Results 1 to 13 of 13

Thread: destroyer

  1. #1
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,943

    destroyer

    i just looked up a review of this board and they say 8 phase pwm can you confirm saaya

    also whats the highest vcore allowed in the bios and does all the sliders in ntune work with this mb

    thanks
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  2. #2
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    34,549
    i dont think all sliders work, but ask fatalbert
    ntune isnt... perfect :P
    it cant be compared to amds overdrive... its a shame that overdrive only works on amd chipsets...
    supposedly an older beta is floating around that works on destroyer, but that was before my time and i dont know about that...

    highest vcore is 1.7v, back then for am2 that was more than enough and the board has ovp implemented inside the pwm chips, which apparently cant be bypassed :/
    but for daneb 1.7v is more than enough for air and even water afaik, its only on ln2 that you need 1.9v to fully max out the chip from what ive seen.

    oh and its 5 phase, not 8 phase!

  3. #3
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,943
    thanks
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  4. #4
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    Poland / Rypin
    Posts
    865
    Quote Originally Posted by saaya View Post
    i dont think all sliders work, but ask fatalbert
    ntune isnt... perfect :P
    it cant be compared to amds overdrive... its a shame that overdrive only works on amd chipsets...
    supposedly an older beta is floating around that works on destroyer, but that was before my time and i dont know about that...

    highest vcore is 1.7v, back then for am2 that was more than enough and the board has ovp implemented inside the pwm chips, which apparently cant be bypassed :/
    but for daneb 1.7v is more than enough for air and even water afaik, its only on ln2 that you need 1.9v to fully max out the chip from what ive seen.

    oh and its 5 phase, not 8 phase!
    isn't good news

    I saw 1.8 max vcore in bios

    1.8 is good for 5.5 @ ln2.
    Schedule of Live Extreme Overclocking - info Thread

    Quote Originally Posted by K404 View Post
    "My Backup is bigger than Your Backup"

  5. #5
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    34,549
    yeah, sux huh? the engineer who built that board seems to be less experienced than the one who worked on BlackOps and BloodRage
    bios options are available up to 2v, but anything above 1.7v real triggers ovp...

  6. #6
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    Poland / Rypin
    Posts
    865
    Quote Originally Posted by saaya View Post
    yeah, sux huh? the engineer who built that board seems to be less experienced than the one who worked on BlackOps and BloodRage
    bios options are available up to 2v, but anything above 1.7v real triggers ovp...
    make sure next board on nf will have 1.9 vcore and 2vmem
    Schedule of Live Extreme Overclocking - info Thread

    Quote Originally Posted by K404 View Post
    "My Backup is bigger than Your Backup"

  7. #7
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    34,549
    only 1.9 and 2v?

  8. #8
    all outta gum
    Join Date
    Dec 2006
    Location
    Poland
    Posts
    3,389
    According to ISL6324 datasheet, OVP limit could be pushed to (VDAC + 500mV) which is 1,95 V if I am correct?
    It would be nice to solve this problem as we are preparing to do some 3D benches with SLI and Deneb...
    www.teampclab.pl
    MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12

    Test bench: empty

  9. #9
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    Poland / Rypin
    Posts
    865
    Quote Originally Posted by saaya View Post
    only 1.9 and 2v?
    1.9v for cpu or if PWM will be strong as in blackops 2v will be enough

    2v for ddr3

    as I know next nforce will use DDR3 so "only" 2v

    btw

    sayaa can you tell us about next amd boards ?
    Schedule of Live Extreme Overclocking - info Thread

    Quote Originally Posted by K404 View Post
    "My Backup is bigger than Your Backup"

  10. #10
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    Poland / Rypin
    Posts
    865
    Quote Originally Posted by xoqolatl View Post
    According to ISL6324 datasheet, OVP limit could be pushed to (VDAC + 500mV) which is 1,95 V if I am correct?
    It would be nice to solve this problem as we are preparing to do some 3D benches with SLI and Deneb...
    mozesz podać jakieś szczegóły ?

    co i jak ?
    Schedule of Live Extreme Overclocking - info Thread

    Quote Originally Posted by K404 View Post
    "My Backup is bigger than Your Backup"

  11. #11
    all outta gum
    Join Date
    Dec 2006
    Location
    Poland
    Posts
    3,389
    O OVP:
    http://www.intersil.com/data/fn/fn6518.pdf

    O benchowaniu: sami za dużo nie wiemy jeszcze pewnie jutro, SLI GTX285
    www.teampclab.pl
    MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12

    Test bench: empty

  12. #12
    Xtreme Enthusiast
    Join Date
    Nov 2006
    Location
    Poland / Rypin
    Posts
    865
    sayaa, did you tried or can you try an idea of xoqolatl ?

    look like possible to do. But I remember when you said "there is no ovp mod"
    Schedule of Live Extreme Overclocking - info Thread

    Quote Originally Posted by K404 View Post
    "My Backup is bigger than Your Backup"

  13. #13
    Xtreme Mentor
    Join Date
    May 2008
    Location
    cleveland ohio
    Posts
    2,874
    Quote Originally Posted by saaya View Post
    i dont think all sliders work, but ask fatalbert
    ntune isnt... perfect :P
    it cant be compared to amds overdrive... its a shame that overdrive only works on amd chipsets...
    supposedly an older beta is floating around that works on destroyer, but that was before my time and i dont know about that...

    highest vcore is 1.7v, back then for am2 that was more than enough and the board has ovp implemented inside the pwm chips, which apparently cant be bypassed :/
    but for daneb 1.7v is more than enough for air and even water afaik, its only on ln2 that you need 1.9v to fully max out the chip from what ive seen.

    oh and its 5 phase, not 8 phase!
    http://www.xtremesystems.org/forums/...9&postcount=47

    MOB: ASUS M2N32-SLI DLX Bios 1503

    a.o.d 2.0.9
    http://downloads.guru3d.com/download.php?det=1792
    HAVE NO FEAR!
    "AMD fallen angel"
    Quote Originally Posted by Gamekiller View Post
    You didn't get the memo? 1 hour 'Fugger time' is equal to 12 hours of regular time.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •