I've tried many times to get turbo mode always on but it always blue screens me. (So long as it's enabled I BS.)

I've tried all kinds of voltages and bclock/multi settings. It literally blue screens every time.

Not even 133/12 lol.
I'm sort of at a loss. I have the same issue with 20x multiplier so long as the bclock is over 201 and the multi is 20x I blue screen on boot up.
I can boot into windows stable at 20x by 200bcl but I always crash within the first 20 seconds of prime.

[ Voltage wise for 19/200 (3.8ghz/1600mhz) This is completely stable.
I run
+70 vcore
+200VTT
1.65 vdimm
all other settings default. ]

I usually go like,
+140 vcore
+200vtt
1.65vdimm when 20/200 1.72vdimm when 19/211 or 18/220.
and all other stock accept IOH at 1.120v when I'm trying to hit 4ghz.

But be it 19/211 or 20/200 or 18/220 or just any random combo to try to hit 4ghz I can never stay stable.

I'm not the most experienced in overclocking so I might very well be setting everything up wrong.

This is all on G13 bios.


(Temps are fine up to around +1.45mhz vcore then I'm load around 85-90c)