Page 5 of 5 FirstFirst ... 2345
Results 101 to 125 of 125

Thread: 241 bclk -Corsair HX1000W-EVGA X58 3X SLI-i7 920

  1. #101
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Ah good, Mr. 32M himself is here to the rescue.

    I would say step one is to increase the uncore even before going deep with the tweaking. It's a must to have it in the 4.2-4.5GHz range at least.

  2. #102
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Gautam View Post
    Ah good, Mr. 32M himself is here to the rescue.

    I would say step one is to increase the uncore even before going deep with the tweaking. It's a must to have it in the 4.2-4.5GHz range at least.
    that's what the ID says, don't forget it

    it doesn't matter how high your uncore is, if the basic OS tweaks aren't there, you'll still be as slow a Gautam...you know who's advice to take Ron, have i let you down yet?
    Last edited by 3oh6; 02-14-2009 at 02:39 PM.
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  3. #103
    /dev/zero
    Join Date
    Nov 2002
    Location
    Germany, Berlin
    Posts
    3,625
    lol^^ Pure fun!
    Xtremesystems.org
    i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.


  4. #104
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Quote Originally Posted by 3oh6 View Post
    that's what the ID says, don't forget it

    it doesn't matter how high your uncore is, if the basic OS tweaks aren't there, you'll still be as slow a Gautam...you know who's advice to take Ron, have i let you down yet?
    Oh no doubt, but the uncore can't be forgotten for 32M, that's all. And its an odd one because it basically helps nothing besides superpi. And as for the bclk, I'll be the first to admit I'm probably as bad at bclk clocking as I am at fsb clocking, which means a 6 year old could probably get it higher than me.

  5. #105
    Admin
    Join Date
    Mar 2003
    Location
    North Texas
    Posts
    5,551
    Quote Originally Posted by Gautam View Post
    Ah good, Mr. 32M himself is here to the rescue.

    I would say step one is to increase the uncore even before going deep with the tweaking. It's a must to have it in the 4.2-4.5GHz range at least.
    Quote Originally Posted by 3oh6 View Post
    that's what the ID says, don't forget it

    it doesn't matter how high your uncore is, if the basic OS tweaks aren't there, you'll still be as slow a Gautam...you know who's advice to take Ron, have i let you down yet?
    LMAO I love you guys thanks for helping.
    UNDER THE ICE .com
    Phase Change Cooling

    is the remedy

  6. #106
    Admin
    Join Date
    Mar 2003
    Location
    North Texas
    Posts
    5,551
    Okay - I followed Georges clocks and Jody's regedit instuctions. This looks better. I did disable explorer.exe also.
    Man that was easy
    I don't really understand what is going with the vcore. I had it set in bios at 1.6v and then raised it to 1.64 with eleet tool. And then it shows 1.7v in cpuz

    thanks guys
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	7m 55.35.JPG 
Views:	490 
Size:	131.0 KB 
ID:	94805  
    Last edited by runmc; 02-14-2009 at 07:34 PM.
    UNDER THE ICE .com
    Phase Change Cooling

    is the remedy

  7. #107
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by runmc View Post
    Okay - I followed Georges clocks and Jody's regedit instuctions. This looks better. I did disable explorer.exe also.
    Man that was easy

    thanks guys
    see i told you to ignore Gautam and you would be fine
    nice work Ron

    no here is the frequency goal for sub 8 min...and i am not even the fastest for this time slot

    click for full size including memset...
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  8. #108
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Quote Originally Posted by 3oh6 View Post
    see i told you to ignore Gautam and you would be fine
    I see his uncore went up by 800MHz as well.

  9. #109
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Gautam View Post
    I see his uncore went up by 800MHz as well.
    damn, i didn't even look. must have been a result of using George's advice. all i know is that you weren't mentioned...case closed
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  10. #110
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    You're getting feisty of late...seems like it's about time I step back in to the LLC with my new weaponry.

  11. #111
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    P.S. Ron, I have the same happening to me with vcore. I think it's the new BIOS doing it. It used to be that e-Leet set voltages were a little higher than what you'd get in reality.

    Based on the clocks I'm getting, I would actually trust CPU-Z. I think it's telling the truth, but something goofy is going on with e-Leet setting vcore.

    One more thing...disable hyperthreading for everything besides 06/Vantage/wPrime. Higher clocks and better efficiency.

  12. #112
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Gautam View Post
    You're getting feisty of late...seems like it's about time I step back in to the LLC with my new weaponry.
    Quote Originally Posted by Gautam View Post
    One more thing...disable hyperthreading for everything besides 06/Vantage/wPrime. Higher clocks and better efficiency.
    yeah, i am full of piss and vinegar today. i haven't been in the LCC for a while either. the guys in there are tearing it up like no ones business...i'm not even sure i can catch them.

    and yes, drop HT, bandwidth goes up and with it 32M efficiency. good tip Gautam, forgot about that one
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  13. #113
    Xtreme n00berclocker
    Join Date
    Mar 2006
    Location
    San Jose, CA
    Posts
    1,445
    Did you see that 3oh6 nub went to a DFI board. I mean really who uses a DFI board?
    Quote Originally Posted by 3oh6
    damn you guys...am i in a three way and didn't know it again
    Quote Originally Posted by Brian y.
    Im exclusively benching ECS from this point forward

  14. #114
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Gautam View Post
    You're getting feisty of late...seems like it's about time I step back in to the LLC with my new weaponry.
    LLC????????
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  15. #115
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Cpt.Planet View Post
    Did you see that 3oh6 nub went to a DFI board. I mean really who uses a DFI board?
    real men drive neon green with yellow racing stripes and you know it.

    Quote Originally Posted by Movieman View Post
    LLC????????
    Low Clock Challenge AKA LCC

    http://www.xtremesystems.org/forums/...d.php?t=167233

    bring it Dave...no fancy cooling needed, just SPi 32M/hardware maximizing skills
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  16. #116
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    my bad.

  17. #117
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by 3oh6 View Post
    real men drive neon green with yellow racing stripes and you know it.


    Low Clock Challenge AKA LCC

    http://www.xtremesystems.org/forums/...d.php?t=167233

    bring it Dave...no fancy cooling needed, just SPi 32M/hardware maximizing skills
    Skills? Me? Moi?..I think you have the wrong person..
    I'm still learning how to spell the word overclocking!
    BUT I do have a couple new toys to try out..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  18. #118
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Dave's toys always seem to come in pairs.

  19. #119
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Quote Originally Posted by Gautam View Post
    Dave's toys always seem to come in pairs.
    They sure do...


  20. #120
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    and they are the best damn looking twins i have seen
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  21. #121
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Quote Originally Posted by 3oh6 View Post
    yeah, i am full of piss and vinegar today. i haven't been in the LCC for a while either. the guys in there are tearing it up like no ones business...i'm not even sure i can catch them.
    Yeah, you're charts in the 2nd post desperately need an update
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  22. #122
    ¿
    Join Date
    Jul 2003
    Posts
    4,772
    Quote Originally Posted by 3oh6 View Post
    LargeSystemCache is in the registry and is a must to be enabled.
    For those that don't like regedit this works too



    On XP (this is enabled by default on Server OS) set memory usage to System Cache.

    Note: This is a 32M tweak only, do not use it for 3D benchmarking.

  23. #123
    Corsair Rep
    Join Date
    Apr 2004
    Posts
    1,203
    Ron, did you get similar results with the new board?
    Yes, Yellowbeard, a tall rough man with a big yellow beard

  24. #124
    Admin
    Join Date
    Mar 2003
    Location
    North Texas
    Posts
    5,551
    I'm a slow learner here Yellowbeard Peter is giving me a Classy Education. I'm having some hdw problems also that I'm chasing at the moment. I would love to have some big results with this board.
    UNDER THE ICE .com
    Phase Change Cooling

    is the remedy

  25. #125
    Xtreme Member
    Join Date
    May 2007
    Location
    Corsica
    Posts
    355


    My records

    WR-DDR2-805Mhz Dual channel
    WR Q6600-5018.57mhz


Page 5 of 5 FirstFirst ... 2345

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •