Too lazy to read through this thread, my BFG GTX 275 says no suck luck with your regulator, It's a reference board. Are 275s not supported?
Too lazy to read through this thread, my BFG GTX 275 says no suck luck with your regulator, It's a reference board. Are 275s not supported?
Figured out how to get it set up with my 4870 now overvolting a bit... I'll let you know how much gain I get once I test it out a little bit...
Thanks for the guide!
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
well i tried again on my GTX 260 core 216's. i still have to set the voltage on both cards (i dont get the option to set both cards) i set the voltage to 1.1125v and the cards too 750/1500/1060. run atitool for half an hour no problem but if i try 3dmark06 it locks up. i think the ovp and ocp are beening activated.
My PC's
The Gamer
EVGA 790i FTW
E8400 EO 3GHz @ 4 GHz 1.28v
2 x 1GIG G.Skill 1778MHz 7-8-7-18 with fan
2 x 500GIG Seagate HDD 32MEG Cache in stripped raid
2 x Zotac GTX 260 core 216's in SLI OC'ed
1 x Asus Sata DVD Burner with Light Scribe
Thermaltake 1200 Watt PSU
Thermaltake Armor LCS
Custom H2O
Swiftech GTZ
EK on mobo (mosfets, north & southbridge)
EK Full cover GTX 260 blocks with ram back plates
2 x swiftech MCP-655 Pumps
2 x Swiftech Micro Res ver 2
My LAN Box
Asus P5Q PRO
E8400 CO @ 4GHz 24/7 Stable 1.4v (Win) & 3.825GHz 24/7 Stable 1.29v (Win) for Summer lol
Thermaltake Blue Orb
2 x 1GIG Dominator 1066 with fan @1069 5-5-5-15
500 GIG Seagate 32MEG Cache
Palit 4870 Sonic Dual in Turbo Mode
i-Cute 850 Watt PSU
Antec 300 Case
And The Rest
2 x G15 Keyboards
2 x G9 Mice
Logitech x-540 Speakers
Asus 22' LCD Wide Screen for Home
LG 19' LCD Wide Screen For LAN
Seems like a great program, couldn't get my 4870 to do anything with the air cooler though, going to attempt to get more clocks out of a WCed GTX 280 now.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
I am using RT 2.24 and the updated plug-in to clock my 4870X2. (Catalyst 9.8 Vista 64)
I can get it to work in RT and change the VRM V of both GPUs. I manually OC the clocks via RT then apply the VRM V change. The problem is that even the slightest bump in VRM V will cause lock-ups in 3D apps. The odd thing is, that it hangs even at clock settings which I can run properly without increasing VRM V.
Card is under EK waterblock and temps are very low.
840 core runs fine with no VRM V increase, if I increase the VRM V one notch (from 1.2625 to 1.2750) it locks up at 840 core!! Any ideas? Tried going higher up to 1.4 with no luck.
Q6600 G0
GIGABYTE P35-DQ6 - ASUS MAXIMUS RAMPAGE
2x2GB G.SKILL F2-8000CL5D-PQ - 2x1G CORSAIR DOMINATOR XMS2-8500C5D -2X1GB PATRIOT PC2-9600 C5
8800ULTRA - X1900XTX -HD4870X2
TOUGHPOWER 1200W
---
Awesome Plugin works on my Visiontek 4870 but i have a problem, i dont know how to setup the Parameters to load when windows load etc, i know you said to do it in scheduler but i cant figure it out, can someone help me
Parameters: /sd4294967295 /wi1,70,18,44
thats what mine is when in 3d mode and 1.300v
anyone know how? i tried searching but seems nobody explains how to do it, please lol i have to keep setting it everytime =[
Last edited by redrumy3; 08-23-2009 at 10:49 AM.
STEAM
Corsair H80
i5 2500K 4.5Ghz 1.33v
8GB GSkill Sniper DDR3-1600 1.25v
Gigabyte Z68XP-UD3P F7 | XFX 6970 2GB
64GB Adata SSD | 2 x Seagate 7200.12 500GB Raid 0
Corsair 750TX | Asus Xonar Essence STX
Sennheiser HD-555 Mod | Asus VH242HL
Logitech G9x | Logitech G15v2
Corsair Vengeance C70 | Windows 8 Pro 64-Bit
STEAM
Corsair H80
i5 2500K 4.5Ghz 1.33v
8GB GSkill Sniper DDR3-1600 1.25v
Gigabyte Z68XP-UD3P F7 | XFX 6970 2GB
64GB Adata SSD | 2 x Seagate 7200.12 500GB Raid 0
Corsair 750TX | Asus Xonar Essence STX
Sennheiser HD-555 Mod | Asus VH242HL
Logitech G9x | Logitech G15v2
Corsair Vengeance C70 | Windows 8 Pro 64-Bit
May be you add support for Hd4770 or it's impossible?
Last edited by LRV; 08-27-2009 at 03:27 AM.
RuS.nnov
HI guys i am unable to increase the voltages for my 4870 x2 using rivatuner. I am using a reference gpu. The more button at the bottom left is blanked out.
I'll post the pictures
I open riva tuner it's the latest 2.2.4
Mine does not have the VRM instead it's called something else here:
I right click on it and enter setup:
This is what i'm talking about u see, the more at the bottom left is blanked out
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
oka another thing is i'm using latest drivers 9.9 and riva 2.24 does not support it.
I found the solution somewhere... Can't remember exactly what I did to fix it though...
The fix is there somewhere!
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Thanks for this. I installed the latest Rivatuner and copied the plugin .dll over last night. One thing that's worth mentioning is that I had to create a dword key and set it to 1 in Vista x64 since the executable registry file points to the regular location instead of the WOW32 node location. It seems strange that other x64 users claim that theirs works though....
@Aldonia:
I had the same problem before I manually created my registry key....let me know if you need the exact info, as I'm going to remote my home PC to test the voltage later. I'll post screens if you want.
Last edited by binormalkilla; 10-09-2009 at 11:51 AM.
Q6600 G0 @ 3.8 (475x8) 1.496V || ASUS Maximus Formula X38 || 4x2GB Geil Evo One DDR2-950 5-5-5-15 ||
Sapphire 4870X2 857/1000 || XSPC Delrin full coverage block || MCP655 || D-Tek Fuzion Nozzled ||
Black Ice 480GTX 8 120mm Yate Loon push/pull || Silverstone DA850 PSU 70A +12V || Auzentech Prelude ||
Vantage P15071 in Vista x64
Fantastic plugin and excellent guide as to how to use and set up.. It works great with my XFX HD4870x2 and I'm using the latest the ATi drivers.. Had a few problems installing with Vista 64 due to the non digitally signed drivers but all sorted and happily benching in Vantage at 850 on the gpu core and 980 on the mem.. Not much of a clock yet I know but will work it up !! Thanks again
Thread revival mode engaged....
Anyone happen to get this working with Asus Matrix GTX 285's?
I did not get the "unsupported hardware" message, but the only voltage graph that comes up is "Sensor supply voltage" with a value of 3.30
can u please help me?
the plugin works perfectly but after a little time the core voltage drops back to default under load :S . so if i set it t 1.275v and start vantage gt2- it runs about 30 seconds at 1.275v, and then drops back to default 1.2625v ...
dont know which is connected to. i thought gpu vrm temp, but under games it runs perfectly above 85c-and then during benchmarking it fails at about 75c. any ideas how can i keep the voltage at the raised level?
thanks
I7 920 D0 5362 1.627v
980X retail 3003A258 - 6683mhz 1.85v
ASUS R3X 265bclk
ASUS R3BE 266bclk
_______________________________________
Xtreme 3D Team Hungary
Just an added note, unless I missed something here's what I had to do:
After following instructions installing the plugin, the C++ package, etc... I had to go into SETUP when the Hardware Monitor was open, go to PLUG-INS, and enable the DLL file.
I've used this guide before a few months back and didn't have to do this then... but I did a new windows 7 x64 pro install on my SSDs a couple of weeks ago, so I had to re-install RivaTuner.
After enabling the DLL, all is good now... before it wasn't showing my VRM temps and voltages.
Question:
Is there a way to only alter the 3D voltages and not 2D? I hate running 3D overclocked voltages 24/7...
Last edited by g0dM@n; 04-07-2010 at 11:06 AM.
ASUS Crosshair V *Water* | FX-8150 Enzotech Sapphire CPU block | 8GB Mushkin 2133 | 6970 2GB | 240GB OCZ Vertex 3 | SB X-Fi Elite Pro | Corsair 520W Modular | 3x 26" Asus VW266H Eyefinity 5760x1200 | DDC pump with petra top @ 18w, Thermochill HE 120.3 w/ 3x120x38mm Deltas 152cfm on controller |
--------------------------------------------
My Heatware (1000+ flawless)
I think it is not possible. You can create to shortcuts with different parameters, but there's no elegant way.
Bookmarks