Page 5 of 6 FirstFirst ... 23456 LastLast
Results 101 to 125 of 134

Thread: Foxconn BloodRage Shared BIOS Settings

  1. #101
    Registered User
    Join Date
    Aug 2008
    Location
    Calgary, AB. Canada
    Posts
    90
    I'll share some settings from a 3D benching session the other night.
    3DM06 Bot Link
    System is Sig. P09 Bios:
    Code:
    CPU Features
    PPM : Disabled
    EIST : Disabled
    CxE : Disabled
    Execute Disable Bit : Disabled
    Virtualization : Disabled
    Hyper Threading : Enabled
    Active Processor Cores : All
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Congifuration : Independant
    Channel Interleaving :6-Way
    Rank Interleaving : 4-Way
    Memory Timings
    Extreme Memory Profile XMP : Disabled
    Memory Profile Select : Manual
    DRAM Timing Control :
    tCL (CAS Latency) : 9
    tRCG (RAS to CAS Delay) : 9
    tRP (RAS Precharge) : 9
    tRAS (Precharge Delay) : 24
    CR (Command Rate) : 1T
    tRFC (Refresh Cycle Time) : 92
    tWR (Write Recovery Time) : AUTO
    tWTR (Write to Read Delay) : AUTO
    tRRD (RAS to RAS Delay) : AUTO
    tRTP (Read to Precharge) : AUTO
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +250mv = 1.376v
    CPU Target Core Voltage :
    CPU Vdroop Compensation : Disabled
    CPU VTT (UnCore) Voltage : +260mv = 1.450v
    1.8 PPL Voltage Setting : 1.9v
    CPU Clock Amplitude Ctrl : Default
    Memory Voltages
    DRAM Voltage : 1.80v
    DIMM1 Vref CA (Addresses) : Default
    DIMM1 Vref DQ (Data) : Default
    DIMM2 Vref CA (Addresses) :  Default
    DIMM2 Vref DQ (Data) :  Default
    DIMM3 Vref CA (Addresses) :  Default
    DIMM3 Vref DQ (Data) :  Default
    Chipset Voltages
    X58 IOH Core Voltage : 1.300v
    X58 IOH VCCA 1.1V : 1.14
    X58 IOH VCCA 1.5V : 1.553
    ICH10 SB Voltage : 1.553
    OC Gear : 
    CPU Turbo : Disabled
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 200MHz
    QPI Link Fast Mode : Enabled
    QPI Multiplier : 18x
    QPI Target Speed : 3605
    CPU Core Multiplier : 23x
    CPU Core Target Speed : 4603
    CPU Uncore Multiplier : 16x
    CPU Uncore Target Speed : 4010
    Memory Bus Multiplier : 8x
    Memory Bus Target Speed : 2005
    PCIx: 102MHz
    Last edited by Ol'Baditude; 10-19-2009 at 10:09 PM.
    Asus R2E-1504 | i7 950@ 4.0G HT -1.248v Load CPUZ
    Thermalright VenX | Denki H1011|ICD-7
    Intel X25-M G2 80G|Saph.HD4670 512G | Enhance EPS0312-1250w
    Navig Special | Win7u64 | 6G HyperX T1 @ 800M 7-8-7-21-1T & 1.66v

  2. #102
    Registered User
    Join Date
    Sep 2009
    Posts
    26
    The prior BIOS settings I posted were based on a 20x CPU multiplier.

    The settings I came up for a 19x CPU multipler (below) are completly different. For example, at 20x, my BCLK wall was around 205. At 19x, the wall is much higher at 224. I was also able to drop VDIMM to 1.65 (i.e., VTT/VDIMM ratio different).

    I can't get CAS 6 with this overclock, but other memory timings can probably be tightened.

    I've settled on BCLK 222, although BCLK 223 passed LinX large memory.

    Code:
    CPU & Batch (i7 920 D0 - 3901A257)
    RAM Model (6GB Redline Ascent 998691 - Rated 6-7-6 at 1600)
    Bios Ver: Quantum BIOS (G25)
    
    CPU Features
    PPM : Enabled
    EIST : Enabled
    CxE : Disabled
    Execute Disable Bit : Enabled
    Virtualization : Disabled
    Hyper Threading : Disabled
    Active Processor Cores : All
    
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Congifuration : Independant
    Channel Interleaving :6-Way
    Rank Interleaving : 4-Way
    Memory Timings
    Extreme Memory Profile XMP : Disabled
    Memory Profile Select : 
    DRAM Timing Control : Manual
    tCL (CAS Latency) : 7T
    tRCG (RAS to CAS Delay) : 8T
    tRP (RAS Precharge) : 7T
    tRAS (Precharge Delay) : 20T
    CR (Command Rate) : 1T
    tRFC (Refresh Cycle Time) : 74T
    tWR (Write Recovery Time) : 10T
    tWTR (Write to Read Delay) : 20T
    tRRD (RAS to RAS Delay) : 4T
    tRTP (Read to Precharge) : 8T
    
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +170mv
    CPU Target Core Voltage : 1.43875 (VID=1.27)
    CPU Vdroop Compensation : Disabled
    CPU VTT (UnCore) Voltage : +160mv
    1.8 PPL Voltage Setting : 1.828v
    CPU Clock Amplitude Ctrl : 1.000 
    
    Memory Voltages
    DRAM Voltage : 1.65v
    DIMM1 Vref CA (Addresses) : Default
    DIMM1 Vref DQ (Data) : Default
    DIMM2 Vref CA (Addresses) :  Default
    DIMM2 Vref DQ (Data) :  Default
    DIMM3 Vref CA (Addresses) :  Default
    DIMM3 Vref DQ (Data) :  Default
    
    Chipset Voltages
    X58 IOH Core Voltage : 1.24v
    X58 IOH VCCA 1.1V : 1.108V
    X58 IOH VCCA 1.5V : 1.518V
    ICH10 SB Voltage : 1.530
    
    OC Gear : 
    Spread Spectrum : Disabled
    CPU Clock Skew : 0ps
    IOH Clock Skew : 0ps
    
    CPU Turbo : Disabled
    System Turbo : Enabled
    
    Clock Speed Control Center
    CPU Bclock (FSB) : 222MHz
    QPI Link Fast Mode : Enabled
    QPI Multiplier : 18x
    QPI Target Speed : 4001MHz
    CPU Core Multiplier : 19x
    CPU Core Target Speed : 4224MHz
    CPU Uncore Multiplier : 16x
    CPU Uncore Target Speed : 3561MHz
    Memory Bus Multiplier : 8x
    Memory Bus Target Speed : 1780MHz
    PCIx: 102MHz

  3. #103
    Registered User
    Join Date
    Nov 2008
    Posts
    3
    Having a strange problem.. was using P06 BIOS and updated to P09. (problem occurred in both BIOS)
    When using sata mode = IDE the system will not accept a BCLK higher than about 160 (sporadically it will work at ~170).. the sytem will hang right after post, with the error code sitting at 8F or 94, seemingly random

    but when setting it to RAID or AHCI mode it will boot without problem.

    Using mushkin blackline 1600 set to default timings and x8 mem mult. 1.65-1.7 v
    i7 920

    EDIT: whoops meant to post this in the other thread.
    Last edited by erbe; 11-02-2009 at 07:21 AM.

  4. #104
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    Quote Originally Posted by erbe View Post
    Having a strange problem.. was using P06 BIOS and updated to P09. (problem occurred in both BIOS)
    When using sata mode = IDE the system will not accept a BCLK higher than about 160 (sporadically it will work at ~170).. the sytem will hang right after post, with the error code sitting at 8F or 94, seemingly random

    but when setting it to RAID or AHCI mode it will boot without problem.

    Using mushkin blackline 1600 set to default timings and x8 mem mult. 1.65-1.7 v
    i7 920

    EDIT: whoops meant to post this in the other thread.
    Have you tried my favorite "solution for everything" .. tRFC increasing (try 92 for example).

    Not sure if its random or not.. but it seems that BloodRage has more than average amount of problems with Mushkins memory.. (tough.. not only mobo that has problem with them).

    Also can be problem with your HDD..
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  5. #105
    Registered User
    Join Date
    Jun 2009
    Posts
    17
    Hi guys,
    anyone on the site willing to sell me the waterblock for the northbridge
    foxconn bloodrage, especially if you have no intention of cooling your pc
    with water, school project...many thanks mal1954

  6. #106
    Registered User
    Join Date
    Jul 2006
    Location
    Guest in Thailand
    Posts
    74
    New system is ready and running . I reached what i hoped for without a sweat - 21x200 at 64 C (HK Rev3 and a Xchanger 480). I leave it there for now as 24/7 setup.

    One problem i have though at first boot (P09) - it shows 133 Bclock and goes into save mode. I have to access the BIOS and save the settings again to boot normal. The system is perfectly stable and a Windows restart behaves like it should. Not sure if i have a setting wrong or if this is a BIOS bug ? Any tips would be highly appreciated.


    CPU & Batch: i7-920 D0 3920A913
    RAM Model: Mushkin 6GB XP3-15000 REDLINE CL7
    Bios Ver: Quantum BIOS P09

    CPU Features
    PPM ...............................: Enabled
    EIST ..............................: Enabled
    CxE................................: Disabled
    Execute Disable Bit ...............: Disabled
    Virtualization.....................: Disabled
    Hyper Threading ...................: Disabled
    Active Processor Cores ............: All

    Memory Settings
    Memory Controller Settings
    IMC Configuration .................: Enabled
    Channel Congifuration .............: Independent
    Channel Interleaving ..............: 6 way
    Rank Interleaving .................: 4 way

    Memory Timings
    Extreme Memory Profile XMP ........: Disabled
    Memory Profile Select .............:
    DRAM Timing Control ...............: Manual
    tCL (CAS Latency) .................: 7T
    tRCG (RAS to CAS Delay) ...........: 7T
    tRP (RAS Precharge) ...............: 6T
    tRAS (Precharge Delay) ............: 20T
    CR (Command Rate) .................: 1T
    tRFC (Refresh Cycle Time) .........: auto
    tWR (Write Recovery Time) .........: auto
    tWTR (Write to Read Delay) ........: auto
    tRRD (RAS to RAS Delay) ...........: auto
    tRTP (Read to Precharge) ..........: auto

    All Voltage Settings

    CPU Voltages
    CPU Core Voltage ..................: +60mV
    CPU Target Core Voltage ...........: 1.31V (1.29V cpuz)
    CPU Vdroop Compensation ...........: disabled
    CPU VTT (UnCore) Voltage ..........: +100mV
    1.8 PPL Voltage Setting ...........: 1.800V
    CPU Clock Amplitude Ctrl ..........: 0.800V

    Memory Voltages
    DRAM Voltage ......................: 1.65V
    DIMM1 Vref CA (Addresses) .........: x 0.500
    DIMM1 Vref DQ (Data) ..............: x 0.500
    DIMM2 Vref CA (Addresses) .........: x 0.500
    DIMM2 Vref DQ (Data) ..............: x 0.500
    DIMM3 Vref CA (Addresses) .........: x 0.500
    DIMM3 Vref DQ (Data) ..............: x 0.500

    Chipset Voltages
    X58 IOH Core Voltage .............: 1.20V
    X58 IOH VCCA 1.1V ................: 1.116V
    X58 IOH VCCA 1.5V ................: 1.506V
    ICH10 SB Voltage .................: 1.506V

    OC Gear : Skipping this part

    CPU Turbo .........................: Always On
    System Turbo ......................: Enabled

    Clock Speed Control Center
    CPU Bclock (FSB) ................: 200MHz
    QPI Link Fast Mode ..............: Enabled
    QPI Multiplier ..................: x18
    QPI Target Speed ................: 3605MHz (7.2GT/s)
    CPU Core Multiplier .............: x20 (21)
    CPU Core Target Speed ...........: 4006MHz (4200MHz)
    CPU Uncore Multiplier ...........: x16
    CPU Uncore Target Speed .........: 3208MHz
    Memory Bus Multiplier ...........: x8
    Memory Bus Target Speed .........: 1604MHZ
    PCI Express Bus Clock............: 100MHz
    3930K - 4.8 Ghz water cooled, 1.38 v, 68 C | ASUS P9X79 | G.Skill 16GB @ 2400 MHz | 2x Intel X25-M G2 160 GB SSD, 2x Raptor 150, 1x WD20EARS 64 MB 2TB | Tagan 1100 | ASUS 670 GTX DC II Top @ ~1350/6800

  7. #107
    Registered User
    Join Date
    Jul 2006
    Location
    Guest in Thailand
    Posts
    74
    Any tips regarding the boot bug ? It's a bit annoying to say the least...
    3930K - 4.8 Ghz water cooled, 1.38 v, 68 C | ASUS P9X79 | G.Skill 16GB @ 2400 MHz | 2x Intel X25-M G2 160 GB SSD, 2x Raptor 150, 1x WD20EARS 64 MB 2TB | Tagan 1100 | ASUS 670 GTX DC II Top @ ~1350/6800

  8. #108
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    You mean cold boot bug, eg. PC doesn´t boot up correctly when its long time shuted down? (for night for example)
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  9. #109
    Registered User
    Join Date
    Jun 2008
    Posts
    22
    Quote Originally Posted by Mescalamba View Post
    You mean cold boot bug, eg. PC doesn´t boot up correctly when its long time shuted down? (for night for example)
    In my case, it's a memory problem, have to rma them.
    Foxconn Bloodrage | i7 920 @ 4.2 ghz | 6GB Gskill Trident CL6 | Ati 5850 | Corsair X64 + Samsung F3 1TB | Corsair HX620W | TFT Dell E248WFP

  10. #110
    Registered User
    Join Date
    Jul 2006
    Location
    Guest in Thailand
    Posts
    74
    Quote Originally Posted by Mescalamba View Post
    You mean cold boot bug, eg. PC doesn´t boot up correctly when its long time shuted down? (for night for example)
    Thanks for your replies. Yeah, happens only when the PC is shut down completely. Windows restart always works, saving BIOS (with the same settings) always works. Cold bug is probably not the correct description at 28 C ?

    My RAM appear to be perfectly fine - no errors whatsoever.
    3930K - 4.8 Ghz water cooled, 1.38 v, 68 C | ASUS P9X79 | G.Skill 16GB @ 2400 MHz | 2x Intel X25-M G2 160 GB SSD, 2x Raptor 150, 1x WD20EARS 64 MB 2TB | Tagan 1100 | ASUS 670 GTX DC II Top @ ~1350/6800

  11. #111
    Xtreme Member
    Join Date
    Mar 2009
    Location
    Sunny South Florida
    Posts
    439
    I am hoping for some help for you guys. This might be off slightly because I am doing this from work. I have gotten as high as 4.44GHz with turbo on. I am shooting for a benchable 4.5GHz+, not 24/7 specs. If you guys can help out it would be greatly appreciated. Thx in advance.

    CPU & Batch: i7-920 D0 3910A307
    RAM Model: Corsair Dominator GT 1600MHz 6GB
    Bios Ver: Quantum BIOS P09

    CPU Features
    PPM ...............................: Enabled
    EIST ..............................: Enabled
    CxE................................: Disabled
    Execute Disable Bit ...............: Disabled
    Virtualization.....................: Disabled
    Hyper Threading ...................: Enable
    Active Processor Cores ............: All
    CPU QPI Latency ..............: Auto (i have tried 100)
    IOH QPI Latency ...............: Auto
    CPU QPI Drive Strength .......: Auto
    IOH QPI Drive Strength .......: Auto

    Memory Settings
    Memory Controller Settings
    IMC Configuration .................: Enabled
    Channel Congifuration .............: Independent
    Channel Interleaving ..............: 6 way
    Rank Interleaving .................: 4 way

    Memory Timings
    Extreme Memory Profile XMP ........: Disabled
    Memory Profile Select .............:
    DRAM Timing Control ...............: Manual
    tCL (CAS Latency) .................: 7T
    tRCG (RAS to CAS Delay) ...........: 8T
    tRP (RAS Precharge) ...............: 7T
    tRAS (Precharge Delay) ............: 20T
    CR (Command Rate) .................: 1T
    tRFC (Refresh Cycle Time) .........: 62T
    tWR (Write Recovery Time) .........: 6T
    tWTR (Write to Read Delay) ........: 14T
    tRRD (RAS to RAS Delay) ...........: 3T
    tRTP (Read to Precharge) ..........: 3T

    All Voltage Settings

    CPU Voltages
    CPU Core Voltage ..................: +270mV (not sure but in the neighborhood)
    CPU Target Core Voltage ...........: 1.4875V (VID =1.23)
    CPU Vdroop Compensation ...........: disabled
    CPU VTT (UnCore) Voltage ..........: +300mV
    1.8 PPL Voltage Setting ...........: 1.890V
    CPU Clock Amplitude Ctrl ..........: 0.900V

    Memory Voltages
    DRAM Voltage ......................: 1.65V
    DIMM1 Vref CA (Addresses) .........: x 0.500
    DIMM1 Vref DQ (Data) ..............: x 0.500
    DIMM2 Vref CA (Addresses) .........: x 0.500
    DIMM2 Vref DQ (Data) ..............: x 0.500
    DIMM3 Vref CA (Addresses) .........: x 0.500
    DIMM3 Vref DQ (Data) ..............: x 0.500

    Chipset Voltages
    X58 IOH Core Voltage .............: 1.22V
    X58 IOH VCCA 1.1V ................: 1.116V
    X58 IOH VCCA 1.5V ................: 1.506V
    ICH10 SB Voltage .................: 1.530V

    OC Gear : Skipping this part

    CPU Turbo .........................: Always On
    System Turbo ......................: Enabled

    Clock Speed Control Center
    CPU Bclock (FSB) ................: 211MHz
    QPI Link Fast Mode ..............: Enabled
    QPI Multiplier ..................: x18
    QPI Target Speed ................: 3798MHz (7.2GT/s)
    CPU Core Multiplier .............: x20 (21)
    CPU Core Target Speed ...........: 4226MHz (4436MHz)
    CPU Uncore Multiplier ...........: x16
    CPU Uncore Target Speed .........: 3388MHz
    Memory Bus Multiplier ...........: x8
    Memory Bus Target Speed .........: 1694MHZ
    PCI Express Bus Clock............: 100MHz

    I have tried 103MHz on pci-e bus and changing CPU QPI Latency to 100 but no boot up past 215 bclk. 214 boot at 1.56v but usb items start flickering. Keep in mind, I am not looking for stable settings just enough to run 3DMark Vatage and 06. Thx.
    Last edited by CobraXP; 01-08-2010 at 04:26 AM.
    Intel System
    CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
    Mobo: Foxconn BloodRage X58 P11 Bios
    Ram: Corsair Dominator 12GB DDR3
    Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
    Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
    OS HDD: Samsung 950 Pro 512 MB M.2
    Strorage HDD: W.D. VelociRaptor 300GB
    Storage HDD: W.D. 500GB
    PSU: Enermax Evo Galaxy 1250 Watt
    Case: Cooler Master Cosmos S
    Roms: Lite On DVD Burner
    Roms: Asus Bluray Burner
    OS: Windows 7 Ultimate 64-bit

  12. #112
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    Quote Originally Posted by Mango31 View Post
    Thanks for your replies. Yeah, happens only when the PC is shut down completely. Windows restart always works, saving BIOS (with the same settings) always works. Cold bug is probably not the correct description at 28 C ?

    My RAM appear to be perfectly fine - no errors whatsoever.
    It means that PC was cold (shuted down for longer period of time) before. Not related with cold itself. Its bit wierd.. seems like corrupt BIOS? Have you tried to reflash it? Btw. post this questions in main thread pls (Eg. under Foxconn - Quantum Force) this thread is dedicated to sharing BIOS settings, not questions/answers.
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  13. #113
    Xtreme Member
    Join Date
    Mar 2008
    Location
    houston , TX
    Posts
    179
    CPU & Batch: Core i7 920 3849B016
    RAM Model: corsair dominator GT 1866mhz 7-8-7-20 trc-48 2T
    Bios Ver: Quantum BIOS P09
    foxconn bloodrage.

    can someone add bios setting for me?
    push the system to the max but in the safe side (24/7).

    what is the safe temp for the CPU and the NB? (idle and load)

    thanks you

  14. #114
    Registered User
    Join Date
    Jun 2008
    Posts
    37

    Still unstable

    CPU & Batch: Core i7 920 3945A943
    RAM Model: Corsair Dominator GT 1866mhz 7-8-7-20 1T
    Foxconn Bloodrage BIOS P09

    I have the same base components as Pelo911, diff batch processor.
    Im at 200bclk and it primes just fine @ 4.2. VTT I had to add 220mv or it wouldn't boot. I think the processor is fine, but my mem modules are acting finicky. I have them running at 2005mhz. Ive tried 7-7-7-20, 7-8-7-20, 8-8-8-20,8-8-8-21, 8-8-8-24, and even 9-9-9-24. These are my settings at the moment

    CPU Features
    PPM : Enabled
    EIST : Enabled
    CxE : Disabled
    Execute Disable Bit : Enabled
    Virtualization : Enabled
    Hyper Threading : On
    Active Processor Cores : All
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Congifuration : INDEPENDENT
    Channel Interleaving : 6 WAY
    Rank Interleaving : 4 WAY
    Memory Timings
    Extreme Memory Profile XMP : Disabled
    DRAM Timing Control : Manual
    tCL (CAS Latency) : 7
    tRCG (RAS to CAS Delay) : 7
    tRP (RAS Precharge) : 7
    tRAS (Precharge Delay) :20
    CR (Command Rate) : 1T
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : + 40MV (also testing 100mv)
    CPU Target Core Voltage : 1.3250
    CPU Vdroop Compensation : Disabled
    CPU VTT (UnCore) Voltage : + 220MV
    1.8 PPL Voltage Setting : 1.913
    CPU Clock Amplitude Ctrl : 900
    Memory Voltages
    DRAM Voltage : 1.65 (also tried 1.70)
    DIMM1 Vref CA (Addresses) : x0.500
    DIMM1 Vref DQ (Data) : x0.500
    DIMM2 Vref CA (Addresses) : x0.500
    DIMM2 Vref DQ (Data) : x0.500
    DIMM3 Vref CA (Addresses) : x0.500
    DIMM3 Vref DQ (Data) : x0.500
    Chipset Voltages
    X58 IOH Core Voltage : 1.30
    X58 IOH VCCA 1.1V : 1.134
    X58 IOH VCCA 1.5V : 1.506
    ICH10 SB Voltage : 1.506
    OC Gear
    CPU Turbo : Always On
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 200
    QPI Link Fast Mode : Enabled
    QPI Multiplier : 18x
    QPI Target Speed : 3605
    CPU Core Multiplier : 20X
    CPU Core Target Speed : 4006
    CPU Uncore Multiplier : 20X
    CPU Uncore Target Speed : 4010
    Memory Bus Multiplier : 10x
    Memory Bus Target Speed : 2005
    PCIE Clock: 103
    CPU Clock Skew : 100ps
    IOH Clock Skew : 0ps

    idle temp: atleast -13c
    Load temp: 0-8c
    IOH temp: 30-34c

    This is only my 2nd day oc'ing i7's any help would be awesome.

  15. #115
    Registered User
    Join Date
    Jun 2008
    Posts
    37

    Stable so far

    Quick update. Got the clocks to work. (4.2 ghz cpu, 2005mhz 7-7-7-20 mem)
    I was using +40mv at first, so I increased it until the bluescreens stopped. They stopped at +120mv. The mem is holding strong at tight timings with 1.67v in bios, but it is really like 1.69 in windows.
    All I had time to do this morning was run a couple benchmarks and go to work.

    I ran Vantage with gpu clocked at 738 core, 1512 shaders, and 1224 mem (got a bad one : /) and scored 16099 with physics on gpu
    I also tested 3dm06 with same settings and scored 21759.

