 View Post
    sweet Jody congrats! how does the board fair with C0 stepping cpus interms of bclk.. C0 vs D0 how much difference ?

    Get well soon!
    come on George, you know you can't ask a blanket question like that, it all depends on the CPU

    the 965 C0 i have right now hates BCLK. 206~209 is all it will do on air on any board. under cold that goes up to about 225~230ish. it is the only chip aside from this 920 that i have used since getting the Classified.

    this little bastard is prime stable at 215BCLK on air in the Rampage Gene without trying. I haven't had it on the Classified on air yet, this session last night was the first time they met. it is my first D0 so i have nothing to compare it too, and i didn't have this board since the last time i had a decent BCLK'ing C0. so really, i don't have a whole lot of info.

    and thanks, already on the road to recovery

  15. #15
    SICK SICK SICK

  16. #16
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,193
    Quote Originally Posted by 3oh6 View Post
    thanks boss...after last night, i am well on my way to being back to 100% very soon
    your welcome and ehe

    will look forward to when your back 100% benching , so the 3d damage will come

  17. #17
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by k|ngp|n View Post
    SICK SICK SICK
    there he is, fire up the barb-E, me and the geeks is coming over for some fun later this month

  18. #18
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Some pretty nice clocking. Looks like your chip loves VTT Jody..

  19. #19
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,084
    any insight on the IOH PLL vcore? Sorry if you are ignoring me you dont have to answer
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  20. #20
    Quote Originally Posted by 3oh6 View Post
    there he is, fire up the barb-E, me and the geeks is coming over for some fun later this month
    Thats what I hear. Another EVGA launch party eh? Cool..

  21. #21
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by raju View Post
    Some pretty nice clocking. Looks like your chip loves VTT Jody..
    i forgot i had it that high. on air, this CPU won't run with anything over 1.45v...nothing higher will POST or run after changing in Windows. it was one of the things i wanted to check to see how cold affected it, turns out it can handle VTT at sub-zero temps. i guess i forgot to lower it when i started running.

    Quote Originally Posted by Bobbylite View Post
    any insight on the IOH PLL vcore? Sorry if you are ignoring me you dont have to answer
    sorry, didn't think you were actually asking a question since the screen shot covers it, but yes, running at 1.5v. the voltages in the screens might not need to be set as high as they are either, i didn't really play around due to time restriction. normally i run this board with both IOH and CPU PLL at 1.5v. never found a benefit over that on air. i was messing with these during my short BCLK hunting but plenty of work to go i think.

    Quote Originally Posted by k|ngp|n View Post
    Thats what I hear. Another EVGA launch party eh? Cool..
    yeah, i'll fire you a PM shortly.

  22. #22
    Xtreme Old School Moderator
    Join Date
    Sep 2002
    Location
    Portugal
    Posts
    1,670
    Congrats ..impressive achievement..

    EVGA Classified sure is a fantastic motherboard a really masterpiece

  23. #23
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,084
    thanks!
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  24. #24
    take me to the manbar
    Join Date
    Apr 2008
    Location
    South Africa :)
    Posts
    1,182
    Thats what im talking about Jody! Keep up the awesome benching! 7.75 5.2+ on 920.. WOW

  25. #25
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by Pedro Rocha View Post
    Congrats ..impressive achievement..

    EVGA Classified sure is a fantastic motherboard a really masterpiece
    thanks Pedro, these Classifieds sure are nice. it will just be interesting to see what some other boards do with these chips, or if the Classified really is the king.

    Quote Originally Posted by Bobbylite View Post
    thanks!
    no problem.

    Quote Originally Posted by Vivi2 View Post
    Thats what im talking about Jody! Keep up the awesome benching! 7.75 5.2+ on 920.. WOW
    haha, says the guy absolutely crushing any record within arms reach of a killer E8600. you keep up that E8600 onslaught and i'll keep this 920 benching going

Page 1 of 5 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •