X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 1 of 6 1234 ... LastLast
Results 1 to 25 of 134

Thread: Foxconn BloodRage Shared BIOS Settings

  1. #1
    Xtreme Member
    Join Date
    Apr 2004
    Posts
    170

    Foxconn BloodRage Shared BIOS Settings

    Greets folks here's your place for bios settings using BloodRage pls share your bios setting using this format this will be helpfull for all of us thx for taking time to share

    CPU & Batch (XXX)
    RAM Model (XXX)
    Bios Ver: Quantum BIOS (XXX)


    CPU Features
    PPM :
    EIST :
    CxE :
    Execute Disable Bit :
    Virtualization :
    Hyper Threading :
    Active Processor Cores :
    Memory Settings
    Memory Controller Settings
    IMC Configuration :
    Channel Congifuration :
    Channel Interleaving :
    Rank Interleaving :
    Memory Timings
    Extreme Memory Profile XMP :
    Memory Profile Select :
    DRAM Timing Control :
    tCL (CAS Latency) :
    tRCG (RAS to CAS Delay) :
    tRP (RAS Precharge) :
    tRAS (Precharge Delay) :
    CR (Command Rate) :
    tRFC (Refresh Cycle Time) :
    tWR (Write Recovery Time) :
    tWTR (Write to Read Delay) :
    tRRD (RAS to RAS Delay) :
    tRTP (Read to Precharge) :
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage :
    CPU Target Core Voltage :
    CPU Vdroop Compensation :
    CPU VTT (UnCore) Voltage :
    1.8 PPL Voltage Setting :
    CPU Clock Amplitude Ctrl :
    Memory Voltages
    DRAM Voltage :
    DIMM1 Vref CA (Addresses) :
    DIMM1 Vref DQ (Data) :
    DIMM2 Vref CA (Addresses) :
    DIMM2 Vref DQ (Data) :
    DIMM3 Vref CA (Addresses) :
    DIMM3 Vref DQ (Data) :
    Chipset Voltages
    X58 IOH Core Voltage :
    X58 IOH VCCA 1.1V :
    X58 IOH VCCA 1.5V :
    ICH10 SB Voltage :
    OC Gear : Skipping this part
    CPU Turbo :
    System Turbo :
    Clock Speed Control Center
    CPU Bclock (FSB) :
    QPI Link Fast Mode :
    QPI Multiplier :
    QPI Target Speed :
    CPU Core Multiplier :
    CPU Core Target Speed :
    CPU Uncore Multiplier :
    CPU Uncore Target Speed :
    Memory Bus Multiplier :
    Memory Bus Target Speed :
    CPU Clock Skew :
    IOH Clock Skew :
    Last edited by ProStock; 04-22-2009 at 06:56 AM.

  2. #2
    I am Addicted!
    Join Date
    Feb 2006
    Posts
    1,772
    Thanks. are we still working on making a template for this? I would love to share, but as you read in my thread I dont know what I am doing, LOL

  3. #3
    Xtreme Member
    Join Date
    Aug 2006
    Posts
    110
    Well I have just reached 200Mhz, and it seems stable so far. I would like to share as soon as the template is uploaded.
    BloodRage
    i7 930
    XFX HD5870
    OCZ 6GB
    Zalman 850w PSU
    CM Stacker 830 silver
    2x 1TB Barracuda HDD
    Asus Xonar DX2

  4. #4
    I am Addicted!
    Join Date
    Feb 2006
    Posts
    1,772
    Quote Originally Posted by Villainstone View Post
    Well I have just reached 200Mhz, and it seems stable so far. I would like to share as soon as the template is uploaded.
    just copy and paste what he has above and fill it in, lol. I need you settings NOW! J/K but I do need serious help. I cant even get 180

  5. #5
    Xtreme Mentor
    Join Date
    Sep 2007
    Location
    Dallas
    Posts
    4,466
    Mine:
    Quantum BIOS (P06)

    CPU Features
    PPM : Enabled
    EIST : Enabled
    CxE : Disabled
    Execute Disable Bit : Disabled
    Virtualization : Disabled
    Hyper Threading : Enabled
    Active Processor Cores : All
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Congifuration : Independent
    Channel Interleaving : 6 way
    Rank Interleaving : 4 way
    Memory Timings
    Extreme Memory Profile XMP : Disabled
    Memory Profile Select : Auto
    DRAM Timing Control : By SPD
    tCL (CAS Latency) :
    tRCG (RAS to CAS Delay) :
    tRP (RAS Precharge) :
    tRAS (Precharge Delay) :
    CR (Command Rate) :
    tRFC (Refresh Cycle Time) :
    tWR (Write Recovery Time) :
    tWTR (Write to Read Delay) :
    tRRD (RAS to RAS Delay) :
    tRTP (Read to Precharge) :
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +110mv
    CPU Target Core Voltage : 1.28500 Actual is 1.36v
    CPU Vdroop Compensation : Enabled
    CPU VTT (UnCore) Voltage : +180mv Actual is 1.31v
    1.8 PPL Voltage Setting : 1.8v
    CPU Clock Amplitude Ctrl : 0.800v
    Memory Voltages
    DRAM Voltage : 1.65v Actual is 1.66v
    DIMM1 Vref CA (Addresses) : .500
    DIMM1 Vref DQ (Data) : .496
    DIMM2 Vref CA (Addresses) : .500
    DIMM2 Vref DQ (Data) : .500
    DIMM3 Vref CA (Addresses) : .500
    DIMM3 Vref DQ (Data) : .500
    Chipset Voltages
    X58 IOH Core Voltage : 1.30v
    X58 IOH VCCA 1.1V : 1.307v
    X58 IOH VCCA 1.5V : 1.506v
    ICH10 SB Voltage : 1.506v
    OC Gear : Skipping this part
    CPU Turbo : Enabled
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 200
    QPI Link Fast Mode : Enabled
    QPI Multiplier : x18
    QPI Target Speed : 3605Mhz
    CPU Core Multiplier : x19
    CPU Core Target Speed : 3806Mhz
    CPU Uncore Multiplier : x16
    CPU Uncore Target Speed : 3208Mhz
    Memory Bus Multiplier : x8
    Memory Bus Target Speed : 1604Mhz
    CPU Clock Skew : 0ps
    IOH Clock Skew : 0ps
    __________________
    CPUID http://valid.canardpc.com/show_oc.php?id=484051
    http://valid.canardpc.com/show_oc.php?id=484051
    http://valid.canardpc.com/show_oc.php?id=554982
    New DO Stepping http://valid.canardpc.com/show_oc.php?id=555012
    4.8Ghz - http://valid.canardpc.com/show_oc.php?id=794165

    Desk Build
    FX8120 @ 4.6Ghz 24/7 / Asus Crosshair V /HD7970/ 8Gb (4x2Gb) Gskill 2133Mhz / Intel 320 160Gb OS Drive, WD 256GB Game Storage

    W/C System
    (CPU) Swiftech HD (GPU) EK HD7970 with backplate (RAM) MIPS Ram block (Rad/Pump) 3 x Thermochill 120.3 triple rads and Dual MCP355's with Heatkiller dual top and Cyberdruid Prism res / B*P/Koolance Compression Fittings and Quick Disconnects.

  6. #6
    Xtreme Member
    Join Date
    Apr 2004
    Posts
    170
    here's a setting i have been able to grab from Google Cache Posted BY CHAWKS2


    Mine:
    Quantum BIOS (P06)

    CPU & Batch: i7 920 - 3837A898
    CPU Features
    PPM : Enabled
    EIST : Disabled
    CxE : Disabled
    Execute Disable Bit : Disabled
    Virtualization : Disabled
    Hyper Threading : Enabled
    Active Processor Cores : All
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Congifuration : Independent
    Channel Interleaving : 6 way
    Rank Interleaving : 4 way
    Memory Timings
    Extreme Memory Profile XMP : Disabled
    Memory Profile Select : Manual
    DRAM Timing Control :
    tCL (CAS Latency) :
    tRCG (RAS to CAS Delay) :
    tRP (RAS Precharge) :
    tRAS (Precharge Delay) :
    CR (Command Rate) :
    tRFC (Refresh Cycle Time) :
    tWR (Write Recovery Time) :
    tWTR (Write to Read Delay) :
    tRRD (RAS to RAS Delay) :
    tRTP (Read to Precharge) :
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +260mv
    CPU Target Core Voltage :
    CPU Vdroop Compensation : Disabled
    CPU VTT (UnCore) Voltage : +60mv
    1.8 PPL Voltage Setting : 1.8v
    CPU Clock Amplitude Ctrl :
    Memory Voltages
    DRAM Voltage : 1.65v
    DIMM1 Vref CA (Addresses) :
    DIMM1 Vref DQ (Data) :
    DIMM2 Vref CA (Addresses) :
    DIMM2 Vref DQ (Data) :
    DIMM3 Vref CA (Addresses) :
    DIMM3 Vref DQ (Data) :
    Chipset Voltages
    X58 IOH Core Voltage :
    X58 IOH VCCA 1.1V :
    X58 IOH VCCA 1.5V :
    ICH10 SB Voltage :
    OC Gear :

    CPU Turbo : Disabled
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 210
    QPI Link Fast Mode : Enabled
    QPI Multiplier : Auto
    QPI Target Speed :
    CPU Core Multiplier : x20
    CPU Core Target Speed :
    CPU Uncore Multiplier : x12
    CPU Uncore Target Speed :
    Memory Bus Multiplier : x6
    Memory Bus Target Speed :
    CPU Clock Skew : 0ps
    IOH Clock Skew : 0ps

  7. #7
    Xtreme Member
    Join Date
    Aug 2006
    Posts
    110
    Bios Ver: Quantum BIOS (P07)

    CPU Features
    PPM :Enabled
    EIST :Enabled
    CxE : Disabled
    Execute Disable Bit :
    Virtualization :
    Hyper Threading : Disabled
    Active Processor Cores :All
    Memory Settings
    Memory Controller Settings
    IMC Configuration :
    Channel Congifuration :
    Channel Interleaving :6-way
    Rank Interleaving :4-way
    Memory Timings
    Extreme Memory Profile XMP :OFF
    Memory Profile Select :OFF
    DRAM Timing Control :SPD
    tCL (CAS Latency) :7
    tRCG (RAS to CAS Delay) :7
    tRP (RAS Precharge) :7
    tRAS (Precharge Delay) :16
    CR (Command Rate) :1
    tRFC (Refresh Cycle Time) :
    tWR (Write Recovery Time) :
    tWTR (Write to Read Delay) :
    tRRD (RAS to RAS Delay) :
    tRTP (Read to Precharge) :
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage :+120mv
    CPU Target Core Voltage :1.42
    CPU Vdroop Compensation :Enabled
    CPU VTT (UnCore) Voltage :+240mv
    1.8 PPL Voltage Setting :1.82
    CPU Clock Amplitude Ctrl :.8
    Memory Voltages
    DRAM Voltage :1.65
    DIMM1 Vref CA (Addresses) :.5
    DIMM1 Vref DQ (Data) :.5
    DIMM2 Vref CA (Addresses) :.5
    DIMM2 Vref DQ (Data) :5
    DIMM3 Vref CA (Addresses) :.5
    DIMM3 Vref DQ (Data) :.5
    Chipset Voltages
    X58 IOH Core Voltage :1.28
    X58 IOH VCCA 1.1V :1.125
    X58 IOH VCCA 1.5V :1.506
    ICH10 SB Voltage :1.506
    OC Gear : Skipping this part
    CPU Turbo :OFF
    System Turbo :ON
    Clock Speed Control Center
    CPU Bclock (FSB) :200Mhz
    QPI Link Fast Mode :
    QPI Multiplier :18
    QPI Target Speed :
    CPU Core Multiplier :19
    CPU Core Target Speed :3.8GHz
    CPU Uncore Multiplier :16
    CPU Uncore Target Speed :3208MHz
    Memory Bus Multiplier :8
    Memory Bus Target Speed :1604MHz
    CPU Clock Skew :0
    IOH Clock Skew :0
    BloodRage
    i7 930
    XFX HD5870
    OCZ 6GB
    Zalman 850w PSU
    CM Stacker 830 silver
    2x 1TB Barracuda HDD
    Asus Xonar DX2

  8. #8
    Xtreme Member
    Join Date
    Feb 2009
    Posts
    265
    What sort of temps are you peeps getting on your IOH/northbridge ?

  9. #9
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    My NB says 46°C. After removing chipset cooler and using MX-2 thermal grease. That one before was totaly dry.. Tough, not sure if it helped.

    I guess that NB/IOH depends on voltages and except higher VTT (which probably doesn't effect NB/IOH) I have everything at stock.
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  10. #10
    Xtreme Cruncher
    Join Date
    Mar 2005
    Posts
    911
    Quantum BIOS (P06)

    CPU Features
    PPM : Enabled
    EIST : Disabled
    CxE : Disabled
    Execute Disable Bit : Disabled
    Virtualization : Disabled
    Hyper Threading : Enabled
    Active Processor Cores : All
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Configuration : Independent
    Channel Interleaving : 6 way
    Rank Interleaving : 4 way
    Memory Timings
    Extreme Memory Profile XMP : Enabled
    Memory Profile Select : Auto
    DRAM Timing Control : By SPD
    tCL (CAS Latency) :
    tRCG (RAS to CAS Delay) :
    tRP (RAS Precharge) :
    tRAS (Precharge Delay) :
    CR (Command Rate) :
    tRFC (Refresh Cycle Time) :
    tWR (Write Recovery Time) :
    tWTR (Write to Read Delay) :
    tRRD (RAS to RAS Delay) :
    tRTP (Read to Precharge) :
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +60mv
    CPU Target Core Voltage : 1.235
    CPU Vdroop Compensation : Enabled
    CPU VTT (UnCore) Voltage : +80mv
    1.8 PPL Voltage Setting : 1.8v
    CPU Clock Amplitude Ctrl : 0.800v
    Memory Voltages
    DRAM Voltage : 1.65v
    DIMM1 Vref CA (Addresses) : .500
    DIMM1 Vref DQ (Data) : .500
    DIMM2 Vref CA (Addresses) : .500
    DIMM2 Vref DQ (Data) : .500
    DIMM3 Vref CA (Addresses) : .500
    DIMM3 Vref DQ (Data) : .500
    Chipset Voltages
    X58 IOH Core Voltage : 1.20v
    X58 IOH VCCA 1.1V : 1.125v
    X58 IOH VCCA 1.5V : 1.506v
    ICH10 SB Voltage : 1.530v
    OC Gear : Skipping this part
    CPU Turbo : Enabled
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 200
    QPI Link Fast Mode : Enabled
    QPI Multiplier : x18
    QPI Target Speed : 3605Mhz
    CPU Core Multiplier : x16
    CPU Core Target Speed : 3205Mhz
    CPU Uncore Multiplier : x16
    CPU Uncore Target Speed : 3205Mhz
    Memory Bus Multiplier : x8
    Memory Bus Target Speed : 1604Mhz
    CPU Clock Skew : 0ps
    IOH Clock Skew : 0ps
    Bloodrage || 920 @ 3.2Ghz || TRUE Black
    3x 2GB HyperX 2000 || @ 2000Mhz 7.7.7
    2x 300GB WD VR Raid 0 || 2x 2TB Samsung F3 Raid 0
    LG 10x BD-R || LG 22x DVD/RW
    MSI GE 470 || LG 246WP
    Sonar X-Fi || Klipsch 5.1
    Lycosa || Mamba || Exact Mat
    CM ATCS 840 || Seasonic M12D
    Server 2008 R2 x64

  11. #11
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Oxford (England)
    Posts
    191
    Quote Originally Posted by Villainstone View Post
    Bios Ver: Quantum BIOS (P07)


    CPU Voltages
    CPU Core Voltage :+120mv
    CPU Target Core Voltage :1.42
    Villain i noticed you got your core temp at 1.42, is that for 24/7 use? I mean is it safe to stay at 1.42 for 24/7, i always thought 1.36 was the limit.

    Az

  12. #12
    Registered User
    Join Date
    Jan 2009
    Posts
    14
    Bios Ver: Quantum BIOS P06

    CPU Features
    PPM: Disabled
    EIST :Enabled
    CxE :Auto
    Execute Disable Bit :Enabled
    Virtualization :Enabled
    Hyper Threading :Enabled
    Active Processor Cores :All
    Memory Settings
    Memory Controller Settings
    IMC Configuration :enabled
    Channel Congifuration :Independent
    Channel Interleaving :6 way
    Rank Interleaving :4way
    Memory Timings
    Extreme Memory Profile XMP: Disabled
    Memory Profile Select :auto
    DRAM Timing Control :by SPD
    tCL (CAS Latency) :auto
    tRCG (RAS to CAS Delay) :auto
    tRP (RAS Precharge) :auto
    tRAS (Precharge Delay) :auto
    CR (Command Rate) :auto
    tRFC (Refresh Cycle Time) :auto
    tWR (Write Recovery Time) :auto
    tWTR (Write to Read Delay) :auto
    tRRD (RAS to RAS Delay) :auto
    tRTP (Read to Precharge) :auto
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage :+210mV
    CPU Target Core Voltage : 1.37250
    CPU Vdroop Compensation :Enabled
    CPU VTT (UnCore) Voltage :+180mV
    1.8 PPL Voltage Setting :1.800V
    CPU Clock Amplitude Ctrl :0.800V
    Memory Voltages
    DRAM Voltage :1.65V
    DIMM1 Vref CA (Addresses) :x o.500
    DIMM1 Vref DQ (Data) :x o.500
    DIMM2 Vref CA (Addresses) :x o.500
    DIMM2 Vref DQ (Data) :x o.500
    DIMM3 Vref CA (Addresses) :x o.500
    DIMM3 Vref DQ (Data) :x o.500
    Chipset Voltages
    X58 IOH Core Voltage :1.30V
    X58 IOH VCCA 1.1V :.108V
    X58 IOH VCCA 1.5V :1.506V
    ICH10 SB Voltage :1.506V
    OC Gear : Skipping this part
    CPU Turbo :
    System Turbo :
    Clock Speed Control Center
    CPU Bclock (FSB) :200MHz
    QPI Link Fast Mode :Enabled
    QPI Multiplier :Auto
    QPI Target Speed :3605MHz
    CPU Core Multiplier :x20
    CPU Core Target Speed :4006MHz
    CPU Uncore Multiplier :Auto
    CPU Uncore Target Speed :3208MHz
    Memory Bus Multiplier :Auto
    Memory Bus Target Speed : 1604MHz
    CPU Clock Skew :ops
    IOH Clock Skew :0ps
    CPU: Intel I7 920 C0
    Mobo: Foxconn Bloodrage
    RAM: Corsair Dominator 6Gb PC 12800
    GPU: ATI Sapphire 4870 x2 X2
    PSU: Corsair HX1000
    Case: Cosmos S
    Cooling: Water Cooling - dual loop

  13. #13
    Xtreme Member
    Join Date
    Aug 2006
    Posts
    110
    Quote Originally Posted by azza21 View Post
    Villain i noticed you got your core temp at 1.42, is that for 24/7 use? I mean is it safe to stay at 1.42 for 24/7, i always thought 1.36 was the limit.

    Az
    Intel state that 1.55v is the maximum safe voltage for i7.
    BloodRage
    i7 930
    XFX HD5870
    OCZ 6GB
    Zalman 850w PSU
    CM Stacker 830 silver
    2x 1TB Barracuda HDD
    Asus Xonar DX2

  14. #14
    Registered User
    Join Date
    Jul 2008
    Location
    MN
    Posts
    36
    I am looking for ssome help to get my 920 to 3.8 - 4 GHz. I have tried a few of the templates above but none of them seem to get my computer to boot. I get a Blinking dash after the initial hardware screen.
    I am using Bios P07

    I would like my ram to run at it's rated speed of 1600.

    I am also pretty confused by VTT. I have heard people say I shouldn't go above +200 but I see people using +300 so any hep or advice will be greatly appreciated.

    System Specs
    Core i7 920 Air cooled
    Bloodrage GTI
    6GB DDR3 OCZ 1600
    EVGA GTX 260
    300GB velociRaptor Drive (OS/Games)
    640GB Black caviar (Storage)
    Last edited by Legacy; 06-10-2009 at 11:40 AM.
    System specs:

    Cosmos S
    Asus Maximus II formula (Bios 0901)
    Corsair Domminator 4GB TWIN2X4096-8500C5DF
    Q9450 @3.6 (Zalman CNPS 9500)
    8800GTS 512(G92)
    74GB Raptor, 250GB WD
    OCZ 620 Watt SLI
    Creative XtremeGamer pro
    Vista Ultimate 64

  15. #15
    Registered User
    Join Date
    Oct 2008
    Location
    Centralia, PA
    Posts
    4
    deleted until i share safer settings
    Last edited by whatsthatsmell; 08-19-2009 at 12:47 AM.
    [E8500][TRU120 w/120mm fan][OCZ gold 4x2gb pc2-6400][GA-X48-DS4][WD1500AHFD(OS+Games) WD5000AAKS(media files)][2x Visiontek HD 4870's Crossfired][X-Fi Xtreme Gamer][Silverstone Decathlon 850w][Cooler Master 690][Mojave Ultimate 64-bit sp1][Sceptre X20WG Naga]

  16. #16
    Xtreme Member
    Join Date
    Aug 2007
    Posts
    175
    K, still think I can push this baby quite a bit more, just havent had time. However, figured I would offer my 8H Linx stable settings etc. .

    Foxconn "BloodRAGE" Bios P06 Settings
    CPU BATCH - 3845B027
    CPU Revision - D0


    QUANTUM BIOS

    BCLK(FSB) - [205]
    CPU Turbo - [Enabled]
    SYS Turbo - [Enabled]
    QPI Link Fast Mode - [Enabled]
    QPI Multi - [Auto]
    CPU Core Multi - [x20]
    CPU Uncore - [x16] <= {stability = MBM x 2 = CPU Uncore}
    Memory Bus Multi - [x8]
    CPU Clock Skew - [0ps]
    IOH Clock Skew - [0ps]

    -CPU FEATURES

    -PPM - [Enabled]
    -EIST - [Enabled]
    -CxE - [Disabled]
    -EDB - [Enabled]
    -Virtualization - [Enabled]
    -HT - [Enabled]
    -APC - [ALL]
    -Memory Settings

    -IMC - [Enabled]
    -Channel Config - [Independent]
    -Channel Interleave- [6 way]
    -Rank Interleave- [4 way]
    -Virtual XMP - [Disabled]
    -DRAM - [By SPD]
    VOLTAGE SETTINGS

    -CPU Core - [+130mv]
    -CPU Vdroop - [Enabled]
    -CPU VTT - [+180mv]
    -1.8 PLL - [1.8]
    -DRAM - [1.65]
    Foxconn "BloodRAGE" Bios P06 Settings
    "The only solid piece of scientific truth about which I feel totally confident is that we are profoundly ignorant about nature...It is this sudden confrontation with the depth and scope of ignorance that represents the most significant contribution of 20th century science to the human intellect."
    -Lewis Thomas, The Medusa and the Snail

    "The best definition we have found for civilization is that civilized man does what is best for all, the savage does what is best for himself."
    -Edwin Hubble

    H.E.A.T
    MarioKart FID-0774-5798-8330

  17. #17
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    default = not touched

    settings for 4,2GHz - 210 BCLK
    board number 209, with Bloodrage name between dimm slots

    CPU & Batch (i7 920 - C0 - 3838A758)
    RAM Model (G.Skill NQ 1600 CL9)
    Bios Ver: Quantum BIOS (P08)


    CPU Features
    PPM : Disabled
    EIST : Disabled
    CxE : Disabled
    Execute Disable Bit : Disabled
    Virtualization : Disabled
    Hyper Threading : Disabled
    Active Processor Cores : Yes
    Current Override: Enabled (or what is that setting, you'll know when you see it)

    Memory Settings
    Memory Controller Settings
    IMC Configuration : Default
    Channel Configuration : Default
    Channel Interleaving : Default
    Rank Interleaving : Default

    Memory Timings
    Extreme Memory Profile XMP : Disabled
    Memory Profile Select : Default
    DRAM Timing Control : Manual
    tCL (CAS Latency) : 9
    tRCG (RAS to CAS Delay) : 9
    tRP (RAS Precharge) : 9
    tRAS (Precharge Delay) : 24
    CR (Command Rate) : 1
    tRFC (Refresh Cycle Time) : 92
    tWR (Write Recovery Time) : Auto
    tWTR (Write to Read Delay) : Auto
    tRRD (RAS to RAS Delay) : Auto
    tRTP (Read to Precharge) : Auto

    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +290mV
    CPU Target Core Voltage : 1.55V (not safe on air)
    CPU Vdroop Compensation : Enabled
    CPU VTT (UnCore) Voltage : +500mV (not safe on air - safe is 1.5V on air)
    1.8 PPL Voltage Setting : 1.8V
    CPU Clock Amplitude Ctrl : 1.000
    Memory Voltages
    DRAM Voltage : 1.7V (cause high VTT)
    DIMM1 Vref CA (Addresses) : Default (0.5000 I think)
    DIMM1 Vref DQ (Data) : Default
    DIMM2 Vref CA (Addresses) : Default
    DIMM2 Vref DQ (Data) : Default
    DIMM3 Vref CA (Addresses) : Default
    DIMM3 Vref DQ (Data) : Default
    Chipset Voltages
    X58 IOH Core Voltage : 1.3V
    X58 IOH VCCA 1.1V : 1.3V (around)
    X58 IOH VCCA 1.5V : 1.6V
    ICH10 SB Voltage : 1.5V (default)

    OC Gear : Skipping this part

    CPU Turbo : Disabled
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 210
    QPI Link Fast Mode : Enabled
    QPI Multiplier : 18x
    QPI Target Speed : 3780
    CPU Core Multiplier : 20x
    CPU Core Target Speed : 4200
    CPU Uncore Multiplier : 12x
    CPU Uncore Target Speed : 2520
    Memory Bus Multiplier : 6x
    Memory Bus Target Speed : 1260
    CPU Clock Skew : 0 (or try 200)
    IOH Clock Skew : 0 (or try 100)

    Or reverse CPU Clock Skew 100 and IOH 200. Worked for me when trying to reach 220+ BCLK.

    When I had ram/uncore on low speed, I could reach 210 BCLK with only +100mV (quite low CPU speed ofc 17x210).

    One of most important settings in order to reach high BCLK for me was tRFC setting in memory section .. I must up it to 92 to be able to run 200+ .. you can push it up 511 if you are lazy to find working minimum. Ofc it can be memory dependant, but I'm kinda convinced, that you are not setting only memory but also IMC..
    Last edited by Mescalamba; 06-17-2009 at 06:20 AM.
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  18. #18
    Registered User
    Join Date
    Jun 2009
    Posts
    17
    Well here is my attempt at overclocking......
    920 Do stepping watercooled,B batch chip , reaper ddr3 1800

    HOPE THIS HELPS SOMEONE

    CPU FEATURES
    PPM = DISABLED
    EXEC BIT =ENABLED
    VIRTULIZATION =ENABLED
    HYPERTHREADING =ENABLED
    ACTIVE PROC CORES =ALL

    **********************************


    **********************************

    MEMORY SETTINGS
    ----------------------------

    IMC =ENABLED
    CHANNEL CONFIG =INDEPENDENT
    CHANNEL INT =6 WAY
    RANK INT =4 WAY
    **********************************
    MEMORY TIMMING
    ----------------------
    VIRTUAL XMP =DISABLED
    DRAM TIMMING =BY SPD
    --------------------------------------------

    ALL VOLTAGE SETTINGS

    CPU CORE VOLTAGE =+60MV
    CPU TARGET CORE VOLTAGE =1.00375
    CPU VDROOP COMPENSATION =ENABLED
    CPU VTT (UNCORE) VOLTAGE =+80MV
    1.8 PLL VOLTAGE SETTING =1.800V
    CPU CLOCK AMPLITUDE =0.800V

    ***********************************

    MEMORY VOLTAGES

    DRAM VOLTAGE =1.65
    DIM REF = ARE ALL SET TO X 0.500

    ********************************************

    CHIPSET VOLTAGES
    -------------------------

    X58 IOH CORE VOLTAGE = 1.10V
    X58 VCCA 1.0V = 1.108V
    X58VCCA 1.5V =1.506V
    X58 IOH SB VOLTAGE =1.506

    ************************************

    OC GEAR
    -----------

    CPU TURBO =ENABLED
    SYSTEM TURBO =ENABLED

    ---------------------------------

    CLOCK SPEED CONTROL CENTRE
    --------------------------------

    CPU BCLOCK (FSB) =200 MHZ
    QPI LINK FAST MODE =ENABLED
    QPI MULTYPLIER =AUTO
    QPI TARGET SPEED =3605 MHZ (7.2 GT/S)
    CPU CORE TARGET SPEED =4006 MHZ
    CPU CORE UNCORE MULTIPLYER =AUTO
    CPU UNCORE TARGET SPEED =3208 MHZ
    MEMORY BUS TARGET SPEED =1604 (DDR3 1604)
    CPU CLOCK SKEW =OPS
    IOH CLOCK SCEW =OPS
    ************************************************** ********
    SORRY GUYS LONG WINDED
    BUT THESE SETTINGS USEING A d0 920 SHOULD PRODUCE CPU 4.0 GHZ SPEED
    CPU TEMP MIN 30 DEGREES MAX 57 DEGREES...AND NORTH BRIDGE TEMP 35 DEGREES.......WITH CPU VOLTAGE 1.21... CPU VTT 1.25....AND MEMORY 1600 (7-7-7-16......I AM USEING OCZ REAPER 1800)
    BEARING IN MIND I USE A WATERCOOLING SYSTEM

    ANYWAY HOPE THIS HELPS SOMEONE....REGARDS MAL1954

  19. #19
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    MAL1954 - CPU TARGET CORE VOLTAGE = 1.00375?? If yes you have bent pins or sumthing.. no way it can be so low..
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  20. #20
    Registered User
    Join Date
    Jun 2009
    Posts
    17
    Hi Mescalamba that worried me for a bit.....running everest and cpu-z it shows up as 1.21 core voltage, which i think is correct as the supposidly max voltage that intel advise for the 920 do stepping chip is 1.225 volts not like the C o variety that is 1.36, when i run the board at 266 ghz cpu-z reports that the core voltage is 0.98 in idle at 32 degrees, when under prime95 will hit 1.269 max and 57 degrees, anyway heres hoping and when i run it at 4.3ghz the cpu voltage on cpu-z = 1.31......mal1954
    Last edited by mal1954; 06-26-2009 at 08:02 AM.

  21. #21
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    Quote Originally Posted by mal1954 View Post
    Hi Mescalamba that worried me for a bit.....running everest and cpu-z it shows up as 1.21 core voltage, which i think is correct as the supposidly max voltage that intel advise for the 920 do stepping chip is 1.225 volts not like the C o variety that is 1.36, when i run the board at 266 ghz cpu-z reports that the core voltage is 0.98 in idle at 32 degrees, when under prime95 will hit 1.269 max and 57 degrees, anyway heres hoping and when i run it at 4.3ghz the cpu voltage on cpu-z = 1.31......mal1954
    Maybe some BIOS bug or CPU isn't correctly reporting voltage.. C0 and D0 have same 1.25 vCore. If I were you, I would check it with multimeter (there are voltage reading pads up above ram slots). But probably its fine..

    4,3GHz at 1.31 is very nice..
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  22. #22
    Registered User
    Join Date
    Jun 2009
    Posts
    17
    thanks mescalamba ...come to think about it i have read somewhere about reports some people had with wrong readings cant remember where and it also springs to mind that one of the bios updates fixes this problem, must have a good read again to find out where..but apart from that it runs like a dream 24/7 and has never messed around, must admit these new do steps are amazing, theres Korben43 on XCPU rinning his DO chip at 4.6ghz 1.456v .... dominator 2000 running at 2200 nand 2 x gtx295 a beast of a machine...once again thanks for your good solid advice speak again ..mal1954
    Last edited by mal1954; 06-26-2009 at 08:52 AM.

  23. #23
    Xtreme Addict
    Join Date
    Nov 2008
    Location
    Heart of Europe
    Posts
    1,992
    Quote Originally Posted by mal1954 View Post
    thanks mescalamba ...come to think about it i have read somewhere about reports some people had with wrong readings cant remember where and it also springs to mind that one of the bios updates fixes this problem, must have a good read again to find out where..but apart from that it runs like a dream 24/7 and has never messed around, must admit these new do steps are amazing, theres Korben43 on XCPU rinning his DO chip at 4.6ghz 1.456v .... dominator 2000 running at 2200 nand 2 x gtx295 a beast of a machine...once again thanks for your good solid advice speak again ..mal1954
    I guess that G25 fixes that.. not sure tough.. maybe try P08 if you don't run it already..

    But really if it works and its only reading.. don't worry about it.

    And yes, great mobo.. one of best I ever had. I'll keep one until I die. Could be nice tombstone..
    i7 930 D0 - 4,2 GHz + Megashadow
    3x4GB Crucial 1600MHz CL8
    Foxconn Bloodrage rev. 1.1 - P09
    MSI HAWK N760
    Crucial M500 240GB SSD
    SeaGate ES.2 1TB + 1TB External SeaGate
    Corsair HX 850W (its GOLD man!)
    ASUS STX + Sennheiser HD 555 (tape mod)

    Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr

  24. #24
    Xtreme Enthusiast
    Join Date
    Apr 2008
    Posts
    849
    G25 is great, running that now. BTW, is it possible to undervolt on the BR? Negative mV adjustments would be nice...although that's technically not what the board was designed for

    • i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
    • Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
    • OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
    • HTC Incredible - Uber Kingdom Revolution ROM


  25. #25
    Registered User
    Join Date
    Jun 2009
    Posts
    17
    nice to hear from you YMMA, yes we have heard of under volts recently from korben43 when he was clocking the 975 cpu, i know you are well use to overclocking by your posts on other sites but for now i will stick with p06 bios as i am very comfortable with it untill i get a bit more experienced on overclocking, as i am still a noob at it and really dont know what i am doing, but i read loads and am learning things all the time from the greatest community of them all "the blood rage gang" consisting of all people who love this great board...P.S.i am now trying to get some cash back in the bank as my system has skinned me when i do have a good cash backup i have got loads of settings i would love to try, but i need to be in the position if things go wrong i can replace parts, then we will find out even more what this beauty can do...
    Last edited by mal1954; 06-26-2009 at 11:12 AM.

Page 1 of 6 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •