Duniek's POTS - NEW LINE

[jesperme]

I am waiting

[TheGreenFoX]

Duniek, could you post some pics of the 2,2kg wide pot?

[Duniek]

Duniek, could you post some pics of the 2,2kg wide pot?

post #36

[Duniek]

hybrid pot (fits to 295gtx and 9800gx2 as well)

[Duniek]

finally pics updated of gpu in first post

[Dümpler]

Please send me a PM with the price for the hybrid pot (GTX295 & 9800GX2). Stunning work as "always"...

[Harshal]

thats a neat looking pot my friend

[Duniek]

FINALLY

M2,5 thubnuts

cost a hell lot more than M4 and M3, but worth

[nyeah]

i'm waiting for my pot,
have you send it mike?

[1337_alpha]

Your work is breathtaking o.O

But why I have no permission to see the watercooling stuff in your signature?

[Hampti]

Hello Duniek. Please could you send me a PM with costs for one CPU Pot (fitting S775 and S1366) and one GPU-Pot for ATI Cards.

greets and thanks

[TheGoat Eater]

thanks - got my custom piece - freaking massive!

[Assassin48]

Got my GPU Pot

[BAGR_001]

Awesome VGA POTs Duniek!

[Duniek]

packaging

[Dualist]

Yo Mike.!
My little gpu pot is not so lonely now three of his mates have turned up in time for a christmas party...!!!!

Cheers man

[Rudster816]

Great pots.

Maybe you should post what kind of pots your currently selling (ones that arent custom order) with base prices.

[Duniek]

i wish i can

only request on private message/mail - thats a forum rules

[NCspecV81]

Alrighty, I finally got around to testing this nickle plated pot. I drop the probe straight into ln2 and it reads a max of -190c. Phenom II @ 1.87v @ 6.129Ghz has my probe @ anywhere between -185 to -186c on idle. During the cpu tests in 06 the max drop has it around -182c. Then again, assuming my probe is slightly off as I expected to read around -195c in straight ln2 the temps could have been -190 to -191c on idle to -187c on load at that speed with a properly calibrated fluke/uei.

[Rudster816]

Putting the probe in to the LN2 directly wont really give you an accurate reading at all. You need to put the probe in the pots base, or on the outside of the bottom as close to the CPU socket as possible. Otherwise you will just be measuring the tempeture of the LN2, which isnt the temp of your CPU.

I could be wrong, but the LN2 doesnt really change temp more than a couple C before evaporating.

[Duniek]

Putting the probe in to the LN2 directly wont really give you an accurate reading at all. You need to put the probe in the pots base, or on the outside of the bottom as close to the CPU socket as possible. Otherwise you will just be measuring the tempeture of the LN2, which isnt the temp of your CPU.

I could be wrong, but the LN2 doesnt really change temp more than a couple C before evaporating.

yep, he knows that

in pot he have special hole near base for temp probe and he used it

[NCspecV81]

Putting the probe in to the LN2 directly wont really give you an accurate reading at all. You need to put the probe in the pots base, or on the outside of the bottom as close to the CPU socket as possible. Otherwise you will just be measuring the tempeture of the LN2, which isnt the temp of your CPU.

I could be wrong, but the LN2 doesnt really change temp more than a couple C before evaporating.

that was the point I was making in that direct contact with ln2 wasn't even close to -196c on my dt200. With my probe in the correct spot on the container its possible my temps were actually lower than reported.

[jar032]

do you sell cpu pots?

[crio]

jar032
First of all you can send private messages and laso STOP SPAMMING

[jar032]

do you have a cpu pot thread? i am interest in a pot