I have a Asus P6T Deluxe with a 920 i7 & corsair dominator 1600MHz memory. Does anyone have a template of their bios settings to overclock to at least 3.6GHz?
right now I can't get much past 3.4 without it locking up on me. Thanks for all your help!
I have a Asus P6T Deluxe with a 920 i7 & corsair dominator 1600MHz memory. Does anyone have a template of their bios settings to overclock to at least 3.6GHz?
right now I can't get much past 3.4 without it locking up on me. Thanks for all your help!
All I do is
XMP profile OC
manually specify multiplier
specify BCLK (can go to about 215)
Drop QPI voltage from 1.4 down to 1.3-1.35
Specify RAM speed (make sure its not too high really don't see much going from 1200 to 1520 so I use 1200 for 24/7).
Specifiy Vcore (1.075 @ 3.6 / 1.145 @ 3.8 / 1.225 @ 4)
I can prime at 3.8 with HT on or 4.0 off and only because it gets too hot.
What is this XMP? I have this as well, and I tend to just do manual profile.
Lian-Li Armorsuit PC-P80 Asus P6T Deluxe w/ OC Palm| TFC X-Changer 360 x2
Intel i7 965 Extreme Edition | Swiftech Apogee GTZ
Asus GTX 295 x 2 (Quad-SLi) | Koolance VID-NX295 x 2
Velociraptor 300GB | Swiftech MCP655 Pump x 2
G.SKILL PI Black 6GB | EK 250ml Reservoir
Tygon 7/16 Tubing | Enermax Revolution 85+ 1050w Fully Sleeved
Just pulls the extra settings from RAM. Notice I overide a few of those settings anyways.
ewitte you said to manually specify cpu ratio setting,? what to?
Hmm... I'll give it a try when I get home. I have a small fear of overclocking and burning something out when it comes to voltages.
Lian-Li Armorsuit PC-P80 Asus P6T Deluxe w/ OC Palm| TFC X-Changer 360 x2
Intel i7 965 Extreme Edition | Swiftech Apogee GTZ
Asus GTX 295 x 2 (Quad-SLi) | Koolance VID-NX295 x 2
Velociraptor 300GB | Swiftech MCP655 Pump x 2
G.SKILL PI Black 6GB | EK 250ml Reservoir
Tygon 7/16 Tubing | Enermax Revolution 85+ 1050w Fully Sleeved
19 and 20 mostly. The 21 multiplier doesn't like to be stable. Will try it more when I switch over to water.
install the 1303 bios
The 21x is now selectable for the 920 retail version
Except it still drops to 20x under very heavy loads (LinX), even with C1E, SpeedStep and TM function all disabled. Then, since 20x is more unstable than 21, the system will usually crash.Originally Posted by linuxfueled
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
Posting Permissions
Reply With Quote
Bookmarks