[Quick Testing)OCZ Platinum "Animal" ---OCZ3P1333LVA6GK--- -

[Benny Lodewijk]

Got this kit a few days ago from OCZ USA, it's OCZ Platinum "Animal" series, 6 GB kit (2GB x3) rated at 1333 MHz (PC10666) CAS 7-7-7 @1.65v.

Not special isn't ???

Some photos :







Testing Specification

• Processor Intel Core i7-920
• Motherboard GIGABYTE EX58-Extreme
• Motherboard Foxconn Flaming Blade X58
• Memory OCZ3P1333LVA6GK
• VGA GIGABYTE GeForce 9800GTX+
• PSU GIGABYTE Odin Pro 1200 Watt
• Hardisk WDC2500AAKS

PS : EX58-Extreme can't continue the testing because must be sign to "another job"

DDR3-1600 CAS 7-7-7 @1.65v



DDR3-1800 CAS 8-8-8 @1.65v



DDR3-1866 CAS 8-8-8-8 @1.65v



DDR3-1950 CAS 9-9-9 @1.65v



DDR3-2000 CAS 9-9-9 @1.65v



DDR3-2024 CAS 9-9-9 @1.65v



How about the price ?? http://www.mwave.com/mwave/DeepSearc...A6GK&ALL=y&TP= under 100 US$ after MIR...


Amazing overclocking performance memory module with very low price.

[OverDozeD]

Great run on 1.65v

I've got platinium 1600 CL7 3Gb
OCs like a hell, could run 2000/CL7 @ 2.055 vDIMM fully stable
BTW chips are D9JNM AFAIK...

[nebuchanezzar]

Your last 3 screens show 1.664 and 1.794 for your vDimm voltage on the software reading. Were those raised and you just forgot to include it? Nice work regardless. Way to push some ram from the bottom to the top.

[Benny Lodewijk]

Your last 3 screens show 1.664 and 1.794 for your vDimm voltage on the software reading. Were those raised and you just forgot to include it? Nice work regardless. Way to push some ram from the bottom to the top.

I'm sure i give 1.65 volt in BIOS for the last screen, but i will check it again. This memory not like vdimm more than 1.65v

[ILikeCosmosS]

where can i get the cl7 1600 mhz 1?

[saaya]

nice, hope you have the time to update this with the d0 once you get it, so far nobody compared mem clocking of c0 vs d0
im sure youll need notably less vtt for the same clocks on d0, and you might even get higher max clocks, or at least tighter timings out of the d0... im curious myself

[Hazzan]

I think chipset same Blade PC 2000C9 look at that PCB same with Blade Series...

[whe3ls]

^
same ic's as i have on my Super talent 1333

[Benny Lodewijk]

nice, hope you have the time to update this with the d0 once you get it, so far nobody compared mem clocking of c0 vs d0
im sure youll need notably less vtt for the same clocks on d0, and you might even get higher max clocks, or at least tighter timings out of the d0... im curious myself

Yes, i will test D0 once i get it. Thanks for your help Saaya

[Benny Lodewijk]

Your last 3 screens show 1.664 and 1.794 for your vDimm voltage on the software reading. Were those raised and you just forgot to include it? Nice work regardless. Way to push some ram from the bottom to the top.

After check it again, it's 100% 1.65v... Aegis Panel sometimes show incorrect value, up and down, when i take the screenshot vdimm shown higher in AEGIS Panel. In BIOS, PChealth and Everest detect 1.65v

[saaya]

ill send you a newer version on msn now, let me know if it still shows vdimm wrong

[Benny Lodewijk]

Look at this screenshot, show 1.65v already :




Maks Pi 1M DDR3-2080 CAS 9-9-9



Max Clock

http://valid.canardpc.com/show_oc.php?id=555890

[Aerou]

hey, I just bought OCZ Platinum 3x2GB 1600 C7 bad boys. Wonder if their the same. But so far 100% Linpack + Memtest stable 1820 8-8-8 and I'll try higher once I get back to my rig. Cpu 1,2 VTT 1,34 MEM 1,68

Benny, what's your cpu and VTT voltage on the 1800 and 1866 runs?

We should try some action with higher voltage on the memory

[George_o/c]

Excellent memory performance for only a hundred buck !

Benny what's your experience from Foxconn Flaming Blade GTI so far ?

[Benny Lodewijk]

hey, I just bought OCZ Platinum 3x2GB 1600 C7 bad boys. Wonder if their the same. But so far 100% Linpack + Memtest stable 1820 8-8-8 and I'll try higher once I get back to my rig. Cpu 1,2 VTT 1,34 MEM 1,68

Benny, what's your cpu and VTT voltage on the 1800 and 1866 runs?

We should try some action with higher voltage on the memory

1800 and 1866 around 1.45 to 1.5v

Excellent memory performance for only a hundred buck !

Benny what's your experience from Foxconn Flaming Blade GTI so far ?

So far max stable blk 208 Mhz on air, but i use crappy CPU .. must wait for my i920 D0 next week and see how's going.

And btw i'm using Flaming Blade not GTI, i like this board, the layout, BIOS and stability. But still some issue about the BIOS, i hope the engineers can fix it soon.

[Shadowmage]

Awesome, nice to see the Animal RAM doing so well! I picked up a set after RyderOCZ urged me to do so. Plus, a $10 MWAVE.COM coupon + $20 MIR made the deal so much sweeter

I can't test it yet since I'm looking for a budget high performance motherboard. I'm very interested in the Flaming Blade for this reason. Can you post your experiences in this thread that I started in the Intel hw section? Thanks!

http://www.xtremesystems.org/forums/...d.php?t=223477

[Bei Fei]

I think chipset same Blade PC 2000C9 look at that PCB same with Blade Series...

The ram does have these chips

[SAE]

Impressive ram... that's what I call overclocking potential!

[RyderOCZ]

The animal is really good stuff guys, some of you have figured out its secret it seems

[Aerou]

The animal is really good stuff guys, some of you have figured out its secret it seems

Well, it's your fault you put such good stuff in it

[JH_man]

I dont understand why these sets are so incredible cheap! They are half the price of the other brands in same league... Anyone care to explain why?

And why do these 1333mhz set go so high in mhz in testing? Why bother going for a 1600mhz set?..

Also, picking up 2 of these sets, in total 12gb, would it still be easy to OC em? I am thinking about a new i7 920 rig, and choosing ram is giving a problem.

Also, have someone tried this 12gb set out? http://www.komplett.no/k/ki.aspx?sku=449940

Most likely going for a Asus P6T Deluxe V2 board.

EDIT:
I am not sure about the price, I was thinking I were looking at these ones but were instead looking at the price for OCZ3P1333LV6GK. The A is missing...

JH_man

[elite.ire]

awesome results :o, im looking at buying some tri channel for my new i7 system, i wonder are ocz using the same chips in the 1600mhz ocz gold as they are in there 2000mhz gold series :S, anyone know ?

[RyderOCZ]

Guys.. it is a special part.. just for you overclockers.

High bin.... 1333 price. I pretty much guarantee you will love it

[I34z1k]

Awesome stuff..

So which'd be better, the 2000c9s or these?

[RyderOCZ]

Awesome stuff..

So which'd be better, the 2000c9s or these?

These.