s0lid, you are awesome. this is a great build log, keep up the good work and keep feeding us those pictures!!
i take it you are an electrical and/or computer engineer?
s0lid, you are awesome. this is a great build log, keep up the good work and keep feeding us those pictures!!
i take it you are an electrical and/or computer engineer?
Intel Core 2 Quad Q9450 Yorkfield @ 3.2GHz | Asus P5Q Deluxe mobo | 2x OCZ Reaper HPC 4GB (2 x 2GB) DDR2 1066 (PC2 8500) | Sapphire 4870x2 | Western Digital VelociRaptor 300GB 10k RPM | Intel 120GB SSD | Western Digital Caviar SE16 640GB 7200 RPM | Hitachi 2TB 7200 RPM | PCP&C 750W Power Supply |Cooler Master HAF932 | Windows 7 64-bit | Dell ULTRASHARP 2408WFP 24-inch Widescreen Flat Panel Monitor
Join Us in the XS World Community Grid Forum & Help Fight Cancer and Other Diseases
Studying digital electronics atm, and well, computers are just for hobby =)Originally Posted by Rise
Thx for kind words.
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
More pics...
But damn it one part didn't come out as i wanted
Since getting rad in there is kinda tight fit there were no other options...
Not much todo anymore.
Little cabling job, sleeving and getting all parts in ^^
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
Well it's time to get this done ready
There isn't much work needed to be done:
Finish front panels cabling
Finish HDD/DVDs power cables
Install the parts
Final part list:
Athlon X2 7750 BE
Asus M3A76-CM (no HDMI but 10e cheaper than M3A78-CM)
4GB Corsair 800MHz XMS2
8800GT 512MB
160GB+250Gb
500W Nexus NX5000
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
Not 2 much hole between rad and fans?
~~~~~~~~water ed ~~~~~~~~~~
Sry 4 my english
http://galeriawc.pl
Well little update:
Did 10mm shroud for rad.
Not perfect but should direct most of the air flow into right place
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
nice keyboard :p
Yay parts:
Testing psu, nope haven't been tested before. Fans are attached with superglue, hopefully they'll last over the next weekend (lanparty \o/):
And pieces put together:
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
2 to lanparty :o
SRY my imagehost is currently offline due server software updates
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
Hmmm looks like i've forgot to add the finished pictures
Will add more later since i've changed GPU to HD3850.
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"
Looking good!
Here's a shot of the front panel power pinout from when I did my G5 mod. I just soldered to the middle and far pads, and didn't touch the closer of them (I marked the pads I needed to solder to with a sharpie).:
Here's my Build log in case you need any more idea's, though I think you pretty well have my mod beat.
I loved the G5 I modded so much that I am getting another one to mod this Christmas break, possibly with watercooling, and some other goodies.
Core I7 920 4.2 ghz (21x200) 1.35 volts / Asus P6T / Corsair XMS 1333mhz @ 1600mhz / EVGA GTX 285 SSC (724 core/1634 shaders / 1508 mem) / Modified ThermalTake Armor
Swiftech Apogee, MCW-60, Swiftech 655, Black Ice GTX 360
Posting Permissions
Reply With Quote
Bookmarks