Any ideas would be helpful. I want it to look clean.
Please don't suggest cutting or drilling as I don't trust myself enough to cut its anodized finish.
Any ideas would be helpful. I want it to look clean.
Please don't suggest cutting or drilling as I don't trust myself enough to cut its anodized finish.
If you won't cut the case, then how bout hiding the cables behind the motherboard tray?
Codename [GOLIATH] - Lian-Li G70B
Loop 1 [D-Tek Fuzion - PA120.3 - 3xSan Ace 1011 - DDC2 w/Petra's top] Loop 2 [MCW60 - EK ASUS NB 5 - EK ASUS 4 SB - BI GTX240 - 2xSan Ace 1011- D5]
ASUS Maximus Formula - 8GB OCZ REAPER DDR2-8500 - Q6600 - EVGA GTX260 core 216 55nm - Silverstone ST75F
Codename [Black-Dragon] - Lian-Li PC65B
Loop [Dangerden TDX - BI GT240 Stealth - 2xYate loon SL - D5]
DFI NF4 Ultra-D - 2GB Teamgroup Croonus(5BF)@260MHZ - Opteron 165 CCBBE0616XPMW@2.88 GHZ- ATI X1900xt - Corsair HX520
Since they're force flex cables they can easily fit behind the motherboard (not the tray but between the board and tray).
Canon 5D Mark II (Canon 50mm f/1.2L | Canon 135mm f/2L | Canon 24-70mm f/2.8L | Contax Zeiss 85mm f/1.4 | Zuiko 21mm f/3.5 | Crumpler 7MDH | Hitech filters + Lee Foundation Kit | B+W filters)
Hasselblad 201F (Zeiss 80mm f/2.8 CF | 2x A12 Back | Domke F-4AF)
Nikon F3HP (Nikkor 50mm f/1.2 | Nikkor 55mm f/1.2)
Images: Flickr
there are holes in the back of the motherboard tray, use them
Last edited by Asgard_thor; 02-06-2009 at 09:54 PM.
FREEDOM ISN'T FREE
Cruncher Support:
Utnorris
DarthBeavis
DEFRANCO NATION
_____________
E6750@ 3.0ghz- evga 750i FTW- 320gb- Swiftech MCR220 compact- 8800gts 512mb KO- 620hx - 4gb Crucial 1066- CM 690- 6 yate loons
E6600- Asus striker Extreme-2 x 750gb- Igloo 5710- 8800gt- antec 850w Quatro- 4gb DDR2 800- Antec 1200- 24/7 cruncher
**Wishes for a dual- quad core cruncher **
hmmmm, well you can buy one with holes from performance-pcs.com
http://www.performance-pcs.com/catal...ducts_id=24014 Out of stock now, but it could be back at any time
Hmm my regular pc 80 has 4 slat holes placed at the back, strange how yours doesn't.
Anyways I had to cut two holes with a dremmel which did the trick now its nice and clean.
EVGA X58 Classified
Intel Core i7 980X @ 4ghz
EVGA 590 GTX x2 Quad SLI
Corsair Dominator DDR3 12GB PC3-12800C8
Western Digital 150 GB Velociraptor
Corsair AX1200
Asus Xonar Xense
Custom Watercooling
Lian Li Pc-P80 Armoursuit
Bookmarks