I'll share some settings from a 3D benching session the other night.
3DM06 Bot Link
System is Sig. P09 Bios:
Code:CPU Features PPM : Disabled EIST : Disabled CxE : Disabled Execute Disable Bit : Disabled Virtualization : Disabled Hyper Threading : Enabled Active Processor Cores : All Memory Settings Memory Controller Settings IMC Configuration : Enabled Channel Congifuration : Independant Channel Interleaving :6-Way Rank Interleaving : 4-Way Memory Timings Extreme Memory Profile XMP : Disabled Memory Profile Select : Manual DRAM Timing Control : tCL (CAS Latency) : 9 tRCG (RAS to CAS Delay) : 9 tRP (RAS Precharge) : 9 tRAS (Precharge Delay) : 24 CR (Command Rate) : 1T tRFC (Refresh Cycle Time) : 92 tWR (Write Recovery Time) : AUTO tWTR (Write to Read Delay) : AUTO tRRD (RAS to RAS Delay) : AUTO tRTP (Read to Precharge) : AUTO All Voltage Settings CPU Voltages CPU Core Voltage : +250mv = 1.376v CPU Target Core Voltage : CPU Vdroop Compensation : Disabled CPU VTT (UnCore) Voltage : +260mv = 1.450v 1.8 PPL Voltage Setting : 1.9v CPU Clock Amplitude Ctrl : Default Memory Voltages DRAM Voltage : 1.80v DIMM1 Vref CA (Addresses) : Default DIMM1 Vref DQ (Data) : Default DIMM2 Vref CA (Addresses) : Default DIMM2 Vref DQ (Data) : Default DIMM3 Vref CA (Addresses) : Default DIMM3 Vref DQ (Data) : Default Chipset Voltages X58 IOH Core Voltage : 1.300v X58 IOH VCCA 1.1V : 1.14 X58 IOH VCCA 1.5V : 1.553 ICH10 SB Voltage : 1.553 OC Gear : CPU Turbo : Disabled System Turbo : Enabled Clock Speed Control Center CPU Bclock (FSB) : 200MHz QPI Link Fast Mode : Enabled QPI Multiplier : 18x QPI Target Speed : 3605 CPU Core Multiplier : 23x CPU Core Target Speed : 4603 CPU Uncore Multiplier : 16x CPU Uncore Target Speed : 4010 Memory Bus Multiplier : 8x Memory Bus Target Speed : 2005 PCIx: 102MHz
Bookmarks