    Ill try and post pictures (when I figure out how) of my rig. It's kinda just mocked up, zip tied and very industrial right now : /
    Ran out of coolant, so I couldn't quite redo all my tubing. I need longer & better tubing to stop the kinks.

  16. #116
    Xtreme Member
    Join Date
    Mar 2009
    Location
    Sunny South Florida
    Posts
    439
    These are my 24/7 settings on wc

    CPU & Batch: i7-920 D0 3910A307
    RAM Model: Corsair Dominator GT 1600MHz 6GB
    Bios Ver: Quantum BIOS P09

    CPU Features
    PPM ...............................: Enabled
    EIST ..............................: Enabled
    CxE................................: Disabled
    Execute Disable Bit ...............: Disabled
    Virtualization.....................: Disabled
    Hyper Threading ...................: Enable
    Active Processor Cores ............: All
    CPU QPI Latency ..............: Auto (i have tried 100)
    IOH QPI Latency ...............: Auto
    CPU QPI Drive Strength .......: Auto
    IOH QPI Drive Strength .......: Auto

    Memory Settings
    Memory Controller Settings
    IMC Configuration .................: Enabled
    Channel Congifuration .............: Independent
    Channel Interleaving ..............: 6 way
    Rank Interleaving .................: 4 way

    Memory Timings
    Extreme Memory Profile XMP ........: Disabled
    Memory Profile Select .............:
    DRAM Timing Control ...............: Manual
    tCL (CAS Latency) .................: 6T
    tRCG (RAS to CAS Delay) ...........: 7T
    tRP (RAS Precharge) ...............: 6T
    tRAS (Precharge Delay) ............: 18T
    CR (Command Rate) .................: 1T
    tRFC (Refresh Cycle Time) .........: 59T
    tWR (Write Recovery Time) .........: 8T
    tWTR (Write to Read Delay) ........: 14T
    tRRD (RAS to RAS Delay) ...........: 4T
    tRTP (Read to Precharge) ..........: 4T

    All Voltage Settings

    CPU Voltages
    CPU Core Voltage ..................: +90mV
    CPU Target Core Voltage ...........: 1.32750V (VID =1.23)
    CPU Vdroop Compensation ...........: disabled
    CPU VTT (UnCore) Voltage ..........: +60mV
    1.8 PPL Voltage Setting ...........: 1.800V
    CPU Clock Amplitude Ctrl ..........: 0.800V

    Memory Voltages
    DRAM Voltage ......................: 1.63V
    DIMM1 Vref CA (Addresses) .........: x 0.500
    DIMM1 Vref DQ (Data) ..............: x 0.500
    DIMM2 Vref CA (Addresses) .........: x 0.500
    DIMM2 Vref DQ (Data) ..............: x 0.500
    DIMM3 Vref CA (Addresses) .........: x 0.500
    DIMM3 Vref DQ (Data) ..............: x 0.500

    Chipset Voltages
    X58 IOH Core Voltage .............: 1.22V
    X58 IOH VCCA 1.1V ................: 1.108V
    X58 IOH VCCA 1.5V ................: 1.506V
    ICH10 SB Voltage .................: 1.518V

    OC Gear : Skipping this part

    CPU Turbo .........................: Enabled
    System Turbo ......................: Enabled

    Clock Speed Control Center
    CPU Bclock (FSB) ................: 200MHz
    QPI Link Fast Mode ..............: Enabled
    QPI Multiplier ..................: x18
    QPI Target Speed ................: 3605MHz (7.2GT/s)
    CPU Core Multiplier .............: x20 (21)
    CPU Core Target Speed ...........: 4006MHz (4206MHz)
    CPU Uncore Multiplier ...........: x16
    CPU Uncore Target Speed .........: 3208MHz
    Memory Bus Multiplier ...........: x8
    Memory Bus Target Speed .........: 1604MHZ
    PCI Express Bus Clock............: 100MHz
    Intel System
    CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
    Mobo: Foxconn BloodRage X58 P11 Bios
    Ram: Corsair Dominator 12GB DDR3
    Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
    Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
    OS HDD: Samsung 950 Pro 512 MB M.2
    Strorage HDD: W.D. VelociRaptor 300GB
    Storage HDD: W.D. 500GB
    PSU: Enermax Evo Galaxy 1250 Watt
    Case: Cooler Master Cosmos S
    Roms: Lite On DVD Burner
    Roms: Asus Bluray Burner
    OS: Windows 7 Ultimate 64-bit

  17. #117
    Xtreme Member
    Join Date
    Mar 2008
    Location
    houston , TX
    Posts
    179
    CobraXp

    i use your bios setting:


    there is some setting i need to choose in Linx or use the default??

    what's next? there is a chance to go higher and stay stable for 24/7?

    thanks

  18. #118
    Xtreme Member
    Join Date
    Mar 2009
    Location
    Sunny South Florida
    Posts
    439
    this is for 24/7. i passed 4 hrs of the intel burn in test. have linx but never used it for long periods of time... keep in mind every cpu, mobo, ram, and psu are different. you may have to play with the settings for awhile till you get it. also keep in mind this is on water... not the self contained systems but the custom kits.
    Intel System
    CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
    Mobo: Foxconn BloodRage X58 P11 Bios
    Ram: Corsair Dominator 12GB DDR3
    Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
    Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
    OS HDD: Samsung 950 Pro 512 MB M.2
    Strorage HDD: W.D. VelociRaptor 300GB
    Storage HDD: W.D. 500GB
    PSU: Enermax Evo Galaxy 1250 Watt
    Case: Cooler Master Cosmos S
    Roms: Lite On DVD Burner
    Roms: Asus Bluray Burner
    OS: Windows 7 Ultimate 64-bit

  19. #119
    Xtreme Member
    Join Date
    Mar 2008
    Location
    houston , TX
    Posts
    179
    Quote Originally Posted by CobraXP View Post
    this is for 24/7. i passed 4 hrs of the intel burn in test. have linx but never used it for long periods of time... keep in mind every cpu, mobo, ram, and psu are different. you may have to play with the settings for awhile till you get it. also keep in mind this is on water... not the self contained systems but the custom kits.
    what is your system temp on load for 4 hour?

    my temps are safe?

  20. #120
    Xtreme Member
    Join Date
    Mar 2009
    Location
    Sunny South Florida
    Posts
    439
    during summer I was just under 83c with the apogee gtx water block. I am at 79c with the apogee xt.
    Intel System
    CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
    Mobo: Foxconn BloodRage X58 P11 Bios
    Ram: Corsair Dominator 12GB DDR3
    Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
    Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
    OS HDD: Samsung 950 Pro 512 MB M.2
    Strorage HDD: W.D. VelociRaptor 300GB
    Storage HDD: W.D. 500GB
    PSU: Enermax Evo Galaxy 1250 Watt
    Case: Cooler Master Cosmos S
    Roms: Lite On DVD Burner
    Roms: Asus Bluray Burner
    OS: Windows 7 Ultimate 64-bit

  21. #121
    Xtreme Enthusiast
    Join Date
    Oct 2009
    Location
    Arlington, TX
    Posts
    576
    Anyone running this board still? Preferably with Dom GTS 2000mhz sticks. I just setup my system and I'm a total newb to all the I7 overclocking stuff. All this vtt and bclk etc. The only intel chip I've ever played with was a E8400 was successful in reaching 4.2 with it, but this bios is completely different and its been right at a year since I played around in a bios to begin with let alone an intel setup let alone i7. :-(
    Quote Originally Posted by SkItZo View Post
    Any worklog of the girl in your avatar?
    HEAT
    EBAY

    Project Slumber Parties aka PSP Liquid Cooling Work Log

  22. #122
    Xtreme Enthusiast
    Join Date
    Oct 2009
    Location
    Arlington, TX
    Posts
    576
    Quote Originally Posted by CobraXP View Post
    I am hoping for some help for you guys. This might be off slightly because I am doing this from work. I have gotten as high as 4.44GHz with turbo on. I am shooting for a benchable 4.5GHz+, not 24/7 specs. If you guys can help out it would be greatly appreciated. Thx in advance.

    CPU & Batch: i7-920 D0 3910A307
    RAM Model: Corsair Dominator GT 1600MHz 6GB
    Bios Ver: Quantum BIOS P09

    CPU Features
    PPM ...............................: Enabled
    EIST ..............................: Enabled
    CxE................................: Disabled
    Execute Disable Bit ...............: Disabled
    Virtualization.....................: Disabled
    Hyper Threading ...................: Enable
    Active Processor Cores ............: All
    CPU QPI Latency ..............: Auto (i have tried 100)
    IOH QPI Latency ...............: Auto
    CPU QPI Drive Strength .......: Auto
    IOH QPI Drive Strength .......: Auto

    Memory Settings
    Memory Controller Settings
    IMC Configuration .................: Enabled
    Channel Congifuration .............: Independent
    Channel Interleaving ..............: 6 way
    Rank Interleaving .................: 4 way

    Memory Timings
    Extreme Memory Profile XMP ........: Disabled
    Memory Profile Select .............:
    DRAM Timing Control ...............: Manual
    tCL (CAS Latency) .................: 7T
    tRCG (RAS to CAS Delay) ...........: 8T
    tRP (RAS Precharge) ...............: 7T
    tRAS (Precharge Delay) ............: 20T
    CR (Command Rate) .................: 1T
    tRFC (Refresh Cycle Time) .........: 62T
    tWR (Write Recovery Time) .........: 6T
    tWTR (Write to Read Delay) ........: 14T
    tRRD (RAS to RAS Delay) ...........: 3T
    tRTP (Read to Precharge) ..........: 3T

