CPU & Batch (Core i7 920 D0 3844A934)
RAM Model (OCZ 3x1GB 1600MHz CL7)
Bios Ver: Quantum BIOS (G25)
CPU Features
PPM : Enabled
EIST : Enabled
CxE : Disabled
Execute Disable Bit : Enabled
Virtualization : Enabled
Hyper Threading : On
Active Processor Cores : All
Memory Settings
Memory Controller Settings
IMC Configuration : Enabled
Channel Congifuration : INDEPENDENT
Channel Interleaving : 6 WAY
Rank Interleaving : 4 WAY
Memory Timings
Extreme Memory Profile XMP : Disabled
DRAM Timing Control : Manual
tCL (CAS Latency) : 6
tRCG (RAS to CAS Delay) : 6
tRP (RAS Precharge) : 6
tRAS (Precharge Delay) : 16
CR (Command Rate) : 92
All Voltage Settings
CPU Voltages
CPU Core Voltage : + 130MV
CPU Target Core Voltage : 1.1** Wrong Reading, actual 1.41
CPU Vdroop Compensation : Enabled
CPU VTT (UnCore) Voltage : + 220MV
1.8 PPL Voltage Setting : 1.897
CPU Clock Amplitude Ctrl : 800
Memory Voltages
DRAM Voltage : 1.81 (because of VTT)
DIMM1 Vref CA (Addresses) : x0.500
DIMM1 Vref DQ (Data) : x0.500
DIMM2 Vref CA (Addresses) : x0.500
DIMM2 Vref DQ (Data) : x0.500
DIMM3 Vref CA (Addresses) : x0.500
DIMM3 Vref DQ (Data) : x0.500
Chipset Voltages
X58 IOH Core Voltage : 1.30
X58 IOH VCCA 1.1V : 1.26
X58 IOH VCCA 1.5V : 1.6
ICH10 SB Voltage : 1.506 Default
OC Gear
CPU Turbo : Always On
System Turbo : Enabled
Clock Speed Control Center
CPU Bclock (FSB) : 211
QPI Link Fast Mode : Enabled
QPI Multiplier : 18x
QPI Target Speed : 3798
CPU Core Multiplier : 20
CPU Core Target Speed : 4220 (21x211=4431)
CPU Uncore Multiplier : 12x
CPU Uncore Target Speed : 2532
Memory Bus Multiplier : 6x
Memory Bus Target Speed : 1266
CPU Clock Skew : 500ps
IOH Clock Skew : 300ps
Stable for 1024M Wprime & 32M SuperPI. WaterCooled.
any suggestions? should i try P08 bios? cant go higher than 215 :|
Bookmarks