plz help me whit a problem,i tri to oc my skulli

**skulstation** · 03-16-2009, 11:58 AM

i have problem whit my skulli.
it runs fine at stock and lower but if i try to oc it a bit its not stabel.
it boot @4ghz but 3Dmark dont finich.
Vcore @ 1,4v
al the rest @ stock
temp @ 4 ghz ar low 60°c

this ar the specs for the rest of the system
2 zalman 9500 stock temps 45 °c max
2x QX9775
intel D5400XS
4x1 fsb 667mhz kingstone
1 WD3200AAJS
1 dvd-read
1 dvd-rw
1 asus ati 3870 top
cooler master UCP 900W

what dos this messegs meens.

**skulstation** · 03-17-2009, 04:01 AM

plz help me to find a solution for my problem.
the problem strats to pop up 3.7Ghz even Vcore @ 1.4, it boots Vcore @ stock .
if i khan reatch 4Ghz on air i gone put a wc on it.if not the system gone be at stock for the rest of is live.

zo plz help to find my goal of 4Ghz on air befor wasting monny on wc parts for a stock system

**suprafill** · 03-17-2009, 06:47 AM

I've just learned myself that 101 code means you need more vcore

**skulstation** · 03-18-2009, 01:02 AM

thx.but iz it ok to go above 1,4 on air whit temps @ 60°c full load

**suprafill** · 03-18-2009, 08:30 AM

I don't know about your chip but i have an i7 and push it 1.435, but its under water. i wish i could help you further.

**skulstation** · 03-18-2009, 10:39 AM

thx suprafill for you replay.

plz khan anibadi whit the qx9775 post the save max Vcore and max temp.
what whil be the best air cooler to upgraid the zalman9500. it dozent fit normal on the second cpu

my cpu's ar slany 3746b608 - 3574706 - 1a0300 and the other is slany 3746b608 - 3574706 - 1b1468

**skulstation** · 03-20-2009, 12:55 AM

pzl help, how khan i fix it.
1,45Vcore i khan do Wprime 32M and 1024M but 3dmark vantage fails at the physics test.
somtimes i got,hardware stop cal your hardware vendor or the pich in my other post
the temp @1,45Vcore ar low 60°c at full load

**skulstation** · 03-20-2009, 07:36 AM

i just did it.a kompleet run of 3dmark vantage at 4G whit vcore 1,5 but the temps on air ar realy hi.
ar those tmeps ok for this speed whit my zalman coolers

http://www.hwbot.org/result.do?resultId=834015

low temp
cpu 1 / core 0 = 23°c , core 1 = 23°c , core 2 = 35°c , core 3 = 35°c
cpu 2 / core 0 = 42°c , core 1 = 36°c , core 2 = 41°c , core 3 = 41°c
max temp
cpu 1 / core 0 = 58°c , core 1 = 54°c , core 2 = 56°c , core 3 = 54°c.
cpu 2 / core 0 = 68°c , core 1 = 64°c , core 2 = 64°c , core 3 = 62°c