    All Voltage Settings

    CPU Voltages
    CPU Core Voltage ..................: +270mV (not sure but in the neighborhood)
    CPU Target Core Voltage ...........: 1.4875V (VID =1.23)
    CPU Vdroop Compensation ...........: disabled
    CPU VTT (UnCore) Voltage ..........: +300mV
    1.8 PPL Voltage Setting ...........: 1.890V
    CPU Clock Amplitude Ctrl ..........: 0.900V

    Memory Voltages
    DRAM Voltage ......................: 1.65V
    DIMM1 Vref CA (Addresses) .........: x 0.500
    DIMM1 Vref DQ (Data) ..............: x 0.500
    DIMM2 Vref CA (Addresses) .........: x 0.500
    DIMM2 Vref DQ (Data) ..............: x 0.500
    DIMM3 Vref CA (Addresses) .........: x 0.500
    DIMM3 Vref DQ (Data) ..............: x 0.500

    Chipset Voltages
    X58 IOH Core Voltage .............: 1.22V
    X58 IOH VCCA 1.1V ................: 1.116V
    X58 IOH VCCA 1.5V ................: 1.506V
    ICH10 SB Voltage .................: 1.530V

    OC Gear : Skipping this part

    CPU Turbo .........................: Always On
    System Turbo ......................: Enabled

    Clock Speed Control Center
    CPU Bclock (FSB) ................: 211MHz
    QPI Link Fast Mode ..............: Enabled
    QPI Multiplier ..................: x18
    QPI Target Speed ................: 3798MHz (7.2GT/s)
    CPU Core Multiplier .............: x20 (21)
    CPU Core Target Speed ...........: 4226MHz (4436MHz)
    CPU Uncore Multiplier ...........: x16
    CPU Uncore Target Speed .........: 3388MHz
    Memory Bus Multiplier ...........: x8
    Memory Bus Target Speed .........: 1694MHZ
    PCI Express Bus Clock............: 100MHz

    I have tried 103MHz on pci-e bus and changing CPU QPI Latency to 100 but no boot up past 215 bclk. 214 boot at 1.56v but usb items start flickering. Keep in mind, I am not looking for stable settings just enough to run 3DMark Vatage and 06. Thx.
    Tried your settings although I reached 4.4 something ghz windows boot stable although it fails the intel burn test on max because I stop it due to the cores spiking to 92C on a CM V8 I still need parts for my water loop. :-( Although I will have the same block as you when I get powdercoating straightened out. Two of the parts were powdered red. I'm taking the Powder coater to court though LOL Did a terrible job as seen in my work log in my sig.

    So back to the drawing board. I was hoping to get close to 4.5 on air stable as this chip is said to be a 4.7ghz+ chip on mild water. What ever mild water means. I can't get the guy to pm me back now after he got my money. LOL At least the chip works.
    Quote Originally Posted by SkItZo View Post
    Any worklog of the girl in your avatar?
    HEAT
    EBAY

    Project Slumber Parties aka PSP Liquid Cooling Work Log

  23. #123
    Xtreme Enthusiast
    Join Date
    Oct 2009
    Location
    Arlington, TX
    Posts
    576
    I can set it at 220 x20 which is 21 with it locked with cxe turned off idle 45c windows bootable at 4621.4 MHz mem @ 1761MHz vcore 1.552 Wish I could cool it more with this CM V8 its turned to max though :-( DAMN THE LUCK. Not enough volts somewhere though I just tryed the standard test and it locked up on me. :-(
    Quote Originally Posted by SkItZo View Post
    Any worklog of the girl in your avatar?
    HEAT
    EBAY

    Project Slumber Parties aka PSP Liquid Cooling Work Log

  24. #124
    Registered User
    Join Date
    Jun 2008
    Posts
    39
    cascade cooling
    Attached Images Attached Images

  25. #125
    Registered User
    Join Date
    May 2009
    Location
    GERMANY
    Posts
    22
    Fantastic Bclk, never seen such high on a BR before and also nice CPU...

    Didn't know that setfsb is working now with Bloodrage!
    DESKTOP:
    Lian Li V1020B/ ..::FOXCONN BLOODRAGE::..
    Core I7 920 D0 @ 21x200 / Corsair 6GB DDR3-1600 / 2x Zotac GTX580 3 GB @SL! / 1x Crucial C300 256 GB / 2x Seagate momentus XT / 1x WD 2000 GB / Enermax Platimax 1200W / Win 7 64
    Wakü: Watercool Heatkiller 3.0 / MO-RA 4x180 LT / Watercool Heatkiller GPU-X³ Laing DDC-1Plus @ Aquaero

    LAPTOP:
    Clevo (Guru) M860TU 15,4"@1680x1050 / intel Q x9200 ES 2,4 GHz / nVidia 260m GTX / 4GB DDR3-1066

Page 5 of 6 FirstFirst ... 23456 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •