SpeedFan 4

[stasio]

SpeedFan 4.38 beta 10

This beta includes support for new hardware. It adds full support for Intel QST, AMCC/3WARE raid controllers, more Analog Devices chips, more VIA and nVidia SMBuses and Intel i7 core temperatures. It contains several bug fixes and improvements. Support for Windows 7 (both 32 and 64 bit) has been fully verified.

[Knight]

Thanks for posting.

My version has the fans running at 100% every time I get out of sleep. It is just annoying to have to lower it back down to what I had it originally. Is this problem due to user error or the software's fault?

Might this beta help?

[stasio]

SpeedFan 4.38 Beta 13

Adds full support for Intel QST, AMCC/3WARE raid controllers, more Analog Devices chips, more SiS, VIA and nVidia SMBuses, Intel i7 core temperatures and more DELL systems. It fixes ITE 8720F identification too. It contains several bug fixes and improvements. Support for Windows 7 (both 32 and 64 bit) has been fully verified.

[stasio]

SpeedFan 4.38 beta14

[stasio]

SpeedFan 4.39 Beta 7

Completely rewritten SMART hard disk access routines. Now it works even with drivers that use SCSI MINIPORT. Please, visit the SMART tab, select any hard disk. If supported, two buttons (EXTENDED and SHORT TEST) should appear. Press any of them and a non-destructive hard disk test will be performed by the hard disk itself. Press the refresh button to see the process status.
Added support for new chips (like the Fintek F71889F and the Winbond W83795G) and improved support for other ones. In order to run this beta, simply install SpeedFan 4.38, then replace the EXE and then run SpeedFan as usual.

[stasio]

SpeedFan 4.39

-added full support for Fintek F71889F, even at unusual addresses
-added support for a new method to access SMART data
-added support for SCSI and SAT hard disk SMART access
-added full support for SuperMicro PWS-865-PQ PSU
-added full support for Winbond W83795G
-added full support for SMSC EMC1402
-added SHORT and EXTENDED OFF-LINE SMART TEST in SMART tab. This feature works on a number of supported interfaces and not on all of them
-added voltage readings for Winbond W83793G
-properly read Tjmax on Core i7 based Xeons
-relabeled IT8512F to IT8512E
-the tray hint is no longer updated if ShowStaticIcon is true
-the tray icon tooltip layout is now vertical
-added Fintek F72569DG detection

[chispy]

Tx for the heads up stasio .

[stasio]

SpeedFan 4.40 beta 3

Greatly improved Winbond W83667HG support. Improved CPU identification. Included all Tjmax values published by Intel. In order to run this beta, simply install SpeedFan 4.38, then replace the EXE and then run SpeedFan as usual

[stasio]

SpeedFan 4.40 Beta 5

Beta 5 improves CPU identification and corrects a few minor bugs.

[stasio]

SpeedFan 4.40

http://www.almico.com/speedfan440.exe

-improved identification of Winbond W83667HG
-W83667HG has its own support code now
-W83667HG PWM MODE settings now work properly and can be used to change fan speeds
-fixed a minor bug in temperature readings of EMCT03
-fully included data from TPWS002 Intel Document about Tjmax values
-added support for ADP3228 fan reading
-AdvSmart no longer links a drive if SMART data has bad checksums

[AndrewZorn]

ive never actually been able to change fan speeds with speedfan. thanks for the update. trying once again...
EDIT nope

[RossT]

I just completed the build below (workstation) and am having a problem with trottling of the CPU fan (120 mm, 2000 rpm). The BIOS Smart speed settings don't seem to work and neither does Speedfan. Any suggestions?


EVGA P55FTW|i5-759@4000MHz|Megahalems|Enermax Infinity 720W|Lian Li 1010B|4GB Geil Evoone 2133|Asus 8600GT Silent|LG L245WP|

[stasio]

SpeedFan 4.41 Beta 3

https://dl.dropbox.com/u/4668167/sfbeta%20b3.zip

Beta 3 adds full support for Intel 5 Series and Intel 3400 Series SMBus and avoids linking USB hard disks that are still not supported.
In order to run this beta, simply install SpeedFan 4.40, then replace the EXE and then run SpeedFan as usual.

[stasio]

SpeedFan 4.41 beta 5

Beta 5 fixes a typo in CONFIGURE dialog, improves Tjmax identification for Core i3, i5 and i7, adds full support for Fintek F71889F, fixes CONFIGURE / EVENTS OK button glitch (now, when you press UPDATE, you will have the OK button immediately enabled) and speeds up program startup on Asus P5N-D.

[stasio]

SpeedFan 4.41 Beta 7

http://www.fileden.com/files/2009/12...17/sfbeta7.zip

Beta 7 adds full support for new chips, adds full support for Intel QST 2.x, adds support for fan speed changing on Intel QST 1.x and 2.x. Events now can check SMART attributes from Areca, AMCC/3ware and Advanced Smart access mode and can check SMART Fitness and Performance values too. Set Intel Atom Series 300 Tjmax to 90C. Added more names for SMART attributes. I need reports about all of these new features, mainly from systems using Intel QST and from users of events.In order to run this beta, simply install SpeedFan 4.40, then replace the EXE and then run SpeedFan as usual.

[stasio]

SpeedFan 4.41 Beta 9

http://www.fileden.com/files/2009/12...17/sfbeta9.zip

-Intel
QST 1.x support is now fully verified and full control over fan speeds is available.

[stasio]

SpeedFan 4.41 Beta 11

http://www.fileden.com/files/2009/12...7/sfbeta11.zip

Full Intel QST support. Support for new hardware and some fixes. This will be the last beta before 4.41 Final.
The ACPI TABLES TOOL has been updated.

[biohead]

^ "runtime error 217 at 004dca14"

running win 7 pro x64.

[Mad Ad]

same error, same OS, installs sometimes, but after a reboot or two throws the 217 error and wont work till its reinstalled, then is ok for a reboot or three, then up comes the error/crash

[stasio]

SpeedFan 4.41 Beta 13

http://www.almico.com/sfbetaprogram.php

Beta 13 adds support for W83667HG and greatly improves Intel QST support (including fan speed changing). I need your reports, especially from boards with Winbond and Nuvoton Chips.
In order to run this beta, simply install SpeedFan 4.40, then replace the EXE and then run SpeedFan as usual.

[stasio]

SpeedFan 4.41

http://www.almico.com/speedfan441.exe

4.41 - added full support for Intel 5 Series/3400 Series SMBus
- added full support for Intel QST 2.x
- added full support for fan control for Intel QST
- added full support for Fintek F71889F
- added full support for Fintek F71889ED
- added full support for SB8x0 SMBus
- added full support for Nuvoton W83677HG-I
- added full support for Nuvoton W83667HG-B
- added SB7xx/8xx PM2 fan speed readings and fan control
- added full support for MCP98242
- added full support for CAT34TS02
- added support for ITE IT8721F
- added support for USB hard disk enclosures with Cypress chipset
- added W83791D advanced settings for PWM MODEs
- improved ADT7490 PWM MODE advanced settings
- added ADVANCED options for Fintek F75387 PWM MODEs
- fixed Fintek F75387F PWM setting
- enabled SMBus on Intel ICH9-M, if needed
- added detection of LIS331DL
- added Intel QST 2.x advanced option to revert back to AUTO fan control
- upon resume from suspend only those fans that are automatically variated are initially set to 100%
- identified more CPUs
- Intel Atom Series 300 Tjmax set to 90C
- HECI support works only on Windows 2000 and later
- AMCC/3ware support works only on Windows 2000 and later
- added more names for SMART attributes
- added a new option to CONFIGURE / OPTIONS to disable SMART Summary Error Log on program start (this can dramatically improve SpeedFan startup time)
- the UI is now updated whenever new SMART data is read from the selected hard disk
- now, in CONFIGURE / EVENTS, when you press UPDATE to change some event, the editing fields are automatically cleared and the OK button is automatically enabled
- restored access to SMART attributes on AdvSmart, Areca and AMCC/3ware connected drives in Event configuration window
- events can now react to FITNESS and PERFORMANCE values of SMART hard disks
- added NOADVSMARTSCAN command line switch
- the first line of the email sent by an EVENT now has been changed to include the Machine Name

[stasio]

SpeedFan v4.42

http://www.almico.com/installspeedfan442.exe

- greatly improved nVidia video card support
- added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
- improved Intel QST support
- Intel QST now checks first for 2.0, then falls back to 1.0, if needed
- added support for external USB drives using JMicron controllers
- fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
- MUTEXes used to synchronize with other tools while accessing buses are now defined Global
- fixed CPU usage bars size on the main window
- enabled SMBus access on ICH10 and ICH10R, if needed
- if SpeedFan service is unavailable, a message dialog is shown and the program stops running
- added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
- SEND REPORT now includes a list of ACPI devices found

[stasio]

SpeedFan v4.45

http://www.almico.com/speedfan445.exe

- added full support for ATI RADEON video cards (including CrossFire configurations and fan control)
- completely rewritten DELL support
- DELL support is now enabled on a wider range of models
- added full support for ITE IT8772F
- added support for Fintek F71889A
- added full support for SMSC EMC2103-1 and SMSC EMC2103-2
- added support for Fintek F71869AD
- added support for Fintek F71862 at unusual addresses
- preliminary support for SMSC SCH5317
- fixed Nuvoton W83627DHG-P PWM MODE advanced settings
- fixed ASUS ATK0110 readings on several motherboards
- fixed ATK0110 support on some Asus motherboards
- enabled SMBus on Intel ICH9M-E, if needed
- added full AMD Hudson-2 SMBus support
- TACPISonySensor support is now probed on all SONYs
- fixed multiple glitches and bug related to Advanced Fan Control UI
- in Advanced Fan Control dialog, control points can be fine tuned (+1,-1,+10,-10) using the right mouse button
- SMART Fitness synthetic value now is more stringent with some specific issues, reporting 0% in some cases that require immediate attention

[stasio]

SpeedFan v4.46

http://www.almico.com/installspeedfan446.exe
http://www.almico.com/sfdownload.php

- greatly improved DELL support
- nVidia I2C support works again with driver 275+
- now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit)
- added support for Intel X79 (Patsburg) SMBus
- added support for ServerWorks HT1000 SMBus
- added SAT support for USB enclosures
- added support for USB enclosures using SunPlus, IoData and Logitech chipsets
- added voltage reading tweaks and configurations for several Intel motherboards
- added full support for Fintek F71858AD
- rewritten Areca RAID support and improved support for Areca SAS controllers
- slightly refactored hard disk USB vendor guessing
- added support for AMD Family 12h (LLano) temperature
- added support for AMD Family 14h (Bobcat) temperature
- ATK0110 tries to find the best interface when multiple ones are available in ACPI BIOS (please, report if support is broken for your motherboard model)
- added preliminary support for Fujitsu-Siemens Hades

[FlanK3r]

nice Stasio!