destroyer

[msimax]

i just looked up a review of this board and they say 8 phase pwm can you confirm saaya

also whats the highest vcore allowed in the bios and does all the sliders in ntune work with this mb

thanks

[saaya]

i dont think all sliders work, but ask fatalbert
ntune isnt... perfect :P
it cant be compared to amds overdrive... its a shame that overdrive only works on amd chipsets...
supposedly an older beta is floating around that works on destroyer, but that was before my time and i dont know about that...

highest vcore is 1.7v, back then for am2 that was more than enough and the board has ovp implemented inside the pwm chips, which apparently cant be bypassed :/
but for daneb 1.7v is more than enough for air and even water afaik, its only on ln2 that you need 1.9v to fully max out the chip from what ive seen.

oh and its 5 phase, not 8 phase!

[msimax]

thanks

[FatAlbert]

i dont think all sliders work, but ask fatalbert
ntune isnt... perfect :P
it cant be compared to amds overdrive... its a shame that overdrive only works on amd chipsets...
supposedly an older beta is floating around that works on destroyer, but that was before my time and i dont know about that...

highest vcore is 1.7v, back then for am2 that was more than enough and the board has ovp implemented inside the pwm chips, which apparently cant be bypassed :/
but for daneb 1.7v is more than enough for air and even water afaik, its only on ln2 that you need 1.9v to fully max out the chip from what ive seen.

oh and its 5 phase, not 8 phase!

isn't good news

I saw 1.8 max vcore in bios

1.8 is good for 5.5 @ ln2.

[saaya]

yeah, sux huh? the engineer who built that board seems to be less experienced than the one who worked on BlackOps and BloodRage
bios options are available up to 2v, but anything above 1.7v real triggers ovp...

[FatAlbert]

yeah, sux huh? the engineer who built that board seems to be less experienced than the one who worked on BlackOps and BloodRage
bios options are available up to 2v, but anything above 1.7v real triggers ovp...

make sure next board on nf will have 1.9 vcore and 2vmem

[saaya]

only 1.9 and 2v?

[G.Foyle]

According to ISL6324 datasheet, OVP limit could be pushed to (VDAC + 500mV) which is 1,95 V if I am correct?
It would be nice to solve this problem as we are preparing to do some 3D benches with SLI and Deneb...

[FatAlbert]

only 1.9 and 2v?

1.9v for cpu or if PWM will be strong as in blackops 2v will be enough

2v for ddr3

as I know next nforce will use DDR3 so "only" 2v

btw

sayaa can you tell us about next amd boards ?

[FatAlbert]

According to ISL6324 datasheet, OVP limit could be pushed to (VDAC + 500mV) which is 1,95 V if I am correct?
It would be nice to solve this problem as we are preparing to do some 3D benches with SLI and Deneb...

mozesz podać jakieś szczegóły ?

co i jak ?

[G.Foyle]

O OVP:
http://www.intersil.com/data/fn/fn6518.pdf

O benchowaniu: sami za dużo nie wiemy jeszcze pewnie jutro, SLI GTX285

[FatAlbert]

sayaa, did you tried or can you try an idea of xoqolatl ?

look like possible to do. But I remember when you said "there is no ovp mod"

[demonkevy666]

i dont think all sliders work, but ask fatalbert
ntune isnt... perfect :P
it cant be compared to amds overdrive... its a shame that overdrive only works on amd chipsets...
supposedly an older beta is floating around that works on destroyer, but that was before my time and i dont know about that...

highest vcore is 1.7v, back then for am2 that was more than enough and the board has ovp implemented inside the pwm chips, which apparently cant be bypassed :/
but for daneb 1.7v is more than enough for air and even water afaik, its only on ln2 that you need 1.9v to fully max out the chip from what ive seen.

oh and its 5 phase, not 8 phase!

http://www.xtremesystems.org/forums/...9&postcount=47

MOB: ASUS M2N32-SLI DLX Bios 1503

a.o.d 2.0.9
http://downloads.guru3d.com/download.php?det=1792