Cooler Master V10 Review

**<<HANNIBAL>>** · 02-04-2009, 01:18 AM

woow
That is a killer big heatsink, love the look of that
when will it be for sale?

**neo mike** · 02-04-2009, 01:45 AM

Man that thing is HUGE, its may be the best for temps, but to me its just way to big, covers up your whole board, whats the point of having a sexy board and ram, then have this thing hide it all, very nice review though.

**<<HANNIBAL>>** · 02-04-2009, 02:36 AM

Originally Posted by neo mike

Man that thing is HUGE, its may be the best for temps, but to me its just way to big, covers up your whole board, whats the point of having a sexy board and ram, then have this thing hide it all, very nice review though.

I think, when someone sees this monster, they will not ask you about RAM

**oohms** · 02-04-2009, 05:22 AM

This is a cooler i'd get

**Russian** · 02-04-2009, 08:47 AM

Originally Posted by <<HANNIBAL>>

woow
That is a killer big heatsink, love the look of that
when will it be for sale?

feb 17th in usa and march for rest of the globe

**Dubz** · 02-04-2009, 09:15 AM

fyi: i recently tested the v10 against the TRUE Copper on a i7 at 3.9 with 1.36 voltage accroding to CPU-Z. it did outperform the Copper by a couple of degree. but i want to do more testing before putting up the data. will have it tonight.

**benko** · 02-04-2009, 10:53 AM

so you will put results

2 fans on v10 are 3pin so with potenciometer you can change their speed??

**biglipzit** · 02-04-2009, 10:55 AM

The 2 fans are hooked in with a single 4 pin. Most motherboard will control the fan speed this way at different temps set in BIOS.

**<<HANNIBAL>>** · 02-04-2009, 01:01 PM

and when does V12 comes out?
or when will bey the review of the best V series

**benko** · 02-04-2009, 02:32 PM

Originally Posted by [cTx]biglipzit

The 2 fans are hooked in with a single 4 pin. Most motherboard will control the fan speed this way at different temps set in BIOS.

so i cannot connect them to my potenciometer??? stupid.

than i will change fans i need sillence in my pc.

**Vapor** · 02-04-2009, 02:38 PM

Originally Posted by benko

so i cannot connect them to my potenciometer??? stupid.

than i will change fans i need sillence in my pc.

You can...it's a 3+1 fan header (PWM fan header).

**Kain XS** · 02-04-2009, 02:56 PM

Is it very difficult to change the fans? I need a silent PC.
BTW, great review.

**evil-98** · 02-04-2009, 03:24 PM

instock @ PPCS

http://www.performance-pcs.com/catal...ducts_id=25091

**Riggs** · 02-05-2009, 07:57 PM

Nice! I want one!

**Kaleid** · 02-07-2009, 04:28 AM

Wow. I'm running the V8 passive on my e7200 @ 3600 (1.23v something) and I thought that was big.
Well, also have two 500rpm Scythe slipstreams taking out heat from the system..

Many coolers perform better without the duct. Could it be removed?

**oohms** · 02-07-2009, 07:21 AM

What are the dimensions of the TEC?

And has anyone tried bolting on a bigger one?

**Warboy** · 02-07-2009, 08:41 AM

Originally Posted by oohms

What are the dimensions of the TEC?

And has anyone tried bolting on a bigger one?

I suggested that to him earlier this morning on the CM forums.

**Russian** · 02-07-2009, 09:47 AM

Not quite sure, but i can find out.

**Logos** · 02-08-2009, 11:24 AM

not sure if that link has been posted before:
http://www.xbitlabs.com/articles/coo...aster-v10.html

I wish they had compared it to some Thermalright gear...but they didn't.

**Vapor** · 02-08-2009, 01:25 PM

Meh, roughly equal to a V8 or Baram at fairly high load...that's a pretty good perspective of what it can do :-/

**biglipzit** · 02-08-2009, 04:59 PM

V10 Update

Well I got rid of the temp TEC control unit and hooked the TEC up direct and had it running 100% all the time. Disappointing results... 18.7 Degrees C on the cold plate with NO load... Sad sad sad

Here are the pics and the results, Ask me what else you want to see. The 320 Watt TEC won't fit on the V10... That was disappointing, I may need to force it to fit...

Tested on the Phenom II system again with same overclock. 1.525 V core and 3.7GHz...

After dis assembly, I took apart the TEC plug and ran it directly to a 12 V rail, having it direct through an ammeter first.

Maximum amperage was right between 5.8 and 5.9 Amps putting it right at the 70 Watt range.

Performance

Well after lots of run time and prime 95 etc, I have decided that the TEC on at 100% only benefits idle temps really since on full load the TEC must have been running at 100% anyway.

Let me know what you guys think and even with no load there was no condensation. What is the largest 40mm TEC you can get cause that is what I would need to buy. My 320 Watt TEC is a 50mm and way too big.

Previous Results

New 100% TEC results

I really did expect more I guess......

**westsider** · 02-08-2009, 05:05 PM

Originally Posted by <<HANNIBAL>>

and when does V12 comes out?
or when will bey the review of the best V series

W16 maybe?
double vw v8

**Warboy** · 02-08-2009, 05:34 PM

Originally Posted by [cTx]biglipzit

V10 Update

-snip-

I just pre-ordered mine. I suggested the following to Russian.

http://www.frozencpu.com/products/24...tl=g30c105s187

http://www.jab-tech.com/Scythe-KAZE-...m-pr-3945.html

But we need to measure the TEC unit to see how big it is. So we can see how it would fit. also the fans should add a nice kick.

**dany74q** · 02-08-2009, 06:09 PM

Great review [cTx]biglipzit,any suggestions about V10/True 120 Copper+2 fans ?
honestly,I`d rather the true.

**Vapor** · 02-08-2009, 06:23 PM

Originally Posted by Warboy

I just pre-ordered mine. I suggested the following to Russian.

http://www.frozencpu.com/products/24...tl=g30c105s187

http://www.jab-tech.com/Scythe-KAZE-...m-pr-3945.html

But we need to measure the TEC unit to see how big it is. So we can see how it would fit. also the fans should add a nice kick.

Those fans are some 20% slower than stock fans....

Thread: Cooler Master V10 Review

Thread Tools

Search Thread

Rate This Thread

Display

nice

test

Bookmarks

Bookmarks

Posting Permissions