Micron D9KPV???

[zoob]

What kind of sub timings are you guys using? I'll post details on my kit when I get home.

[zoob]

Prime LargeFFT unfortunately, as right now I'm testing CPU stability.

[whe3ls]

1600 cas 9 at 1.65v?

[zoob]

Ya 1600 CAS9 1.65V
I'm still getting a feel for i7. Will try to tighten it to 8 next

[benko]

what are chips in this ram

http://www.links.hr/index.php?naziv=...kl=051.210.025


does anybody knows???

[zoob]

D9KPV
DDR3-1688ish 9-9-9-24 @ 1.65V 20 pass LinX stable
Tightening it to 8-8-8-24 will give me a BSOD after about 20 min of LinX.

[FragMagnet]

Hi guy.

Yesterday i've checked a Corsair XMS3 TR3X6G1600C8 Version 3.2 and used IC D9KPV

http://www.corsair.com/_datasheets/TR3X6G1600C8.pdf

Next days will test them

Interesting, I just received these the other day, and still no mention of them on Corsairs website ? They seem very stable at the default XMP profile of 7-7-7-23-2 on the UD5.

http://www.ncix.com/products/index.p...acture=Corsair

[stangracin2]

had to shove 2 volts through the stick for DDR1440 8-8-8-21-29. got it to 10k read. cant wait to get a nice kit

[stangracin2]

ok got it to 6-6-6-21 at 1440. its nowhere near stable though.
10.14k read
i tried to get a ss but it bsod'd on me as i opened vista snipping tool

[cdawall]

ok got it to 6-6-6-21 at 1440. its nowhere near stable though.
10.14k read
i tried to get a ss but it bsod'd on me as i opened vista snipping tool

what voltage?

this is @2.14v on D9JNL

[Mafio]

that is my new crucial pc10600 (CT3KIT12864BA1339.8FF) micron d9-kpt based.
on my dfi x58 UT and i7-920 D0 with some good voltage i've reached some interesting frequency.

2272mhz - cas9 - 2volt - 1t



2210mhz - cas8 - 2volt - 1t





all subtimings on auto

with more than 2 volt they can't boot on my dfi x58 and on foxconn blackops

p.s. low voltage rulez

[zoob]

More D9KPV testing. 3x2 GB DDR3-1600 8-8-8-24-1T @ 1.65V, CPU @ 20x201 SpeedStep enabled.
Rampage 2 Extreme information:
Dram timing control
1st information - 8-8-8-24-6-88-14-8-30-0
2nd information - 1N-59-61-62
3rd information - 7-7-18-9-9-9-7-6-4-7-7-4

[stangracin2]

what voltage?

this is @2.14v on D9JNL
http://img.techpowerup.org/090407/Capture016397.jpg

2.0 this is the farthest i'll go as it doen't have heatspreaders.

[cdawall]

2.0 this is the farthest i'll go as it doen't have heatspreaders.

feel the sticks they wont even be warm. the best way to cool ram is a fan and no HS's IMO.

[_d_]

hi all



Today i went to the shop and i bought some memory that 4GB kit DDR3 PC1333 (D9KPT)
price around 80$

so now i just waiting for Phenom II 955BE ( still not come yet in shop here) maybe in end of this month i will see it in the shop and i will upgrade my system to AM3, i hope

[whe3ls]

my supertalent pc3 1333 has the same ic's.

[M-XXXX]

Yesterday I've tryed my KPV rams. For now 1650mhz 7-7-7-20 without problems (1.65V)

[Radamanthys]

hi all



Today i went to the shop and i bought some memory that 4GB kit DDR3 PC1333 (D9KPT)
price around 80$

so now i just waiting for Phenom II 955BE ( still not come yet in shop here) maybe in end of this month i will see it in the shop and i will upgrade my system to AM3, i hope

What was the highest stable frecuency you got ?

I have the same chips with a 720BE unlocked.

Regards!

[M-XXXX]

Ive tested my rams and resoult is:

1.65V in Evga X58 SLI and 920 C1:

7-7-7-20 can go 828mhz
8-8-8-24 can go 875mhz
9-9-9-24 will do super pi on 930mhz

So I'm extremly happy with them. 6GB kit for only 90€ and can do 1650mhz cl7, and 1850+ at cl9. All this with "safe" voltage. I'll try higher voltage, when I'll have some spare time...

[freaksavior]

my results.