So, I'm just finishing rebuilding my LC system. I took everything apart, added a bunch of new stuff, etc. Only problem is, when I hook the fans back up to my Kaze Master, and flip the power switch, the display doesn't turn on. It was working before, and had for a while. Is there something I'm missing? Note, it will control the fan speed, but I get no read-out while it does so.
Last edited by DeathWalking; 03-02-2009 at 08:48 AM.
but fans work?
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
Are you sure that after connecting fans you turned knobs to right [max rpm]. I know it should say OFF instead of just being blank but it happened to me and "activating" fans helped.
Oops, didn't notice you've said that the fans work.
So.... "Have you tried turning it off and on again"
Last edited by Hidetaka; 03-02-2009 at 09:02 AM.
E6550 2,33GHz @ 3,5 GHz || HD4850 714/1104 || 2x1GB OCZ PC-8500 @ 1000MHz
Abit IP-35-e || Amacrox 450W PSU|| Max. sig. size is 500x250 pix, isn't yours bigger?
Cooled by: Apogee GT || MCW-60 || MCP655 || BW Extreme 123 rev. 2 || MCres
ah, fan works
i had exactly same issue
their power coonnectors in molex (5v) r real crap, just check it
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
Works perfectly now, thanks!Originally Posted by rioja
ah, fan works
i had exactly same issue
their power coonnectors in molex (5v) r real crap, just check it
Mine had the same issue, however how do I fix this molex issue?
Lian-Li Armorsuit PC-P80 Asus P6T Deluxe w/ OC Palm| TFC X-Changer 360 x2
Intel i7 965 Extreme Edition | Swiftech Apogee GTZ
Asus GTX 295 x 2 (Quad-SLi) | Koolance VID-NX295 x 2
Velociraptor 300GB | Swiftech MCP655 Pump x 2
G.SKILL PI Black 6GB | EK 250ml Reservoir
Tygon 7/16 Tubing | Enermax Revolution 85+ 1050w Fully Sleeved
pin in those molex is just unplugged itself, i use a zip tie to somehow bind it
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
You might have a loose female pin. Think the 5vdc is for the logic in the controller/screen. You can close the pin with a teeny screwdriver. If the pin is pushing out on the back of the molex, pull the pin out and bend the retaining clips out a bit, or replace the pin and plug completely. You can buy a molex pin kit and if you want to splurge, a pin removal tool. An even bigger splurge is a molex crimper tool. Small pliers work as well tho.
http://www.performance-pcs.com/catal...ndex&cPath=174
It's working, so I'd deal with it next time, hehe.
Last edited by Conumdrum; 03-02-2009 at 08:33 PM.
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
Posting Permissions
Reply With Quote
Bookmarks